- Cross-linked polymer coated Pd nanocatalysts on SiO2 support: Very selective and stable catalysts for hydrogenation in supercritical CO 2
-
Using greener solvents, enhancing the selectivity and stability of catalysts is an important aspect of green chemistry. In this work, we developed a route to immobilize Pd nanoparticles on the surface of silica particles with cross-linked polystyrene coating by one-step copolymerization, and Pd(0) nanocatalysts supported on the silica particle supports with cross-linked polystyrene coating were successfully prepared. The catalysts were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), plasma optical emission spectroscopy, and thermogravimetric analysis (TGA), and were used for hydrogenation of 2,4-dimethyl-1,3-pentadiene to produce 2,4-dimethyl-2-pentene and allyl alcohol to produce 1-propanol. It was found that the selectivity of the reaction was enhanced significantly by the polymer coating, and the catalysts were very stable due to the insoluble nature of the cross-linked polymers. Supercritical (sc)CO2 can accelerate the reaction rates of the reactions catalyzed by the specially designed catalysts significantly. The excellent combination of polymer coating and scCO2 has wide potential applications in catalysis.
- Wu, Tianbin,Jiang, Tao,Hu, Baoji,Han, Buxing,He, Jinling,Zhou, Xiaosi
-
-
Read Online
- Dimerization method for high activity and selectivity propylene
-
The invention provides a dimerization method for high activity and selectivity propylene. The method includes the following steps that methylaluminoxane (MAO) or modified methylaluminoxane (MMAO) is used as a catalyst promoter, and the propylene is subjected to a dimerization reaction under the catalytic action of an ethylidene bridged substituted diindene titanium group metal complex catalyst; and the ethylidene bridged substituted diindene titanium group metal complex catalyst is an internal compensation (meso-) ethylidene bridged substituted diindene titanium group metal complex catalyst or a racemization (rac-) ethylidene bridged substituted diindene titanium group metal complex catalyst. Compared with the prior art, the dimerization method provided by the invention is high in catalytic activity and high in dimerization selectivity, the rate can reach 99%, numerous follow-up operation steps in separation of products with the high degree of polymerization are omitted, the industrialization cost is reduced, and the industrial production needs can be met.
- -
-
Paragraph 0114; 0115; 0116; 0118-0121; 0124-0139; 0142-0153
(2017/06/02)
-
- DIARYL AMINE ANTIOXIDANTS PREPARED FROM BRANCHED OLEFINS
-
Diaryl amines are selectively alkylated by reaction with branched olefins, which olefins are capable of forming tertiary carbonium ions and can be conveniently prepared from readily available branched alcohols. The diaryl amine products are effective antioxidants and often comprise a high amount of di-alkylated diaryl amines and a low amount of tri- and tetra-alkylated diaryl amines.
- -
-
Paragraph 0028; 0058; 0059
(2017/02/09)
-
- Water-Enabled Catalytic Asymmetric Michael Reactions of Unreactive Nitroalkenes: One-Pot Synthesis of Chiral GABA-Analogs with All-Carbon Quaternary Stereogenic Centers
-
Water enables new catalytic reactions for otherwise unreactive substrate systems. Under the “on water” reaction conditions, extremely unreactive β,β-disubstituted nitroalkenes smoothly underwent enantioselective Michael addition reactions with dithiomalonates using a chiral squaramide catalyst, affording both enantiomers of highly enantioenriched Michael adducts with all-carbon-substituted quaternary centers. The developed “on water” protocol was successfully applied for the scalable one-pot syntheses of chiral GABA analogs with all-carbon quaternary stereogenic centers at the β-position, which might show highly interesting pharmaceutical properties.
- Sim, Jae Hun,Song, Choong Eui
-
supporting information
p. 1835 - 1839
(2017/02/05)
-
- Alkanethiolate-capped palladium nanoparticles for selective catalytic hydrogenation of dienes and trienes
-
Selective hydrogenation of dienes and trienes is an important process in the pharmaceutical and chemical industries. Our group previously reported that the thiosulfate protocol using a sodium S-alkylthiosulfate ligand could generate catalytically active Pd nanoparticles (PdNP) capped with a lower density of alkanethiolate ligands. This homogeneously soluble PdNP catalyst offers several advantages such as little contamination via Pd leaching and easy separation and recycling. In addition, the high activity of PdNP allows the reactions to be completed under mild conditions, at room temperature and atmospheric pressure. Herein, a PdNP catalyst capped with octanethiolate ligands (C8 PdNP) is investigated for the selective hydrogenation of conjugated dienes into monoenes. The strong influence of the thiolate ligands on the chemical and electronic properties of the Pd surface is confirmed by mechanistic studies and highly selective catalysis results. The studies also suggest two major routes for the conjugated diene hydrogenation: the 1,2-addition and 1,4-addition of hydrogen. The selectivity between two mono-hydrogenation products is controlled by the steric interaction of substrates and the thermodynamic stability of products. The catalytic hydrogenation of trienes also results in the almost quantitative formation of mono-hydrogenation products, the isolated dienes, from both ocimene and myrcene.
- Chen, Ting-An,Shon, Young-Seok
-
p. 4823 - 4829
(2017/10/19)
-
- One-step hydroprocessing of fatty acids into renewable aromatic hydrocarbons over Ni/HZSM-5: Insights into the major reaction pathways
-
For high caloricity and stability in bio-aviation fuels, a certain content of aromatic hydrocarbons (AHCs, 8-25 wt%) is crucial. Fatty acids, obtained from waste or inedible oils, are a renewable and economic feedstock for AHC production. Considerable amounts of AHCs, up to 64.61 wt%, were produced through the one-step hydroprocessing of fatty acids over Ni/HZSM-5 catalysts. Hydrogenation, hydrocracking, and aromatization constituted the principal AHC formation processes. At a lower temperature, fatty acids were first hydrosaturated and then hydrodeoxygenated at metal sites to form long-chain hydrocarbons. Alternatively, the unsaturated fatty acids could be directly deoxygenated at acid sites without first being saturated. The long-chain hydrocarbons were cracked into gases such as ethane, propane, and C6-C8 olefins over the catalysts' Br?nsted acid sites; these underwent Diels-Alder reactions on the catalysts' Lewis acid sites to form AHCs. C6-C8 olefins were determined as critical intermediates for AHC formation. As the Ni content in the catalyst increased, the Br?nsted-acid site density was reduced due to coverage by the metal nanoparticles. Good performance was achieved with a loading of 10 wt% Ni, where the Ni nanoparticles exhibited a polyhedral morphology which exposed more active sites for aromatization.
- Xing, Shiyou,Lv, Pengmei,Wang, Jiayan,Fu, Junying,Fan, Pei,Yang, Lingmei,Yang, Gaixiu,Yuan, Zhenhong,Chen, Yong
-
p. 2961 - 2973
(2017/02/05)
-
- Hafnocene catalysts for selective propylene oligomerization: Efficient synthesis of 4-methyl-1-pentene by β-methyl transfer
-
A series of hafnocene complexes (η5-C5Me 4R1)(η5-C5Me4R 2)HfCl2 with [R1, R2] = [H, H] (1), [Me, H] (2), [Me, Me] (3), [Et, Me] (4), [iPr, Me] (5), [SiMe 3, Me] (6), [tBu, Me] (7), [nBu, Me] (8), [tBu, Me] (9), [Et, Et] (10), [nBu, nBu] (11), [iBu, iBu] (12) was tested as catalyst precursors for propylene oligomerization. Upon activation with methylaluminoxane or [Ph 3C][B(C6F5)4]AliBu 3, complexes 2-4 and 8-12 catalyzed the dimerization of propylene to produce 4-methyl-1-pentene with selectivities ranging from 23.9 to 61.6 wt % in the product mixture. The selectivity was dependent on the nature of the substituents R1 and R2, with the highest value found for (η5-C5Me4iBu) 2HfCl2 (12). Rapid deactivation was observed for 5-7, whereas (η5-C5Me4H)2HfCl 2 (1) polymerized propylene. 4-Methyl-1-pentene is proposed to form by repeated 1,2-insertion of propylene into the hafnocene methyl cation, followed by selective β-methyl elimination. Detailed analysis of the byproduct distribution (isobutene, 1-pentene, 2-methyl-1-pentene, 2,4-dimethyl-1-pentene, 4-methyl-1-heptene, 4,6-dimethyl-1-heptene), determined by gas chromatography, was performed with the aid of a stochastic simulation involving rate constants for the propagation by insertion, β-hydride elimination, and β-methyl elimination. The rate of termination is dependent on the structure of the growing chain of the active species as well as on the bulkiness of the cyclopentadienyl ligands. The selectivity highly depends on the reaction conditions (pressure, temperature, concentration of methylaluminoxane). The rates of β-methyl elimination leading to 4-methyl-1-pentene were proportional to propylene pressure for 2-4 and 8-10 but practically independent from propylene pressure for the sterically bulkier derivatives 11-12.
- Suzuki, Yasuhiko,Yasumoto, Takahiro,Mashima, Kazushi,Okuda, Jun
-
p. 13017 - 13025
(2008/02/08)
-
- Silica-supported dendrimer-palladium complex-catalyzed selective hydrogenation of dienes to monoolefins
-
The selective hydrogenation of cyclic and acyclic dienes to monoolefins occurs under very mild conditions, in the presence of silica-supported PAMAM-Pd complexes. The activity and selectivity of this reaction is sensitive to the dendrimer structure. These dendritic complexes display excellent recycle properties, retaining activity for up to eight recycles.
- Zweni, Pumza P.,Alper, Howard
-
p. 725 - 731
(2007/10/03)
-
- On the Mechanism of Oligomerization of Propylene by (C5Me5)2MCl2/Methylalumoxane Catalysts (M=Zr, Hf)
-
In the oligomerization of propylene by (C5Me5)2MCl2 (M=Zr, Hf)/methylalumoxane, formation of abnormal oligomers such as 1-pentene(C5), 2,4-dimethyl-1-pentene(C7), 4-methyl-1-heptene(C8), and 2,4,6-trimethyl-1-heptene(C10) besides normal oligomers such as 4-methyl-1-pentene(C6) and 4,6-dimethyl-1-heptene(C9) is indicative of the mixing of unusual β-CH3 and usual β-H transfer terminations from each growing carbon chain which was initiated by insertion of propylene into either M-H or M-Me bond.
- Mise, Takaya,Kageyama, Akiko,Miya, Shinya,Yamazaki, Hiroshi
-
p. 1525 - 1528
(2007/10/02)
-
- Ring-opening of Alkyl-substituted Cyclopropanes in the Presence of Hydrogen on Copper
-
In the presence of hydrogen on copper, the cyclopropanes (1), (2), and (3) are transformed into saturated hydrocarbons containing the same number of carbon atoms (alkenes are also formed, through isomerization of the cyclopropanes); these studies reveal the importance of a previously unknown property of copper in heterogeneous metal catalysis.
- Bartok, Mihaly,Palinko, Istvan,Molnar, Arpad
-
p. 953 - 954
(2007/10/02)
-
- Correlation of Alkyl and Polar Substituents at the Alcoholic Side of Tertiary Acetates with the Rate of Pyrolyses in the Gas Phase
-
The rate coefficients for the gas-phase pyrolysis of several tertiary acetates have been measured in a static system over the temperature range of 220-340 deg C and pressure range of 40-186 torr.In seasoned vessels the reactions are homogeneous, follow a first-order rate law, and are unimolecular.The temperature dependence of the rate coefficients is given by the following Arrhenius equations: for 3,3,3-trichloro-2-methyl-2-propyl acetate, log k1 (s-1) = (13.86 +/- 0.35) - (188.8 +/- 3.8) kJ mol-1 (2.303 RT)-1; for methyl α-acetoxyisobutyrate, log k1 (s-1) = (12.42 +/- 0.28) - (174.6 +/- 3.2) kJ mol-1 (2.303 RT)-1; for 2-methyl-2-hexyl acetate, log k1 (s-1) = (13.35 +/- 0.33) - (166.1 +/- 3.4) kJ mol-1 (2.303 RT)-1; for 2,4-dimethyl-2-pentyl acetate, log k1 (s-1) = (12.42 +/- 0.19) - (154.1 +/- 1.9) kJ mol-1 (2.303 RT)-1; for 2-methyl-2-acetoxy-4-phenylbutane, log k1 (s-1) = (11.97 +/- 0.55) - (151.5 +/-5.6) kJ mol-1 (2.303 RT)-1.The effectof substituents in the gas-phase elimination of 2-substituted 2-propyl acetates may be either electronic or steric in nature.The linear correlations for electron-releasing groups and for electron-withdrawing groups are presented and discussed.The results of the present work together with those reported in the literature lead to the establishment of a possible generalization on the influence of substituents at the alcohols side of primary, secondary, and tertiary acetates pyrolyses in the gas phase.
- Gonzalez, Neil,Martin, Ignacio,Chuchani, Gabriel
-
p. 1314 - 1318
(2007/10/02)
-
- Electrophilic Cleavage of Cyclopropanes. Acetolysis of Alkylcyclopropanes
-
The solvent kinetic hydrogen isotope effect showed that proton transfer is at least partially rate determining for the acetolysis of cyclopropanes which span a range of 1010 in reactivity.The energies and structures of protonated cyclobutanes were calculated and provide an explanation for the large difference in reactivity between cyclopropanes and cyclobutanes despite their similarity in enthalpies of reaction.The rates and products of acetolysis of a series of alkyl-substituted cyclopropanes were examined.The data, along with the results of ab initio calculations, indicate that for alkyl-substituted cyclopropanes, the protonated species is highly unsymmetrical.Cleavage of the cyclopropane ring always occurs so that the nucleophile becomes attached to the most substituted carbon, but the proton may attack either of the remaining carbons.Proton attack may lead to either retention or inversion of configuration depending on the orientation of the attacking proton with respect to the ring.
- Wiberg, Kenneth B.,Kass, Steven R.
-
p. 988 - 995
(2007/10/02)
-
- Regioselectivity of the Protolysis of (η3-Allyl)bis(η5-cyclopentadienyl)titanium Complexes with Hydrogen Chloride
-
Reaction of the (η3-allyl)bis(cyclopentadienyl)titanium compounds 1, 2 and 5, in which the allyl group is alkyl substituted in position 1 or 1 and 2, with hydrogen chloride has an opposite regioselectivity in ether to that in tetrahydrofuran.In ether, attack by the proton occurs preferentially on the unsubstituted C-3 while in tetrahydrofuran the preferred position for attack is C-1.
- Lehmkuhl, Herbert,Fustero, Santos
-
p. 1371 - 1375
(2007/10/02)
-
