- Synthesis, coordination and catalytic use of phosphinoferrocene ligands bearing 6-phospha-2,4,6-trioxaadamantane P-donor moieties
-
1,1’-Bis(diphenylphosphino)ferrocene (dppf) and structurally related ferrocene bis-phosphines are indispensable ligands for coordination chemistry and catalysis. This contribution focuses on the coordination behaviour and catalytic properties of two dppf congeners bearing 1,3,5,7-tetramethyl-2,4,6-trioxa-8-phosphatricyclo[3.3.1.13,7]decane-8-yl groups (CgP) as the P-donor moieties, viz. Ph2PfcCgP (1) and its semi-homologous counterpart Ph2PfcCH2CgP (2; fc = ferrocene-1,1’-diyl). In reactions with a PdCl2 source, compound 1 produced exclusively the cis-chelate complex [PdCl2(1-κ2P,P’)], while the homologated ligand 2 afforded a complex mixture of compounds which equilibrated upon heating in methanol in favour of the symmetrical dimeric complex trans-[(μ-2)PdCl2]2 as a mixture of racemic and meso isomers. Notably, in aqueous Pd-catalysed cyanation of aryl bromides and Suzuki-Miyaura-type cross-coupling of benzoyl chlorides with boronic acids producing benzophenones, catalysts generated in situ from bis-phosphine 1 and Pd(II) sources were often more active than their counterparts resulting from dppf and 2.
- ?těpni?ka, Petr,Císa?ová, Ivana,Horky, Filip
-
-
- Palladium-catalyzed synthesis of nitriles from N-phthaloyl hydrazones
-
The Pd-catalyzed transformation of N-phthaloyl hydrazones into nitriles involving the cleavage of an N-N bond is reported. The use of N-heterocyclic carbene as a ligand is essential for the success of the reaction. N-Phthaloyl hydrazones prepared from aromatic aldehydes or cyclobutanones are applicable to this transformation, which gives aryl or alkenyl nitriles, respectively.
- Ano, Yusuke,Chatani, Naoto,Higashino, Masaya,Yamada, Yuki
-
supporting information
p. 3799 - 3802
(2022/04/07)
-
- Cyanide-Free Cyanation of sp2 and sp-Carbon Atoms by an Oxazole-Based Masked CN Source Using Flow Microreactors
-
This work reports a cyanide-free continuous-flow process for cyanation of sp2 and sp carbons to synthesize aryl, vinyl and acetylenic nitriles from (5-methyl-2-phenyloxazol-4-yl) boronic acid [OxBA] reagent as a sole source of carbon-bound mask
- Sharma, Brijesh M.,Nikam, Arun V.,Lahore, Santosh,Ahn, Gwang-Noh,Kim, Dong-Pyo
-
supporting information
(2022/02/25)
-
- Recyclable and Reusable Pd(OAc)2/XPhos–SO3Na/PEG-400/H2O System for Cyanation of Aryl Chlorides with Potassium Ferrocyanide
-
Pd(OAc)2/XPhos–SO3Na in a mixture of poly(ethylene glycol) (PEG-400) and water is shown to be a highly efficient catalyst for the cyanation of aryl chlorides with potassium ferrocyanide. The reaction proceeded smoothly at 100 or 120?oC with K2CO3 or KOAc as base, delivering a variety of aromatic nitriles in good to excellent yields. The isolation of the crude products is facilely performed by extraction with cyclohexane and more importantly, both expensive Pd(OAc)2 and XPhos–SO3Na in PEG-400/H2O system could be easily recycled and reused at least six times without any apparent loss of catalytic efficiency. Graphical Abstract: Palladium-catalyzed cyanation of aryl chlorides with potassium ferrocyanide leading to aryl nitriles by using Pd(OAc)2/XPhos–SO3Na/PEG-400/H2O as a highly efficient and recyclable catalytic system is described.[Figure not available: see fulltext.]
- Cai, Mingzhong,Huang, Bin,Liu, Rong,Xu, Caifeng
-
-
- Method for catalyzing oxidation of amines to generate nitrile by using nonmetal mesoporous nitrogen-doped carbon material
-
The invention discloses a method for preparing nitrile by catalyzing amine oxidation with a non-metal mesoporous nitrogen-doped carbon material catalyst, which is applied to the field of synthesis, the material is prepared by using a nitrogen-containing organic ligand as a precursor and silica sol as a template agent, calcining in the atmosphere of inert gases such as N2 or Ar and then removing the template agent; oxygen or air is used as an oxygen source, the reaction is performed at 80-130 DEG C under the action of ammonia water in the presence of a solvent, the effect is good, and the product still keeps higher activity after being recycled for more than 8 times, and has a wide industrial application prospect. The invention provides a heterogeneous non-metal catalytic system for catalyzing amine oxidation to prepare nitrile for the first time, and compared with a reported metal catalyst, the heterogeneous non-metal catalytic system does not bring metal pollution to a product to influence the effect of cyano drugs.
- -
-
Paragraph 0019; 0036
(2021/05/08)
-
- Product selectivity controlled by manganese oxide crystals in catalytic ammoxidation
-
The performances of heterogeneous catalysts can be effectively tuned by changing the catalyst structures. Here we report a controllable nitrile synthesis from alcohol ammoxidation, where the nitrile hydration side reaction could be efficiently prevented by changing the manganese oxide catalysts. α-Mn2O3 based catalysts are highly selective for nitrile synthesis, but MnO2-based catalysts including α, β, γ, and δ phases favour the amide production from tandem ammoxidation and hydration steps. Multiple structural, kinetic, and spectroscopic investigations reveal that water decomposition is hindered on α-Mn2O3, thus to switch off the nitrile hydration. In addition, the selectivity-control feature of manganese oxide catalysts is mainly related to their crystalline nature rather than oxide morphology, although the morphological issue is usually regarded as a crucial factor in many reactions.
- Hui, Yu,Luo, Qingsong,Qin, Yucai,Song, Lijuan,Wang, Hai,Wang, Liang,Xiao, Feng-Shou
-
p. 2164 - 2172
(2021/09/20)
-
- Visible-Light-Promoted Metal-Free Synthesis of (Hetero)Aromatic Nitriles from C(sp3)?H Bonds**
-
The metal-free activation of C(sp3)?H bonds to value-added products is of paramount importance in organic synthesis. We report the use of the commercially available organic dye 2,4,6-triphenylpyrylium tetrafluoroborate (TPP) for the conversion of methylarenes to the corresponding aryl nitriles via a photocatalytic process. Applying this methodology, a variety of cyanobenzenes have been synthesized in good to excellent yield under metal- and cyanide-free conditions. We demonstrate the scope of the method with over 50 examples including late-stage functionalization of drug molecules (celecoxib) and complex structures such as l-menthol, amino acids, and cholesterol derivatives. Furthermore, the presented synthetic protocol is applicable for gram-scale reactions. In addition to methylarenes, selected examples for the cyanation of aldehydes, alcohols and oximes are demonstrated as well. Detailed mechanistic investigations have been carried out using time-resolved luminescence quenching studies, control experiments, and NMR spectroscopy as well as kinetic studies, all supporting the proposed catalytic cycle.
- Murugesan, Kathiravan,Donabauer, Karsten,K?nig, Burkhard
-
supporting information
p. 2439 - 2445
(2020/12/07)
-
- Cross-Coupling through Ag(I)/Ag(III) Redox Manifold
-
In ample variety of transformations, the presence of silver as an additive or co-catalyst is believed to be innocuous for the efficiency of the operating metal catalyst. Even though Ag additives are required often as coupling partners, oxidants or halide scavengers, its role as a catalytically competent species is widely neglected in cross-coupling reactions. Most likely, this is due to the erroneously assumed incapacity of Ag to undergo 2e? redox steps. Definite proof is herein provided for the required elementary steps to accomplish the oxidative trifluoromethylation of arenes through AgI/AgIII redox catalysis (i. e. CEL coupling), namely: i) easy AgI/AgIII 2e? oxidation mediated by air; ii) bpy/phen ligation to AgIII; iii) boron-to-AgIII aryl transfer; and iv) ulterior reductive elimination of benzotrifluorides from an [aryl-AgIII-CF3] fragment. More precisely, an ultimate entry and full characterization of organosilver(III) compounds [K]+[AgIII(CF3)4]? (K-1), [(bpy)AgIII(CF3)3] (2) and [(phen)AgIII(CF3)3] (3), is described. The utility of 3 in cross-coupling has been showcased unambiguously, and a large variety of arylboron compounds was trifluoromethylated via [AgIII(aryl)(CF3)3]? intermediates. This work breaks with old stereotypes and misconceptions regarding the inability of Ag to undergo cross-coupling by itself.
- Demonti, Luca,Mézailles, Nicolas,Nebra, Noel,Saffon-Merceron, Nathalie
-
supporting information
p. 15396 - 15405
(2021/10/12)
-
- Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex
-
A terminal [Ni-OH] complex1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst1is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of1towards amide reduction follows an inverse trend,i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.
- Bera, Jitendra K.,Pandey, Pragati
-
supporting information
p. 9204 - 9207
(2021/09/20)
-
- Development and Molecular Understanding of a Pd-Catalyzed Cyanation of Aryl Boronic Acids Enabled by High-Throughput Experimentation and Data Analysis
-
A synthetic method for the palladium-catalyzed cyanation of aryl boronic acids using bench stable and non-toxic N-cyanosuccinimide has been developed. High-throughput experimentation facilitated the screen of 90 different ligands and the resultant statistical data analysis identified that ligand σ-donation, π-acidity and sterics are key drivers that govern yield. Categorization into three ligand groups – monophosphines, bisphosphines and miscellaneous – was performed before the analysis. For the monophosphines, the yield of the reaction increases for strong σ-donating, weak π-accepting ligands, with flexible pendant substituents. For the bisphosphines, the yield predominantly correlates with ligand lability. The applicability of the designed reaction to a wider substrate scope was investigated, showing good functional group tolerance in particular with boronic acids bearing electron-withdrawing substituents. This work outlines the development of a novel reaction, coupled with a fast and efficient workflow to gain understanding of the optimal ligand properties for the design of improved palladium cross-coupling catalysts.
- De Jesus Silva, Jordan,Bartalucci, Niccolò,Jelier, Benson,Grosslight, Samantha,Gensch, Tobias,Schünemann, Claas,Müller, Bernd,Kamer, Paul C. J.,Copéret, Christophe,Sigman, Matthew S.,Togni, Antonio
-
-
- Rational Design and Development of Low-Price, Scalable, Shelf-Stable and Broadly Applicable Electrophilic Sulfonium Ylide-Based Trifluoromethylating Reagents
-
The development of two highly reactive electrophilic trifluoromethylating reagents (trifluoromethyl)(4-nitrophenyl)bis(carbomethoxy)methylide (1g) and (trifluoromethyl)(3-chlorophenyl)bis(carbomethoxy)methylide (1j) through structure-activity study was described. Under mild conditions, reagent 1g reacted with β-ketoesters and silyl enol ethers to give α-trifluoromethylated-β-ketoesters or α-trifluoromethylated ketones in high yields. In addition, reagent 1g could serve as a trifluoromethyl radical for a variety of trifluoromethylative transformations under visible light irradiation, including radical trifluoromethylation of electron-rich indoles and pyrroles and sodium aryl sulfinates as well as trifluoromethylative difunctionalization with styrene derivatives. On the other hand, as a complimentary, under reductive coupling conditions, reagent 1j reacted with a variety of (hetero)aryl iodides for the formation of trifluoromethylated (hetero)arenes.
- Ge, Hangming,Ling, Yijing,Liu, Yafei,Lu, Long,Shen, Qilong
-
p. 1667 - 1682
(2021/05/28)
-
- Copper-promoted cyanation of aryl iodides with N,N-dimethyl aminomalononitrile
-
A copper-promoted cyanation of aryl iodides has been successfully developed by using N,N-dimethyl aminomalononitrile as the cyanide source with moderate toxicity and better stability. This reaction features broad substrate scope, excellent reaction yields, readily available catalyst, and simple reaction conditions.
- Liu, Si-Zhan,Li, Jing,Xue, Cao-Gen,Xu, Xue-Tao,Lei, Lin-Sheng,Huo, Chen-Yu,Wang, Zhen,Wang, Shao-Hua
-
supporting information
(2021/02/01)
-
- Iodine Promoted Conversion of Esters to Nitriles and Ketones under Metal-Free Conditions
-
We report a novel strategy to prepare valuable nitriles and ketones through the conversion of esters under metal-free conditions. By using the I2/PCl3 system, various substrates including aliphatic and aromatic esters could react with acetonitrile and arenes to afford the desired products in good to excellent yields. This method is compatible with a number of functional groups and provides a simple and practical approach for the synthesis of nitrile compounds and aryl ketones.
- Xiao, Jing,Guo, Fengzhe,Li, Yinfeng,Li, Fangshao,Li, Qiang,Tang, Zi-Long
-
p. 2028 - 2035
(2021/02/03)
-
- Acceptorless dehydrogenation of amines to nitriles catalyzed by N-heterocyclic carbene-nitrogen-phosphine chelated bimetallic ruthenium (II) complex
-
We have developed a clean, atom-economical and environmentally friendly route for acceptorless dehydrogenation of amines to nitriles by combining a new dual N-heterocyclic carbene-nitrogen-phosphine ligand R(CNP)2 (R = o-xylyl) with a ruthenium precursor [RuCl2(η6-C6H6)]2. In this system, the electronic and steric factors of amines had a negligible influence on the reaction and a broad range of functional groups were well tolerated. All of the investigated amines could be converted to nitriles in good yield of up to 99% with excellent selectivity. The unprecedented catalytic performance of this system is attributed to the synergistic effect of two ruthenium centers chelated by R(CNP)2 and a plausible reaction mechanism is proposed according to the active species found via in situ NMR and HRMS.
- Chen, Hua,Fu, Haiyan,Ji, Li,Li, Ruixiang,Nie, Xufeng,Zheng, Yanling
-
p. 378 - 385
(2020/10/02)
-
- Aerobic dehydrogenation of amines to nitriles catalyzed by triazolylidene ruthenium complexes with O2 as terminal oxidant
-
Pyridyl-substituted mesoionic triazolylidene ruthenium cymene complexes catalyze the oxidation of both aromatic and aliphatic amines to nitriles with high activity and selectivity under benign conditions using dioxygen as the terminal oxidant. Modification on the pyridyl moiety of the ligand scaffold has negligible effect on the catalytic performance, while substituents on the triazolylidene directly affect the catalytic fitness of the metal center, leading to distinct catalytic profiles. Pre-dissociation of the cymene ligand and formation of a solvento analogue further enhances the catalytic activity towards nitrile formation. Variation of reaction conditions provided valuable mechanistic insights and resulted in a highly efficient protocol for nitrile formation with maximum turnover numbers around 10?000. The turnover frequency reaches up to 400 h-1, providing one of the fastest catalytic systems known to date for this transformation.
- Albrecht, Martin,Kn?rr, Pascal,Olivares, Marta
-
p. 1981 - 1991
(2020/02/21)
-
- Lewis acid promoted dehydration of amides to nitriles catalyzed by [PSiP]-pincer iron hydrides
-
The dehydration of primary amides to their corresponding nitriles using four [PSiP]-pincer hydrido iron complexes 1–4 [(2-Ph2PC6H4)2MeSiFe(H)(PMe3)2 (1), (2-Ph2PC6H4)2HSiFe(H)(PMe3)2 (2), (2-(iPr)2PC6H4)2HSiFe(H)(PMe3)2 (3) and (2-(iPr)2PC6H4)2MeSiFe(H)(PMe3)2 (4)] as catalysts in the presence of (EtO)3SiH as dehydrating reagent was explored in the good to excellent yields. It was proved for the first time that Lewis acid could significantly promote this catalytic system under milder reaction conditions than other Lewis acid-promoted system, such as shorter reaction time or lower reaction temperature. This is also the first example that dehydration of primary amides to nitriles was catalyzed by silyl hydrido iron complexes bearing [PSiP]-pincer ligands with Lewis acid as additive. This catalytic system has good tolerance for many substituents. Among the four iron hydrides 1 is the best catalyst. The effects of substituents of the [PSiP]-pincer ligands on the catalytic activity of the iron hydrides were discussed. A catalytic reaction mechanism was proposed. Complex 4 is a new iron complex and was fully characterized. The molecular structure of 4 was determined by single crystal X-ray diffraction.
- Chang, Guoliang,Li, Xiaoyan,Zhang, Peng,Yang, Wenjing,Li, Kai,Wang, Yajie,Sun, Hongjian,Fuhr, Olaf,Fenske, Dieter
-
-
- Method for catalyzing receptor-free dehydrogenation of primary amine to generate nitrile by Ru coordination compound
-
The invention discloses a method for catalyzing receptor-free dehydrogenation of primary amine to generate nitrile by a Ru coordination compound. The method comprises: adding a Ru coordination compound, an alkali, a primary amine and an organic solvent into a reaction test tube according to a mol ratio of 1:100:(100-500):1000-3000, and carrying out a stirring reaction under the condition of 80 to120 DEG C; and when gas chromatography monitors that the raw materials completely disappear, stopping the reaction, collecting the reaction solution, centrifuging the reaction solution, taking the supernatant, extracting with dichloromethane, merging the organic phases, drying, filtering, evaporating the organic solvent under reduced pressure to obtain a filtrate, and carrying out column chromatography purification on the filtrate to obtain the target product nitrile. According to the invention, the catalyst is good in activity, single in catalytic system, good in product selectivity, simple in subsequent treatment and good in system universality after the reaction is finished, has a good catalytic effect on various aryl, alkyl and heteroaryl substituted primary amines, and also has a gooddehydrogenation performance on secondary amines.
- -
-
Paragraph 0034-0039; 0094-0099
(2020/09/16)
-
- Palladium-Catalyzed Cyanation of Aryl Halides Using Formamide and Cyanuric Chloride as a New “CN” Source
-
A new source of “CN” employing formamide and cyanuric chloride is introduced for the cyanation reactions. The treatment of formamide and 2,4,6-trichloro-1,3,5-triazine (TCT; cyanuric chloride) afforded an efficient cyanating agent which it can be used as a nontoxic, readily available, and non-expensive reagent in the cyanation transformations. In this study, palladium-catalyzed cyanation of aryl halides was successfully accomplished using this new “CN” source in high yields.
- Niknam, Esmaeil,Panahi, Farhad,Khalafi-Nezhad, Ali
-
p. 2699 - 2707
(2020/04/08)
-
- Metal-free dehydrosulfurization of thioamides to nitriles under visible light
-
A visible light-mediated, metal-free dehydrosulfurization reaction of thioamides to nitriles is described. This reaction features high yields, mild reaction conditions, and the use of a cheap organic dye as the photoredox catalyst and air as the oxidant.
- Xu, Tianxiao,Cao, Tianpeng,Feng, Qingyuan,Huang, Shenlin,Liao, Saihu
-
supporting information
p. 5151 - 5153
(2020/05/26)
-
- Synthesis of nitriles via the iodine-mediated dehydrosulfurization of thioamides
-
A simple general method for the synthesis of nitriles using the inexpensive and easy to handle iodine (I2) is described herein. The reaction of thioamides with I2 in the presence of triethylamine at room temperature under aerobic conditions afforded various nitriles bearing aryl, vinyl, and alkyl groups in good-to-excellent yields. This method was also effective for conversion from thioureas to cyanamides.
- Murata, Yuki,Iwasa, Hitomi,Matsumura, Mio,Yasuike, Shuji
-
p. 679 - 681
(2020/07/30)
-
- An Efficient Synthesis of Nitriles from Aldoximes in the Presence of Trifluoromethanesulfonic Anhydride in Mild Conditions
-
Abstract: A new and convenient protocol has been proposed for the transformation of aldoximes to nitriles using trifluoromethanesulfonic anhydride and triethylamine. The proposed method allows a range of aldoximes, including aromatic, heterocyclic, aliphatic, and cycloaliphatic aldoximes, to be converted to the corresponding nitriles in good to excellent yields.
- Uludag, N.
-
p. 1640 - 1645
(2020/10/22)
-
- SO2F2-Mediated one-pot cascade process for transformation of aldehydes (RCHO) to cyanamides (RNHCN)
-
A simple, mild and practical cascade process for the direct conversion of aldehydes to cyanamides was developed featuring a wide substrate scope and great functional group tolerability. This method allows for transformations of readily available, inexpensive, and abundant aldehydes to highly valuable cyanamides in a pot, atom, and step-economical manner with a green nitrogen source. This protocol will serve as a robust tool for the installation of the cyanamide moiety in various complicated molecules.
- Ding, Chengrong,Ge, Shuting,Wei, Junjie,Zhang, Guofu,Zhao, Yiyong
-
p. 17288 - 17292
(2020/05/18)
-
- Metallaphotoredox Perfluoroalkylation of Organobromides
-
Ruppert-Prakash type reagents (TMSCF3, TMSC2F5, and TMSC3F7) are readily available, air-stable, and easy-to-handle fluoroalkyl sources. Herein, we describe a mild, copper-catalyzed cross-coupling of these fluoroalkyl nucleophiles with aryl and alkyl bromides to produce a diverse array of trifluoromethyl, pentafluoroethyl, and heptafluoropropyl adducts. This light-mediated transformation proceeds via a silyl-radical-mediated halogen atom abstraction pathway, which enables perfluoroalkylation of a broad range of organobromides of variable steric and electronic demand. The utility of the method is demonstrated through the late-stage functionalization of several drug analogues.
- Zhao, Xiangbo,MacMillan, David W. C.
-
supporting information
p. 19480 - 19486
(2020/12/18)
-
- Reductive cyanation of organic chlorides using CO2 and NH3 via Triphos–Ni(I) species
-
Cyano-containing compounds constitute important pharmaceuticals, agrochemicals and organic materials. Traditional cyanation methods often rely on the use of toxic metal cyanides which have serious disposal, storage and transportation issues. Therefore, there is an increasing need to develop general and efficient catalytic methods for cyanide-free production of nitriles. Here we report the reductive cyanation of organic chlorides using CO2/NH3 as the electrophilic CN source. The use of tridentate phosphine ligand Triphos allows for the nickel-catalyzed cyanation of a broad array of aryl and aliphatic chlorides to produce the desired nitrile products in good yields, and with excellent functional group tolerance. Cheap and bench-stable urea was also shown as suitable CN source, suggesting promising application potential. Mechanistic studies imply that Triphos-Ni(I) species are responsible for the reductive C-C coupling approach involving isocyanate intermediates. This method expands the application potential of reductive cyanation in the synthesis of functionalized nitrile compounds under cyanide-free conditions, which is valuable for safe synthesis of (isotope-labeled) drugs.
- Dong, Yanan,Li, Yuehui,Yang, Peiju,Zhao, Shizhen
-
-
- Atomically Dispersed Ru on Manganese Oxide Catalyst Boosts Oxidative Cyanation
-
There is a strong incentive for environmentally benign and sustainable production of organic nitriles to avoid the use of toxic cyanides. Here we report that manganese oxide nanorod-supported single-site Ru catalysts are active, selective, and stable for oxidative cyanation of various alcohols to give the corresponding nitriles with molecular oxygen and ammonia as the reactants. The very low amount of Ru (0.1 wt %) with atomic dispersion boosts the catalytic performance of manganese oxides. Experimental and theoretical results show how the Ru sites enhance the ammonia resistance of the catalyst, bolstering its performance in alcohol dehydrogenation and oxygen activation, the key steps in the oxidative cyanation. This investigation demonstrates the high efficiency of a single-site Ru catalyst for nitrile production.
- Gates, Bruce C.,Guan, Erjia,Meng, Xiangju,Wang, Chengtao,Wang, Hai,Wang, Liang,Wang, Sai,Xiao, Feng-Shou,Xu, Dongyang,Xu, Hua,Yang, Bo,Zhang, Jian
-
p. 6299 - 6308
(2020/07/21)
-
- Copper-catalyzed and additive free decarboxylative trifluoromethylation of aromatic and heteroaromatic iodides
-
A copper-catalyzed decarboxylative trifluoromethylation of (hetero)aromatic iodides has been developed. Importantly, this new copper-catalyzed reaction operates in the absence of any ligands and metal additives. The protocol shows good functional group tolerance and is compatible with heteroaromatic systems. The reaction proved scalable to a 15 mmol scale with increased yield. Finally, late-stage installation of the trifluoromethyl functionality afforded the N-trifluoroacetamide variant of the antidepressant agent, Prozac, demonstrating the applicability of the developed method.
- Johansen, Martin B.,Lindhardt, Anders T.
-
p. 1417 - 1425
(2020/03/03)
-
- Efficient dehydration of primary amides to nitriles catalyzed by phosphorus-chalcogen chelated iron hydrides
-
A series of phosphorus-chalcogen chelated hydrido iron (II) complexes 1–7, (o-(R'2P)-p-R-C6H4Y)FeH (PMe3)3 (1: R = H, R' = Ph, Y = O; 2: R = Me, R' = Ph, Y = O; 3: R = H, R' = iPr, Y = O; 4: R = Me, R' = iPr, Y = O; 5: R = H, R' = Ph, Y = S; 6: R = Me, R' = Ph, Y = S; 7: R = H, R' = Ph, Y = Se), were synthesized. The catalytic performances of 1–7 for dehydration of amides to nitriles were explored by comparing three factors: (1) different chalcogen coordination atoms Y; (2) R' group of the phosphine moiety; (3) R substituent group at the phenyl ring. It is confirmed that 5 with S as coordination atom has the best catalytic activity and 7 with Se as coordination atom has the poorest catalytic activity among complexes 1, 5 and 7. Electron-rich complex 4 is the best catalyst among the seven complexes and the dehydration reaction was completed by using 2 mol% catalyst loading at 60 °C with 24 hr in the presence of (EtO)3SiH in THF. Catalyst 4 has good tolerance to many functional groups. Among the seven iron complexes, new complexes 3 and 4 were obtained via the O-H bond activation of the preligands o-iPr2P(C6H4)OH and o-iPr2P-p-Me-(C6H4)OH by Fe(PMe3)4. Both 3 and 4 were characterized by spectroscopic methods and X-ray diffraction analysis. The catalytic mechanism was experimentally studied and also proposed.
- Li, Kai,Sun, Hongjian,Yang, Wenjing,Wang, Yajie,Xie, Shangqing,Li, Xiaoyan,Fuhr, Olaf,Fenske, Dieter
-
-
- Catalytic trifluoromethylation of iodoarenes by use of 2-trifluoromethylated benzimidazoline as trifluoromethylating reagent
-
The trifluoromethylation of iodoarenes was accomplished by use of a 2-trifluoromethylbenzimidazoline derivative as the trifluoromethylating reagent and a catalytic amount of Cu(I) in the presence of 2,2'-bipyridyl as the ligand. Through a mechanistic study, we found that the oxidative addition of the iodoarene to the Cu(I)–CF3 species is the rate-determining step.
- Akiyama, Takahiko,Ishikawa, Taisuke,Kamiyama, Nanami,Uchikura, Tatsuhiro
-
supporting information
p. 2442 - 2447
(2020/11/07)
-
- Ionic-Liquid Controlled Nitration of Double Bond: Highly Selective Synthesis of Nitrostyrenes and Benzonitriles
-
Unprecedented in literature, the conversion of aryl alkenes into β-nitrostyrenes (2) or benzonitriles (3) with sodium nitrite can be governed by an appropriate choice of ionic liquid (IL) medium. A general trend was found for the selectivity of these processes, which depends on the nature of IL, with imidazolium-based ILs, such as [Bmim]Cl, that favor the C–H nitration leading to β-nitrostyrenes, while tetraalkylammonium-based ILs, such as TBAA, privilege the C=C bond cleavage affording benzonitriles. Besides a substrate scope, mechanistic hypotheses were provided on the origin of the different selectivity in the two kinds of ILs, based on their own tunable properties such as polarity, viscosity, and solvent cage effects.
- Casiello, Michele,Caputo, Daniela,Fusco, Caterina,Cotugno, Pietro,Rizzi, Vito,Dell'Anna, Maria Michela,D'Accolti, Lucia,Nacci, Angelo
-
supporting information
p. 6012 - 6018
(2020/08/24)
-
- Synthesis, characterization, catalytic and biological application of half-sandwich ruthenium complexes bearing hemilabile (κ2-: C, S)-thioether-functionalised NHC ligands
-
A series of cationic Ru(ii)(η6-p-cymene) complexes with thioether-functionalised N-heterocyclic carbene ligands have been prepared and fully characterized. Steric and electronic influence of the R thioether substituent on the coordination of the sulfur atom was investigated. The molecular structure of three of them has been determined by means of X-ray diffractrometry and confirmed the bidentate (κ2-C,S) coordination mode of the ligand. Interestingly, only a single diastereomer, as an enantiomeric couple, was observed in the solid state for complexes 1c, 1i and 1j. DFT calculations established a low energy inversion barrier between the two diastereomers through a sulfur pyramidal inversion pathway with R donating group while a dissociative/associative mechanism is more likely with R substituents that contain electron withdrawing group, thus suggesting that the only species observed by the 1H-NMR correspond to an average resonance position of a fluxional mixtures of isomers. All these complexes were found to catalyse the oxydant-free double dehydrogenation of primary amine into nitrile. Ru complex bearing NHC-functionalised S-tBu group was further investigated in a wide range of amines and was found more selective for alkyl amine substrates than for benzylamine derivatives. Finally, preliminary results of the biological effects on various human cancer cells of four selected Ru complexes are reported.
- Achard, Thierry,Bellemin-Laponnaz, Stéphane,Chen, Weiguang,Egly, Julien,Maisse-Francois, Aline,Poblador-Bahamonde, Amalia I.
-
supporting information
p. 3243 - 3252
(2020/03/19)
-
- Dehydrogenation of Primary Alkyl Azides to Nitriles Catalyzed by Pincer Iridium/Ruthenium Complexes
-
Pincer metal complexes exhibit superior catalytic activity in the dehydrogenation of plain alkanes, but find limited application in the dehydrogenation of functionalized organic molecules. Starting from easily accessible primary alkyl azides, here we report an efficient dehydrogenation of azides to nitriles using pincer iridium or ruthenium complexes as the catalysts. This method offers a route to cyanide-free preparation of nitriles without carbon chain elongation and without the use of strong oxidants. Both benzyl and linear aliphatic azides can be dehydrogenated with tert-butylethylene as the hydrogen acceptor to afford nitriles in moderate to high yields. Various functional groups can be tolerated, and the H?C?C?H bond dehydrogenation does not occur for linear alkyl azide substrates. Furthermore, the pincer Ir catalytic system was found to catalyze the direct azide dehydrogenation without the use of a sacrificial hydrogen acceptor.
- Gan, Lan,Jia, Xiangqing,Fang, Huaquan,Liu, Guixia,Huang, Zheng
-
p. 3661 - 3665
(2020/06/02)
-
- Selectivity-tunable amine aerobic oxidation catalysed by metal-free N,O-doped carbons
-
Herein, we present a series of N,O-doped mesoporous carbons obtained at different pyrolysis temperatures as the first metal-free catalysts which successfully switch between imine and nitrile products for amine oxidation. Systematic characterization studies and control experiments revealed that the C-O group on the surface could function as a catalytically active site for nitrile synthesis and the N-doping environment was essential.
- Li, Yingguang,Shang, Sensen,Wang, Lianyue,Lv, Ying,Niu, Jingyang,Gao, Shuang
-
supporting information
p. 12251 - 12254
(2019/10/21)
-
- Immobilized palladium nanoparticles on a cyclodextrin-polyurethane nanosponge (Pd-CD-PU-NS): An efficient catalyst for cyanation reaction in aqueous media
-
Immobilized palladium nanoparticles on a cyclodextrin-polyurethane nanosponge (Pd-CD-PU-NS) were found to be an efficient heterogeneous catalyst in the cyanation reaction of aryl halides in aqueous media. This catalyst system is containing palladium nanoparticles with a size of ~7 nm. Moreover, the CD-PU-NS support formed microsphere-shaped structures with a size of ~100–200 nm. The TEM images show that Pd nanoparticles were formed in near spherical shape morphology and were immobilized in the structure of the CD-PU-NS support. Under our optimized reaction conditions, aryl cyanides were obtained in high yields in the presence of the Pd-CD-PU-NS catalyst. Our results demonstrated that the Pd-CD-PU-NS catalyst is highly effective in the cyanation reaction in aqueous media. Furthermore, the catalyst could be simply extracted from the reaction mixture, providing an efficient methodology for the synthesis of aryl cyanides. The Pd-CD-PU-NS catalyst could be recycled four times with almost consistent catalytic efficiency.
- Khajeh Dangolani, Soheila,Sharifat, Sara,Panahi, Farhad,Khalafi-Nezhad, Ali
-
supporting information
p. 256 - 265
(2019/06/07)
-
- Nickel-Catalyzed Decarbonylative Cyanation of Acyl Chlorides
-
Ni-catalyzed decarbonylative cyanation of acyl chlorides with trimethylsilyl cyanide has been achieved. This transformation is applicable to the synthesis of an array of nitrile compounds bearing a wide range of functional groups under neutral conditions. The step-by-step experimental studies revealed that the reaction sequences of the present catalytic reaction are oxidative addition, transmetalation, decarbonylation, and reductive elimination.
- Wang, Zhenhua,Wang, Xiu,Ura, Yasuyuki,Nishihara, Yasushi
-
supporting information
p. 6779 - 6784
(2019/08/26)
-
- A Transition-Metal-Free One-Pot Cascade Process for Transformation of Primary Alcohols (RCH2OH) to Nitriles (RCN) Mediated by SO2F2
-
A new transition-metal-free one-pot cascade process for the direct conversion of alcohols to nitriles was developed without introducing an “additional carbon atom”. This protocol allows transformations of readily available, inexpensive, and abundant alcohols to highly valuable nitriles.
- Jiang, Ying,Sun, Bing,Fang, Wan-Yin,Qin, Hua-Li
-
p. 3190 - 3194
(2019/05/21)
-
- SO 2 F 2 -Promoted Dehydration of Aldoximes: A Rapid and Simple Access to Nitriles
-
A rapid, simple and mild process for the dehydration of aldoximes to give the corresponding nitriles, which utilizes SO 2 F 2 as an efficient reagent, has been developed. A variety of (hetero)arene, alkene, alkyne and aliphatic aldoximes proceeded with high efficiency to afford nitriles in excellent to quantitative yields with great functional group compatibilities in acetonitrile under ambient conditions. Furthermore, an eco-friendly synthetic protocol to access nitriles from aldehydes with ortho -, meta - and para -nitrile groups was also described in aqueous methanol by using inorganic base Na 2 CO 3, and a one-pot synthetic strategy to generate nitriles from aldehydes was proved to be feasible.
- Ding, Chengrong,Mei, Guangyao,Wang, Haibo,Zhang, Guofu,Zhao, Yiyong
-
supporting information
p. 1484 - 1488
(2019/07/15)
-
- Continuous-flow synthesis of nitriles from aldehydes via Schmidt reaction
-
A continuous-flow synthesis of nitriles by Schmidt reaction has been developed. Using this procedure, a variety of aldehydes could be smoothly transformed into the desired nitriles in good to excellent yields. The mild reaction conditions and the flowing reaction system greatly improved the safety and make the reaction easy to scale up.
- Zhan, Wei,Tong, Meng,Ji, Ling,Zhang, Han,Ge, Zemei,Wang, Xin,Li, Runtao
-
p. 973 - 976
(2019/01/29)
-
- Visible light-induced direct conversion of aldehydes into nitriles in aqueous medium using Co@g-C3N4 as photocatalyst
-
Unprecedented Co@g-C3N4 catalyzed visible light driven efficient conversion of a variety of aldehydes into corresponding nitriles is reported. Operational simplicity, excellent yield of pure products (87–94%), ambient reaction condition, using aqueous methanol as solvent, visible-light photocatalysis are the salient features of envisaged methodology for direct conversion of aldehydes into nitriles. Furthermore, reusability of Co@g-C3N4 was checked up to five runs and it was noticed that there was no substantial change in morphology as well as the catalytic efficiency of catalyst.
- Verma, Fooleswar,Shukla, Prashant,Bhardiya, Smita R.,Singh, Manorama,Rai, Ankita,Rai, Vijai K.
-
-
- Transition-metal-free addition reaction for the synthesis of 3-(aminobenzylidene/aminoalkylidene)indolin-2-ones and its synthetic applications
-
A novel and efficient transition-metal-free approach for the exclusive synthesis of Z-3-(aminobenzylidene/aminoalkylidene)indolin-2-ones in high yield from 2-oxindole and aryl/alkyl nitrile in the presence of LiOtBu and 2,2′-bipyridine system is described. In addition, we disclosed a new approach towards the metal-free fluorination using selectfluor and the C=C bond cleavage using CuI and environmentally benign O2.
- Bisht, Girish Singh,Gnanaprakasam, Boopathy
-
supporting information
p. 13516 - 13527
(2019/10/19)
-
- Transformation of aromatic bromides into aromatic nitriles with n-BuLi, pivalonitrile, and iodine under metal cyanide-free conditions
-
Various aromatic nitriles could be obtained in good yields by the treatment of aryl bromides with n-butyllithium and then pivalonitrile, followed by the treatment with molecular iodine at 70 °C, without metal cyanides under transition-metal-free conditions. The present reaction proceeds through the radical β-elimination of imino-nitrogen-centered radicals formed from the reactions of imines and N-iodoimines under warming conditions.
- Uchida, Ko,Togo, Hideo
-
-
- Method for preparing nitrile
-
The invention provides a method for preparing nitrile. Aldoxime carboxylic ester is used as a reactant to prepare a nitrile compound. The aldoxime carboxylic ester can be completely converted into corresponding nitrile under common catalysis of ferric salt and phenol within a few minutes. The method for preparing the nitrile has the advantages of gentle reaction conditions, simple and easy-to-getused reagents, cheap and environment-friendly catalyst, wide substrate application range, simple operation, rapid reaction and the like.
- -
-
Paragraph 0015
(2019/06/13)
-
- Iron and Phenol Co-Catalysis for Rapid Synthesis of Nitriles under Mild Conditions
-
A mild, scalable, high yielding, and rapid route to access diverse nitriles from aldehyde oxime esters enabled by iron(III) and phenol co-catalysis has been developed. The reaction was performed at room temperature to give nitriles in excellent yield within minutes. Mechanistic studies show that the reaction may proceed through a radical process in which benzoyl aldehyde oxime is not only a substrate, but also an ancillary ligand to support iron salt in the promotion of the transformation.
- Meng, Hong,Gao, Sen,Luo, Meiming,Zeng, Xiaoming
-
p. 4617 - 4623
(2019/07/15)
-
- Pd(II)-immobilized on a nanoporous triazine-based covalent imine framework for facile cyanation of haloarenes with K4Fe(CN)6
-
A porous covalent organic framework incorporated with both imine and triazine functionalities (TPA-TCIF) was synthesized by Schiff-base condensation of 2,4,6-tris(4-aminophenyl)triazine and tris(4-formylphenyl)amine under the solvothermal condition of a 1-butanol:1,2-dichlorobenzene mixture. The resulting TPA-TCIF was a highly ordered crystalline network with surface area of 2938 m2 g?1, which was among the highest reported imine-based porous covalent organic frameworks. TPA-TCIF was also stable in water and other organic solvents. Pd(II) was immobilized into TPA-TCIF network and the resultant Pd/TPA-TCIF was tested as a catalyst for the additive-free cyanation of haloarenes with non-toxic K4[Fe(CN)6]. The catalyst showed excellent catalytic activity, and both electron-donating / -withdrawing groups attached to the para- and meta-positions of bromoarenes produced the respective nitriles with good to excellent yields. The catalyst could be reused up to five times without noticeable loss of activity or catalyst poisoning by cyanide ions during the reaction.
- Puthiaraj, Pillaiyar,Yu, Kwangsun,Shim, Sang Eun,Ahn, Wha-Seung
-
-
- Ni-Mediated Generation of "cN" Unit from Formamide and Its Catalysis in the Cyanation Reactions
-
The in situ generation of a "cyano" unit from readily available organic precursors is of high interest in synthetic chemistry. Herein, we report the first example of Ni-mediated dehydration of formamide to form "CN" and its subsequent catalytic applications in the hydrocyanation of alkynes and cyanation of aryl halides. Formamide can serve as a convenient source for the nitrile unit, in that it releases water as the only byproduct.
- Yang, Luo,Liu, Yu-Ting,Park, Yoonsu,Park, Sung-Woo,Chang, Sukbok
-
p. 3360 - 3365
(2019/03/26)
-
- Palladium-Catalyzed Late-Stage Direct Arene Cyanation
-
Methods for direct benzonitrile synthesis are sparse, despite the versatility of cyano groups in organic synthesis and the importance of benzonitriles for the dye, agrochemical, and pharmaceutical industries. We report the first general late-stage aryl C–H cyanation with broad substrate scope and functional-group tolerance. The reaction is enabled by a dual-ligand combination of quinoxaline and an amino acid-derived ligand. The method is applicable to direct cyanation of several marketed small-molecule drugs, common pharmacophores, and organic dyes. Benzonitriles are some of the most versatile building blocks for organic synthesis, in particular in the pharmaceutical industry, but general methods to make them by direct C–H functionalization are unknown. In this issue of Chem, Ritter and coworkers describe a late-stage aryl C–H cyanation with broad substrate scope and functional-group tolerance, enabled by a palladium-dual-ligand catalyst system. The reaction may serve for the late-stage modification of drug candidates. Aryl nitriles constitute an important class of organic compounds that are widely found in natural products, pharmaceuticals, agricultural chemicals, dyes, and materials. Moreover, nitriles are versatile building blocks to access numerous other important molecular structure groups. However, no general method for direct aromatic C–H cyanation is known. All approaches to date require either an appropriate directing group or reactive electron-rich substrates, such as indoles, which limit their synthetic applications. Here we describe an undirected, palladium-catalyzed late-stage aryl C–H cyanation reaction for the synthesis of complex aryl nitriles that would otherwise be more challenging to produce. The wide substrate scope and good functional-group tolerance of this reaction provide direct and quick access to structural diversity for pharmaceutical and agrochemical development.
- Zhao, Da,Xu, Peng,Ritter, Tobias
-
supporting information
p. 97 - 107
(2019/01/21)
-
- Ligand-free trifluoromethylation of iodoarenes by use of 2-Aryl-2-trifluoromethylbenzimidazoline as new trifluoromethylating reagent
-
N-Methyl 2-aryl-2-trifluoromethylbenzimidazolines were synthesized and utilized in the trifluoromethylation reaction of iodoarenes in the presence of copper(I) salt and base. Iodoarenes bearing electron-donating and electron-withdrawing groups were tolerant to this reaction in the absence of a ligand and gave trifluorotoluene derivatives in good to high yields.
- Miyagawa, Masamichi,Ishikawa, Taisuke,Shinkai, Kota,Akiyama, Takahiko
-
-
- Preparation method of 4-trifluoromethyl benzonitrile
-
The invention discloses a preparation method of 4-trifluoromethyl benzonitrile, and belongs to the technical field of chemical synthesis. In order to improve the yield of the 4-trifluoromethyl benzonitrile and decrease the production cost of the 4-trifluoromethyl benzonitrile, The invention provides the preparation method of the 4-trifluoromethyl benzonitrile. The preparation method comprises thefollowing steps of using 4-trifluoromethyl chlorobenzene as a raw material and potassium ferrocyanide as a cyaniding agent, and in the presence of palladium acetate and 4,5-bis(diphenylphosphino)-9,9-dimethyl xanthene, reacting to prepare the 4-trifluoromethyl benzonitrile. According to the method provided by the invention, the 4,5-bis(diphenylphosphino)-9,9-dimethyl xanthene which is low-cost andeasily obtained is used as a ligand; the consumption of a catalyst is small; through the optimization of a reaction condition, the yield of the 4-trifluoromethyl benzonitrile can reach 90% or above;the 4-trifluoromethyl benzonitrile is more easily used on an industrial level and further has economical efficiency; and the realization of the industrialized production of the 4-trifluoromethyl benzonitrile is facilitated.
- -
-
Paragraph 0045-0069
(2019/02/21)
-
- Easy Ruthenium-Catalysed Oxidation of Primary Amines to Nitriles under Oxidant-Free Conditions
-
A dehydrogenation of primary amine to give the corresponding nitrile under oxidant- and base-free conditions catalysed by simple [Ru(p-cym)Cl2]2 with no extra ligand is reported. The system is highly selective for alkyl amines, whereas benzylamine derivatives gave the nitrile product together with the imine in a ratio ranging from 14:1 to 4:1 depending on the substrate. Preliminary mechanistic investigations have been performed to identify the key factors that govern the selectivity.
- Achard, Thierry,Egly, Julien,Sigrist, Michel,Maisse-Fran?ois, Aline,Bellemin-Laponnaz, Stéphane
-
supporting information
p. 13271 - 13274
(2019/10/21)
-