- Manganese-catalyzed homogeneous hydrogenation of ketones and conjugate reduction of α,β-unsaturated carboxylic acid derivatives: A chemoselective, robust, and phosphine-free in situ-protocol
-
We communicate a user-friendly and glove-box-free catalytic protocol for the manganese-catalyzed hydrogenation of ketones and conjugated C[dbnd]C[sbnd]bonds of esters and nitriles. The respective catalyst is readily assembled in situ from the privileged [Mn(CO)5Br] precursor and cheap 2-picolylamine. The catalytic transformations were performed in the presence of t-BuOK whereby the corresponding hydrogenation products were obtained in good to excellent yields. The described system offers a brisk and atom-efficient access to both secondary alcohols and saturated esters avoiding the use of oxygen-sensitive and expensive phosphine-based ligands.
- Topf, Christoph,Vielhaber, Thomas
-
-
- Dynamic Kinetic Resolution of Alcohols by Enantioselective Silylation Enabled by Two Orthogonal Transition-Metal Catalysts
-
A nonenzymatic dynamic kinetic resolution of acyclic and cyclic benzylic alcohols is reported. The approach merges rapid transition-metal-catalyzed alcohol racemization and enantioselective Cu-H-catalyzed dehydrogenative Si-O coupling of alcohols and hydrosilanes. The catalytic processes are orthogonal, and the racemization catalyst does not promote any background reactions such as the racemization of the silyl ether and its unselective formation. Often-used ruthenium half-sandwich complexes are not suitable but a bifunctional ruthenium pincer complex perfectly fulfills this purpose. By this, enantioselective silylation of racemic alcohol mixtures is achieved in high yields and with good levels of enantioselection.
- Oestreich, Martin,Seliger, Jan
-
supporting information
p. 247 - 251
(2020/10/29)
-
- Selective C-alkylation Between Alcohols Catalyzed by N-Heterocyclic Carbene Molybdenum
-
The first implementation of a molybdenum complex with an easily accessible bis-N-heterocyclic carbene ligand to catalyze β-alkylation of secondary alcohols via borrowing-hydrogen (BH) strategy using alcohols as alkylating agents is reported. Remarkably high activity, excellent selectivity, and broad substrate scope compatibility with advantages of catalyst usage low to 0.5 mol%, a catalytic amount of NaOH as the base, and H2O as the by-product are demonstrated in this green and step-economical protocol. Mechanistic studies indicate a plausible outer-sphere mechanism in which the alcohol dehydrogenation is the rate-determining step.
- Liu, Jiahao,Li, Weikang,Li, Yinwu,Liu, Yan,Ke, Zhuofeng
-
supporting information
p. 3124 - 3128
(2021/09/20)
-
- Synthesis and structural elucidation of (pyridyl)imine Fe(II) complexes and their applications as catalysts in transfer hydrogenation of ketones
-
Reactions of (pyridyl)imine ligands: 2,6-diisopropyl-N-[(pyridine-2-yl)methylene]aniline (L1), 2,6-diisopropyl-N-[(pyridine-2-yl)ethylidene]aniline (L2), 2,6-dimethyl-N-[(pyridine-2-yl)methylene]aniline (L3), 2,6-dimethyl-N-[(pyridine-2-yl)ethylidene]aniline (L4) and N-[(pyridine-2-yl)methylene]aniline (L5) with FeCl2 salt afforded the corresponding paramagnetic Fe(II) complexes [Fe(L1)2Cl][FeCl4] (Fe1), [Fe(L2)2Cl][FeCl4] (Fe2), [Fe(L3)2Cl][FeCl4] (Fe3), [Fe(L4)2Cl][FeCl4], (Fe4), [Fe(L5)2Cl2] (Fe5) in good yields. On the other hand, reactions of L1 with FeCl2 in the presence of NaPF6 afforded complex [Fe(L1)2Cl][PF6] (Fe6) in moderate yields. Molecular structures of complexes Fe1 and Fe2 reveal the formation of cationic species containing two N^N bidentate ligands and one chlorido co-ligand to give five-coordinate geometry with [FeCl4]? as counter-anion. On the other hand, complex Fe5, is an octahedral neutral species containing two bidentate L5 and two chlorido ligands. All the complexes (Fe1–Fe6) formed active catalysts in the transfer hydrogenation of ketones affording average yields of about 85%. The ligand architecture, reaction conditions and nature of substrate influenced the catalytic activities of the complexes. Mercury and subs-stoichiometric poisoning tests pointed to the existence of both Fe(0) nanoparticles and homogeneous Fe(II) species as the active intermediates.
- Tsaulwayo, Nokwanda,Kumah, Robert T.,Ojwach, Stephen O.
-
-
- Achiral and chiral NNN-pincer nickel complexes with oxazolinyl backbones: application in transfer hydrogenation of ketones
-
We describe the synthesis of new NNN-oxazolinyl-pincer nickel complexes and their application in the transfer hydrogenation of ketones. Achiral NNN-ligands, R′2-oxazolinyl-2-C6H4-NH-C(O)CH2NEt2[(
- Jagtap, Rahul A.,Ankade, Shidheshwar B.,Gonnade, Rajesh G.,Punji, Benudhar
-
p. 11927 - 11936
(2021/07/17)
-
- The catalytic activity of new iridium(I) N-heterocyclic carbene complexes for hydrogen transfer reaction of ketones
-
In this paper, the reaction of [Ir(COD)Cl]2 with in situ prepared Ag–N-heterocyclic carbene (NHC) complexes yields a series of [IrCl(COD)(NHC)] complexes. All compounds were fully characterized by 1H NMR, 13C NMR, and FT–IR spectroscopy. The manuscript focused on the preparation of new Ir–NHC complexes, characterization and catalytic behavior. A series of hydrogenation transfer reactions were performed to reveal the effects of the Ir–NHC complexes. The new Ir–NHC complexes of benzimidazole-2-ylidene are effective catalysts for the transfer of hydrogenation of different ketones, using i-PrOH as the source of hydrogen in the presence of KOH. The reactions were conducted at a substrate/catalyst/base (S/C/base) molar ratio of 1:0.001:2. Although all of the complexes are active catalysts for the transfer hydrogenation of ketones, moderate yields were obtained with acetylnaphthalene and conversion was not observed with very substituted ketones such as 2′,3′,4′,5′,6′-pentamethylacetophenone. It was observed that for transfer hydrogenation reactions Ir–NHC catalysts were more active, compared to Ru–NHC catalyzed studies performed by our team. Graphic abstract: [Figure not available: see fulltext.].
- Karaca, Emine ?zge
-
p. 287 - 293
(2021/02/09)
-
- Applications of imino-pyridine Ni(II) complexes as catalysts in the transfer hydrogenation of ketones
-
Five imino-pyridine Ni(II) complexes: [{Ni(L1)Cl2}2] Ni1; [{Ni(L2)Cl2}2] Ni2; [{Ni(L3)Cl2}2] Ni3; [{Ni(L4)Cl2}2] Ni4 and [Ni(L5)2Cl2] Ni5 derived from ligands 2,6-diisopropyl-N-[(pyridin-2-yl) methylene] aniline (L1); 2,6-diisopropyl-N-[(pyridin-2-yl) ethylidene]aniline (L2); 2,6-dimethyl-N-[(pyridin-2-yl) methylene] aniline (L3); 2,6-dimethyl-N-[(pyridin-2-yl) ethylidene] aniline (L4) and N-[(pyridin-2-yl) methylene] aniline (L5) were evaluated as catalysts in the transfer hydrogenation of ketones. The Ni(II) complexes demonstrated moderate catalytic activities giving a turnover number (TON) of up to 126 at catalyst loading of 0.5 mol%. The structure of the complexes and nature of ketone substrate influenced the catalytic activities of the complexes. Deactivation studies using mercury and sub-stoichiometric poisoning experiments pointed to the presence of both Ni(0) nanoparticles and Ni(II) homogeneous as the active species.
- Tsaulwayo, Nokwanda,Kumah, Robert.T.,Ojwach, Stephen.O.
-
-
- Pincerlike molybdenum complex and preparation method thereof, catalytic composition and application thereof, and alcohol preparation method
-
The invention discloses a clamp-type molybdenum complex, a preparation method, a corresponding catalyst composition and application. The method comprises the steps: obtaining 9 molybdenum complexes with different structures through coordination reaction of 2-(substituent ethyl)-(5, 6, 7, 8-tetrahydroquinolyl) amine and a corresponding carbonyl molybdenum metal precursor; and catalyzing a ketone compound transfer hydrogenation reaction through a molybdenum complex to generate 40 alcohol compounds. The preparation method of the molybdenum complex is simple, high in yield and good in stability. For a transfer hydrogenation reaction of ketone, the molybdenum-based catalytic system has high catalytic activity and small molybdenum loading capacity, is used for production of aromatic and aliphatic alcohols, and has the advantages of simple method, small environmental pollution and high yield.
- -
-
Paragraph 0125-0130
(2021/08/11)
-
- Nickel-Mediated Enantiospecific Silylation via Benzylic C-OMe Bond Cleavage
-
Benzylic stereocenters are found in bioactive and drug molecules, as enantiopure benzylic alcohols have been used to build such a stereogenic center, but are limited to the construction of a C-C bond. Silylation of alkyl alcohols has the potential to build bioactive molecules and building blocks; however, the development of such a process is challenging and unknown. Herein, we describe an unprecedented AgF-assisted nickel catalysis in the enantiospecific silylation of benzylic ethers.
- Balakrishnan, Venkadesh,Murugesan, Vetrivelan,Chindan, Bincy,Rasappan, Ramesh
-
supporting information
p. 1333 - 1338
(2021/02/20)
-
- Catalytic Aldehyde and Alcohol Arylation Reactions Facilitated by a 1,5-Diaza-3,7-diphosphacyclooctane Ligand
-
We report a catalytic method to access secondary alcohols by the coupling of aryl iodides. Either aldehydes or alcohols can be used as reaction partners, making the transformation reductive or redox-neutral, respectively. The reaction is mediated by a Ni catalyst and a 1,5-diaza-3,7-diphosphacyclooctane. This P2N2ligand, which has previously been unrecognized in cross-coupling and related reactions, was found to avoid deleterious aryl halide reduction pathways that dominate with more traditional phosphines and NHCs. An interrupted carbonyl-Heck type mechanism is proposed to be operative, with a key 1,2-insertion step forging the new C-C bond and forming a nickel alkoxide that may be turned over by an alcohol reductant. The same catalyst was also found to enable synthesis of ketone products from either aldehydes or alcohols, demonstrating control over the oxidation state of both the starting materials and products.
- Isbrandt, Eric S.,Nasim, Amrah,Newman, Stephen G.,Zhao, Karen
-
supporting information
p. 14646 - 14656
(2021/09/18)
-
- Pd-catalyzed allylative dearomatisation using Grignard reagents
-
Pd-catalyzed allylative dearomatisation of naphthyl halides is shown to be feasible by employing Grignard reagents. The high reactivity of the nucleophile allows for fast reactions and low catalyst loading, while a plethora of successfully substituted compounds illustrate the broad scope. Five membered heteroaromatic compounds are also demonstrated to be reactive under similar conditions.
- Boldrini, Cosimo,Harutyunyan, Syuzanna R.
-
supporting information
p. 11807 - 11810
(2021/11/30)
-
- Fe-Catalyzed Anaerobic Mukaiyama-Type Hydration of Alkenes using Nitroarenes
-
Hydration of alkenes using first row transition metals (Fe, Co, Mn) under oxygen atmosphere (Mukaiyama-type hydration) is highly practical for alkene functionalization in complex synthesis. Different hydration protocols have been developed, however, control of the stereoselectivity remains a challenge. Herein, highly diastereoselective Fe-catalyzed anaerobic Markovnikov-selective hydration of alkenes using nitroarenes as oxygenation reagents is reported. The nitro moiety is not well explored in radical chemistry and nitroarenes are known to suppress free radical processes. Our findings show the potential of cheap nitroarenes as oxygen donors in radical transformations. Secondary and tertiary alcohols were prepared with excellent Markovnikov-selectivity. The method features large functional group tolerance and is also applicable for late-stage chemical functionalization. The anaerobic protocol outperforms existing hydration methodology in terms of reaction efficiency and selectivity.
- Bhunia, Anup,Bergander, Klaus,Daniliuc, Constantin Gabriel,Studer, Armido
-
supporting information
p. 8313 - 8320
(2021/03/08)
-
- N-Heterocyclic Carbene (NHC)-Stabilized Ru0 Nanoparticles: In Situ Generation of an Efficient Transfer Hydrogenation Catalyst
-
Tethered and untethered ruthenium half-sandwich complexes were synthesized and characterized spectroscopically. X-ray crystallographic analysis of three untethered and two tethered Ru N-heterocyclic carbene (NHC) complexes were also carried out. These RuNHC complexes catalyze transfer hydrogenation of aromatic ketones in 2-propanol under reflux, optimally in the presence of (25 mol %) KOH. Under these conditions, the formation of 2–3 nm-sized Ru0 nanoparticles was detected by TEM measurements. A solid-state NMR investigation of the nanoparticles suggested that the NHC ligands were bound to the surface of the Ru nanoparticles (NPs). This base-promoted route to NHC-stabilized ruthenium nanoparticles directly from arene-tethered ruthenium–NHC complexes and from untethered ruthenium–NHC complexes is more convenient than previously known routes to NHC-stabilized Ru nanocatalysts. Similar catalytically active RuNPs were also generated from the reaction of a mixture of [RuCl2(p-cymene)]2 and the NHC precursor with KOH in isopropanol under reflux. The transfer hydrogenation catalyzed by these NHC-stabilized RuNPs possess a high turnover number. The catalytic efficiency was significantly reduced if nanoparticles were exposed to air or allowed to aggregate and precipitate by cooling the reaction mixtures during the reaction.
- Kathuria, Lakshay,Din Reshi, Noor U.,Samuelson, Ashoka G.
-
supporting information
p. 7622 - 7630
(2020/05/29)
-
- Group 6 Metal Carbonyl Complexes Supported by a Bidentate PN Ligand: Syntheses, Characterization, and Catalytic Hydrogenation Activity
-
We report on the preparation of a series of phosphorus-nitrogen donor ligand complexes [M(CO)4(PN)], where M = Cr, Mo, W and PN is 2-(diphenylphosphino)ethylamine. The organometallic compounds were readily obtained upon reacting the respective metal hexacarbonyls with equimolar amounts of the pertinent ligand in the presence of tetraethylammonium bromide. The PN-ligated metal carbonyls were fully characterized by standard spectroscopic techniques and X-ray crystallography. The ability of the title compounds to function as homogeneous hydrogenation catalysts was probed in the reduction of acetophenone and benzaldehyde derivatives to yield the corresponding alcohols. The reaction setup was easily assembled by simply combining the components in the autoclave on the bench outside an inert-gas-operated glovebox system.
- Faust, Kirill,Topf, Christoph,Vielhaber, Thomas
-
p. 4535 - 4543
(2020/12/23)
-
- Efficient Transfer Hydrogenation of Ketones using Methanol as Liquid Organic Hydrogen Carrier
-
Herein, we demonstrate an efficient protocol for transfer hydrogenation of ketones using methanol as practical and useful liquid organic hydrogen carrier (LOHC) under Ir(III) catalysis. Various ketones, including electron-rich/electron-poor aromatic ketones, heteroaromatic and aliphatic ketones, have been efficiently reduced into their corresponding alcohols. Chemoselective reduction of ketones was established in the presence of various other reducible functional groups under mild conditions.
- Garg, Nidhi,Paira, Soumen,Sundararaju, Basker
-
p. 3472 - 3476
(2020/05/29)
-
- Zinc Hydride-Catalyzed Hydrofuntionalization of Ketones
-
Three new dimeric bis-guanidinate zinc(II) alkyl, halide, and hydride complexes [LZnEt]2 (1), [LZnI]2 (2) and [LZnH]2 (3) were prepared. Compound 3 was successfully employed for the hydrosilylation and hydroboration of a vast number of ketones. The catalytic performance of 3 in the hydroboration of acetophenone exhibits a turnover frequency, reaching up to 5800 h-1, outperforming that of reported zinc hydride catalysts. Notably, both intra- and intermolecular chemoselective hydrosilylation and hydroboration reactions have been investigated.
- Sahoo, Rajata Kumar,Mahato, Mamata,Jana, Achintya,Nembenna, Sharanappa
-
p. 11200 - 11210
(2020/10/12)
-
- Aerobic Oxidative Cleavage and Esterification of C(OH)–C Bonds
-
C(OH)–C bonds are widely distributed in naturally renewable biomass, such as carbohydrates, lignin, and their platform molecules. Selective cleavage and functionalization of C(OH)–C bonds is an attractive strategy in terms of producing value-added chemicals from biomass. However, effective transformation of alcohols into esters by activation of C(OH)–C bonds has not been achieved so far. Herein, for the first time, we report selective cleavage and esterification of C(OH)–C bonds, catalyzed by inexpensive copper salts, using environmentally benign oxygen as the oxidant, to afford methyl esters in excellent yields. A diverse range of phenylethanol derivatives that contain C(OH)–C bonds were effectively converted into methyl benzoates. Detailed analysis revealed that the high efficiency and selectivity resulted mainly from the fact that, in addition to the major esterification reaction, the side products (e.g., olefins and acids) were also transformed in situ into esters in the reaction system. C(OH)–C bonds are widely distributed in naturally renewable biomass. In the context of developing future biorefineries, selective cleavage and functionalization of C(OH)–C bonds are crucial and represent an attractive strategy in terms of producing value-added chemical compounds from biomass resources. In the current manuscript, we report, for the first time, an effective and selective method for the cleavage and esterification of C(OH)–C bonds of alcohols to produce esters, by using environmentally benign O2 as the terminal oxidant and inexpensive commercially available copper salts as catalysts. Furthermore, a detailed mechanistic study revealed that, in addition to the major esterification route, side products (e.g., olefins and acids), which are inevitably generated under oxidative and basic conditions, were also simultaneously converted into esters, thus significantly improving the final yields of target ester products. Native lignin represents the only naturally sustainable aromatic resource. Transformation of native lignin into valuable aromatics would make a great contribution to our planet. We report, for the first time, the effective transformation of alcohols into esters by esterification of C(OH)–C bonds, which offers a new way for the simultaneous degradation and functionalization of lignin. This reaction promotes new explorations for biomass valorization.
- Liu, Mingyang,Zhang, Zhanrong,Yan, Jiang,Liu, Shuaishuai,Liu, Huizhen,Liu, Zhaotie,Wang, Weitao,He, Zhenhong,Han, Buxing
-
supporting information
p. 3288 - 3296
(2020/10/20)
-
- Asymmetric Deoxygenative Cyanation of Benzyl Alcohols Enabled by Synergistic Photoredox and Copper Catalysis?
-
Summary of main observation and conclusion. An enantioselective deoxygenative cyanation of benzyl alcohols was accomplished for the first time through the synergistic photoredox and copper catalysis. This reaction features the use of organic photosensitizer and low-cost 3d metal catalyst, simple and safe operations, and extremely mild conditions. A variety of chiral benzyl nitriles were produced in generally good yields and high level of enantiocontrols from readily available feedstocks (22 examples, up to 93% yield and 92% ee).
- Chen, Hong-Wei,Lu, Fu-Dong,Cheng, Ying,Jia, Yue,Lu, Liang-Qiu,Xiao, Wen-Jing
-
supporting information
p. 1671 - 1675
(2020/11/03)
-
- Bottleable NiCl2(dppe) as a catalyst for the Markovnikov-selective hydroboration of styrenes with bis(pinacolato)diboron
-
Although transition-metal-catalysed hydroboration reactions of alkenes have been extensively studied, only three examples using Ni complexes have been reported so far. In this study, we have examined hydroboration reactions of alkenes using Ni/phosphine complexes. The commercially available and bottleable complex NiCl2(dppe) (dppe = 1,2-bis(diphenylphosphino)ethane) serves as a catalyst for the highly Markovnikov-selective hydroboration of styrene derivatives that affords the desired Markovnikov products in high yield.
- Hashimoto, Toru,Ishimaru, Toshiya,Shiota, Keisuke,Yamaguchi, Yoshitaka
-
supporting information
p. 11701 - 11704
(2020/10/20)
-
- Design of Manganese Phenol Pi-complexes as Shvo-type Catalysts for Transfer Hydrogenation of Ketones
-
Catalytic hydrogenation is one of the most important reactions both in academic research and industry. We explored ability of the manganese pi-complexes to act as Shvo-type catalysts for transfer hydrogenation of ketones. DFT calculations suggested that the transfer of hydrogen atoms from the hypothetical intermediate [(C6Me3H2OH)Mn(CO)2H] to acetone has low activation barrier of 10.9 kcal mol?1. Experimentally a number of ketones with various functional groups (OMe, NH2, Cl, CF3, pyridyl) were successfully reduced in isopropanol at 90 °C in the presence of the complex [(C6Me3H2OH)Mn(CO)3]BF4 (1 mol %) and tBuOK (75 mol %). However, further investigation revealed that the reduction was mainly promoted by base rather than the manganese complex.
- Shvydkiy, Nikita V.,Vyhivskyi, Oleksandr,Nelyubina, Yulia V.,Perekalin, Dmitry S.
-
p. 1602 - 1605
(2019/03/07)
-
- A Practical and Stereoselective In Situ NHC-Cobalt Catalytic System for Hydrogenation of Ketones and Aldehydes
-
Homogeneous catalytic hydrogenation of carbonyl groups is a synthetically useful and widely applied organic transformation. Sustainable chemistry goals require replacing conventional noble transition metal catalysts for hydrogenation by earth-abundant base metals. Herein, we report how a practical in situ catalytic system generated by easily available pincer NHC precursors, CoCl2, and a base enabled efficient and high-yielding hydrogenation of a broad range of ketones and aldehydes (over 50 examples and a maximum turnover number [TON] of 2,610). This is the first example of NHC-Co-catalyzed hydrogenation of C=O bonds using flexible pincer NHC ligands consisting of a N-H substructure. Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized by fine-tuning of the steric bulk of pincer NHC ligands. Additionally, a bis(NHCs)-Co complex was successfully isolated and fully characterized, and it exhibits excellent catalytic activity that equals that of the in-situ-formed catalytic system. Catalytic hydrogenation is a powerful tool for the reduction of organic compounds in both fine and bulk chemical industries. To improve sustainability, more ecofriendly, inexpensive, and earth-abundant base metals should be employed to replace the precious metals that currently dominate the development of hydrogenation catalysts. However, the majority of the base-metal catalysts that have been reported involve expensive, complex, and often air- and moisture-sensitive phosphine ligands, impeding their widespread application. From a mixture of the stable CoCl2, imidazole salts, and a base, our newly developed catalytic system that formed easily in situ enables efficient and stereoselective hydrogenation of C=O bonds. We anticipate that this easily accessible catalytic system will create opportunities for the design of practical base-metal hydrogenation catalysts. A practical in situ catalytic system generated by a mixture of easily available pincer NHC precursors, CoCl2, and a base enabled highly efficient hydrogenation of a broad range of ketones and aldehydes (over 50 examples and up to a turnover number [TON] of 2,610). Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized in high selectivities. Moreover, the preparation of a well-defined bis(NHCs)-Co complex via this pincer NHC ligand consisting of a N-H substructure was successful, and it exhibits equally excellent catalytic activity for the hydrogenation of C=O bonds.
- Zhong, Rui,Wei, Zeyuan,Zhang, Wei,Liu, Shun,Liu, Qiang
-
supporting information
p. 1552 - 1566
(2019/06/14)
-
- Synthesis of a rhodium(III) triphenylphosphine complex via C–S bond cleavage of an azo-thioether ligand: X-ray structure, electrochemistry and catalysis towards transfer hydrogenation of ketones
-
A new rhodium(III) triphenylphosphine complex having the general formula [Rh(PPh3)2(L)Cl] (1) was synthesized by C–S bond cleavage of an ONS donor azo-thioether ligand (L-CH2Ph). The complex was thoroughly characterized by various spectroscopic techniques. Its single crystal X-ray structure exhibits an octahedral geometry around the rhodium(III) center. A cyclic voltammogram of the complex exhibits ligand based quasi-irreversible oxidative and reductive responses. The electronic structure, redox properties and electronic excitations in the complex were interpreted by DFT and TDDFT calculations. The complex effectively catalyzed the transfer hydrogenation reaction of ketones with high yields in i-PrOH in the presence of a base.
- Roy, Puspendu,Manna, Chandan Kumar,Naskar, Rahul,Mondal, Tapan Kumar
-
p. 208 - 214
(2018/11/24)
-
- Oxidative β-Halogenation of Alcohols: A Concise and Diastereoselective Approach to Halohydrins
-
β-Halohydrins bearing transformable halo- and hydroxyl groups, are easily converted into various valuable blocks in organic and pharmaceutical synthesis. A diastereoselective β-halogenation of benzylic alcohols was achieved under simple and low-cost conditions, which provided a direct synthesis of β-halohydrins. The simple reaction conditions, easily available reagents, high diastereoselectivities, and additional oxidant-free make this reaction very attractive and practical.
- Ai, Lingsheng,Wang, Weijin,Wei, Jialiang,Li, Qing,Song, Song,Jiao, Ning
-
supporting information
p. 437 - 441
(2019/02/26)
-
- Design, Synthesis, and Application of NNN Pincer Ligands Possessing a Remote Hydroxyl Group for Ruthenium-Catalyzed Transfer Hydrogenation of Ketones
-
A new family of pyridyl-based NNN pincer ligands bearing a remote pendent OH group were developed. Considerable acceleration effects on the activity of Ru-catalyzed transfer hydrogenation of ketones were imparted by the pendent OH group, and importantly, introducing a CH2OH group to the 4′-position of the pyrazolyl moiety is an appropriate choice. The results present a general strategy for exploring bifunctional ligands to construct effective catalysts.
- Cao, Zhengqiang,Qiao, Hong,Zeng, Fanlong
-
p. 797 - 804
(2019/03/04)
-
- Stepwise degradation of hydroxyl compounds to aldehydes: Via successive C-C bond cleavage
-
Stepwise degradation of hydroxyl compounds to aldehydes via successive cleavage of C-C bonds was achieved by using a bimetallic catalytic system (PdCl2 + CuCl) without any ligands and additives. The broad applicability is expanded to a diverse range of aromatic, aliphatic, primary and secondary alcohols, as well as lignin model compounds.
- Liu, Mingyang,Zhang, Zhanrong,Shen, Xiaojun,Liu, Huizhen,Zhang, Pei,Chen, Bingfeng,Han, Buxing
-
supporting information
p. 925 - 928
(2019/01/24)
-
- Highly dispersed Ni nanoparticles on mesoporous silica nanospheres by melt infiltration for transfer hydrogenation of aryl ketones
-
Nickel-based catalysts have been applied to the catalytic reactions for transfer hydrogenation of carbonyl compounds. In the present work, highly dispersed nickel particles located at the pores of mesoporous silica spheres (Ni@mSiO2) were prepared via an optimized melt infiltration route. The nickel nanoparticles of 10 wt% in the Ni@mSiO2 catalyst could be uniformly loaded with high dispersion of 36.3%, resulting excellent performance for catalytic transfer hydrogenation of aryl ketones.
- Kweon, Hyemin,Jang, Sanha,Bereketova, Akerke,Chan Park, Ji,Park, Kang Hyun
-
p. 14154 - 14159
(2019/05/21)
-
- Synthesis of thiolato bridged dimeric rhodium(III) triphenylphosphine complex via C–S bond cleavage: X-ray structure, DFT computation and catalytic evaluation towards transfer hydrogenation of ketones
-
Herein, we have synthesized a new dimeric rhodium(III) triphenylphospine complex, [Rh2(PPh3)2(L)2Cl2] (1) via sp3(C)–S bond cleavage of a thioether containing ligand, 1-(((2-(ethylthio)phenyl)diazenyl)methyl)naphthalen-2-ol (L-CH2CH3). The complex was thoroughly characterized by using various spectroscopic techniques. Dimeric structure with distorted octahedral geometry of each of the rhodium center is confirmed by single crystal X-ray diffraction method. Catalytic efficiency of the complex towards transfer hydrogenation of ketones is studied in i-PrOH. Electronic structure and UV–vis spectrum of the complex are interpreted by DFT and TDDFT computations.
- Roy, Puspendu,Naskar, Rahul,Manna, Chandan Kumar,Mondal, Tapan Kumar
-
-
- Half-sandwich Ru (II) complexes containing (N, O) Schiff base ligands: Catalysts for base-free transfer hydrogenation of ketones
-
Two new half-sandwich Ru (II)(p-cymene) complexes (1 and 2) containing dopamine-based (N, O) Schiff base ligands (L1H and L2H) were synthesized and characterized by FT-IR, UV–Visible and 1H & 13C NMR spectral techniques, and elemental analyses. The spectroscopic and analytical data revealed monobasic bidentate coordination of the ligands with Ru ion. The molecular structures of L1H, L2H and 2 were further confirmed by single crystal X-ray diffraction study. Complexes 1 and 2?have been employed as catalysts in the transfer hydrogenation of ketones using 2-propanol as a hydrogen source at 85?°C under base-free condition. Good to the excellent yield of secondary alcohols, gram scale synthesis, and high TON and TOF made this catalytic system interesting.
- Satheesh,Sathish Kumar, Pushpanathan N.,Kumara, P. Raghavendra,Karvembu, Ramasamy,Hosamani, Amar,Nethaji
-
-
- Hydrosilylation of carbonyl and carboxyl groups catalysed by Mn(i) complexes bearing triazole ligands
-
Manganese(i) complexes bearing triazole ligands are reported as catalysts for the hydrosilylation of carbonyl and carboxyl compounds. The desired reaction proceeds readily at 80 °C within 3 hours at catalyst loadings as low as 0.25 to 1 mol%. Hence, good to excellent yields of alcohols could be obtained for a wide range of substrates including ketones, esters, and carboxylic acids illustrating the versatility of the metal/ligand combination.
- Martínez-Ferraté, Oriol,Chatterjee, Basujit,Werlé, Christophe,Leitner, Walter
-
p. 6370 - 6378
(2019/11/20)
-
- Nitrogen Dioxide Catalyzed Aerobic Oxidative Cleavage of C(OH)–C Bonds of Secondary Alcohols to Produce Acids
-
Stable organic nitroxyl radicals are an important class of catalysts for oxidation reactions, but their wide applications are hindered by their steric hinderance, high cost, complex operation, and separation procedures. Herein, NO2 in DMSO is shown to effectively catalyze the aerobic oxidative cleavage of C(OH)?C bonds to form a carboxylic group, and NO2 was generated in situ by decomposition of nitrates. A diverse range of secondary alcohols were selectively converted into acids in excellent yields in this transition-metal-free system without any additives. Preliminary results also indicate its applicability to depolymerize recalcitrant macromolecular lignin. Detail studies revealed that NO2 from nitrates promoted the reaction, and NO2 served as hydrogen acceptor and radical initiator for the tandem oxidative reaction.
- Liu, Mingyang,Zhang, Zhanrong,Song, Jinliang,Liu, Shuaishuai,Liu, Huizhen,Han, Buxing
-
supporting information
p. 17393 - 17398
(2019/11/11)
-
- Synthesis and chiroptical properties of organometallic complexes of helicenic N-heterocyclic carbenes
-
Novel [4, 6]helicenes (4a,b) bearing a fused imidazolium unit have been prepared from [4, 6]helicene-2,3-di-n-propyl-amines 3a,b. The in situ formation of N-heterocyclic carbene (NHC) derivatives followed by their complexation to iridium(I) or rhodium(I) gave access to complexes 1a, 1′a, and 1b, containing mono-coordinated helicene-NHC, chloro and COD (COD = 1,5-cyclooctadiene) ligands. Ir and Rh complexes 1a and 1′a were characterized by X-ray crystallography. HPLC and NMR analyses showed that Ir(I) complex 1b existed as a mixture of two diastereomeric complexes corresponding to enantiomeric pairs M-(?)/P-(+)-1b1 and M-(?)/P-(+)-1b2 which differ by the position of COD through space. The chiroptical properties (electronic circular dichroism and optical rotation) of the four stereoisomers were measured. These complexes were also tested as catalysts in a transfer hydrogenation reaction.
- Hafedh, Nesrine,Favereau, Ludovic,Caytan, Elsa,Roisnel, Thierry,Jean, Marion,Vanthuyne, Nicolas,Aloui, Faouzi,Crassous, Jeanne
-
p. 1005 - 1013
(2019/11/14)
-
- Practical (asymmetric) transfer hydrogenation of ketones catalyzed by manganese with (chiral) diamines ligands
-
The reduction of ketones with 2-propanol as reductant was achieved using an in-situ generated catalytic system based on manganese pentacarbonyl bromide, as metal precursor, and ethylenediamine as ligand. The reaction proceeds in high yield at 80 °C, in 3 h, with 0.5 mol% of catalyst. In the presence of chiral (1R,2R)-N,N′-dimethyl-1,2-diphenylethane-1,2-diamine, as the ligand, sterically hindered alcohols were produced with enantiomeric excess up to 90%.
- Wang, Ding,Bruneau-Voisine, Antoine,Sortais, Jean-Baptiste
-
-
- Stereogenic Lock in 1-Naphthylethanamine Complexes for Catalyst and Auxiliary Design: Structural and Reactivity Analysis for Cycloiridated Pseudotetrahedral Complexes
-
A series of optically active pseudo-tetrahedral five-membered cyclometalated 1-naphthylethanamine iridium(III) complexes were prepared and characterized to analyze the efficacy of the stereogenic conformational lock in both solid and solution phases. The synthesis of the iridacycles was diastereoselective, and the compounds were found to be conformationally rigid. In comparison to its phenyl derivative, the structural lock prevented oxidation of the amine moiety within the five-membered organometallic ring during its synthesis. With up to three stereogenic centers in one of the naphthalene complexes, the stereochemistry of the metallacycle remained stable to both thermal and chemical changes. In terms of catalytic performance, the complexes displayed excellent activity for the asymmetric hydrogen transfer reaction, albeit with modest enantioselectivities.
- Chen, Houguang Jeremy,Hong Xiang Teo, Ronald,Li, Yongxin,Pullarkat, Sumod A.,Leung, Pak-Hing
-
supporting information
p. 99 - 106
(2018/01/17)
-
- Enantioselective metal-free reduction of ketones by a user-friendly silane with a reusable chiral additive
-
1-Hydrosilatrane, a safe and easy-to-handle reducing reagent that can be inexpensively accessed, has been shown to reduce prochiral ketones asymmetrically in the presence of chiral 1,2-aminoalcohols with ees ranging from 8% to 86%. The best result was achieved using ephedrine as the source of chirality, which is readily commercially available. The additive can be recovered through extraction and reused without any erosion of enantioselectivity.
- Varjosaari, Sami E.,Skrypai, Vladislav,Herlugson, Sharon M.,Gilbert, Thomas M.,Adler, Marc J.
-
supporting information
p. 2839 - 2843
(2018/06/25)
-
- Heterogenization of cobalt nanoparticles on hollow carbon capsules: Lab-in-capsule for catalytic transfer hydrogenation of carbonyl compounds
-
Incorporation of cobalt nanoparticles (Co NPs) in porous iron oxide nanospheres (Fe3O4 NSs) templated, glucose derived hollow carbon capsules (HCCs), with an objective to achieve activity and stability simultaneously, facilitates higher catalytic activity of Co NPs in transfer hydrogenation of ketones and aldehydes. A variety of ketones and aldehydes are hydrogenated successfully with excellent yields and high turnover number (TON). This system constitutes one of the most general, heterogeneous, highly stable catalyst, which does not require additives for activation and employs mild reaction conditions. Other significant advantages are low Co content (0.38 mol%) for a catalytic hydrogenation reaction, functional-group tolerance, inexpensive, environmentally benign nature and reusability.
- Kumar, Basuvaraj Suresh,Amali, Arlin Jose,Pitchumani, Kasi
-
p. 153 - 161
(2018/03/01)
-
- Chiral C2-symmetric η6-p-cymene-Ru(II)-phosphinite complexes: Synthesis and catalytic activity in asymmetric reduction of aromatic, methyl alkyl and alkyl/aryl ketones
-
Chiral C2-symmetric bis(phosphinite) ligands and their binuclear ruthenium(II) complexes have been synthesized and used as catalysts in the ruthenium-catalyzed asymmetric transfer hydrogenation of aromatic, methyl alkyl and alkyl/aryl ketones using 2-propanol as both the hydrogen source and solvent in the presence of KOH. Under optimized conditions, all complexes showed high catalytic activity as catalysts in the reduction of various ketones to corresponding chiral secondary alcohols. Products were obtained with high conversions (99%) and moderate to good enantioselectivities (82% ee). Furthermore, C2-symmetric bis(phosphinite) ligands and their binuclear ruthenium(II) complexes were characterized by multinuclear NMR spectroscopy, FT-IR spectroscopy, LC/MS-MS and elemental analysis.
- Karaka?, Duygu Elma,Aydemir, Murat,Durap, Feyyaz,Baysal, Ak?n
-
p. 430 - 439
(2017/12/06)
-
- Catechol-type ligand containing new modular design dioxaborinane compounds: Use in the transfer hydrogenation of various ketones
-
A novel class of tricoordinate dioxaborinane compounds, which have the general formula [B1(L1–5)] and [B2(L1–5)], were designed and synthesized by the corresponding catechol-type ligands (L1–L5) at ambient temperature. All the new compounds were fully characterized by NMR (1H, 13C, and 11B), FT-IR, UV–vis, LC-MS spectroscopy, and melting point analysis and microanalysis. The dioxaborinane [B1(L1–5)] and [B2(L1–5)] compounds were investigated as catalyst for the transfer hydrogenation of various ketones under suitable conditions. Particularly, it was proved that the ferrocene-based dioxaborinane [B1(L1–5)] molecules can afford an efficient catalytic conversion compared to corresponding 3,5-bis(trifluoromethyl)phenyl-based [B2(L1–5)] dioxaborinanes in transfer hydrogenation catalytic studies.
- Kilic, Ahmet,Kaya, ?brahim Halil,Ozaslan, Ismail,Aydemir, Murat,Durap, Feyyaz
-
-
- A mechanistic study of transfer hydrogenation catalyzed by cyclometallated ruthenium half-sandwich complexes
-
Transfer hydrogenation of aromatic ketones catalyzed by eight cyclometallated ruthenium half-sandwich complexes, including three new complexes, was examined. The catalytic process was studied using different ratios of substrate to base and base to catalyst and using a deuterated reductant. Optimum conditions for catalysis were shown to be in the presence of higher amounts of base in refluxing isopropanol. Under these conditions, the complexes were reduced in situ to give Ru(0) nanoparticles invisible to the naked eye. The nanoparticles were characterized by TEM, DLS and XPS. The catalytic transfer hydrogenation, under conditions in which nanoparticles were generated, was found to be far greater than the transfer hydrogenation by the molecular catalyst. Complete characterization of the three new complexes, including the X-ray crystallographic characterization of these complexes was carried out.
- Din Reshi, Noor U.,Senthurpandi, Dineshchakravarthy,Samuelson, Ashoka G.
-
p. 189 - 199
(2018/05/04)
-
- An air and moisture tolerant iminotrihydroquinoline-ruthenium(ii) catalyst for the transfer hydrogenation of ketones
-
Reaction of 8-amino-5,6,7,8-tetrahydroquinoline with RuCl2(PPh3)3 at room temperature affords the ruthenium(ii) chelate (8-NH2-C9H10N)RuCl2(PPh3)2 (E), in which the two triphenylphosphine ligands are disposed mutually cis. By contrast, when the reaction is performed at reflux ligand oxidation/dehydrogenation occurs along with cis-trans reorganization of the triphenylphosphines to form the 8-imino-5,6,7-trihydroquinoline-ruthenium(ii) complex, (8-NH-C9H9N)RuCl2(PPh3)2 (F). Complex F can also be obtained in higher yield by heating a solution of E alone to reflux. Comparison of their molecular structures highlights the superior binding properties of the bidentate imine ligand in F over its amine-containing counterpart in E. Both complexes are highly effective in the transfer hydrogenation of a wide range of alkyl-, aryl- and cycloalkyl-containing ketones affording their corresponding secondary alcohols with loadings of as low as 0.1 mol%. Significantly, F can deliver excellent conversions even in bench quality 2-propanol in reaction vessels open to the air, whereas the catalytic efficiency of E is diminished by the presence of air but only operates efficiently under inert conditions.
- Li, Jiaoyan,Ma, Yingmiao,Wang, Zheng,Liu, Qingbin,Solan, Gregory A.,Ma, Yanping,Sun, Wen-Hua
-
p. 8738 - 8745
(2018/07/13)
-
- Homogeneous Palladium-Catalyzed Transfer Hydrogenolysis of Benzylic Alcohols Using Formic Acid as Reductant
-
We report the first homogeneous palladium-based transfer hydrogenolysis of benzylic alcohols using an in situ formed palladium-phosphine complex and formic acid as reducing agent. The reaction requires a catalyst loading as low as only 1 mol % of palladium and just a slight excess of reductant to obtain the deoxygenated alkylarenes in good to excellent yields. Besides demonstrating the broad applicability for primary, secondary and tertiary benzylic alcohols, a reaction intermediate could be identified. Additionally, it could be shown that partial oxidation of the applied phosphine ligand was beneficial for the course of the reaction, presumably by stabilizing the active catalyst. Reaction profiles and catalyst poisoning experiments were used to characterize the catalyst, the results of which indicate a homogeneous metal complex as the active species.
- Ciszek, Benjamin,Fleischer, Ivana
-
supporting information
p. 12259 - 12263
(2018/08/28)
-
- FLP-Catalyzed Transfer Hydrogenation of Silyl Enol Ethers
-
Herein we report the first catalytic transfer hydrogenation of silyl enol ethers. This metal free approach employs tris(pentafluorophenyl)borane and 2,2,6,6-tetramethylpiperidine (TMP) as a commercially available FLP catalyst system and naturally occurring γ-terpinene as a dihydrogen surrogate. A variety of silyl enol ethers undergo efficient hydrogenation, with the reduced products isolated in excellent yields (29 examples, 82 % average yield).
- Khan, Imtiaz,Reed-Berendt, Benjamin G.,Melen, Rebecca L.,Morrill, Louis C.
-
p. 12356 - 12359
(2018/09/18)
-
- Aminotriazole Mn(I) Complexes as Effective Catalysts for Transfer Hydrogenation of Ketones
-
A catalytic system based on complexes comprising abundant and cheap manganese together with readily available aminotriazole ligands is reported. The new Mn(I) complexes are catalytically competent in transfer hydrogenation of ketones with 2-propanol as hydrogen source. The reaction proceeds under mild conditions at 80 °C for 20 h with 3 % of catalyst loading using either KOtBu or NaOH as base. Good to excellent yields were obtained for a wide substrate scope with broad functional group tolerance. The obtained results by varying the substitution pattern of the ligand are consistent with an out-sphere mechanism for the H-transfer.
- Martínez-Ferraté, Oriol,Werlé, Christophe,Franciò, Giancarlo,Leitner, Walter
-
p. 4514 - 4518
(2018/10/20)
-
- Novel peripherally and non-peripherally hydrobenzoin substituted optically active phthalocyanines: Synthesis, characterization, aggregation, electrochemical properties and catalytic applications
-
The novel optically active two zinc(II)phthalocyanines and two cobalt(II)phthalocyanines with four chiral hydrobenzoin moieties at the non-peripheral (4 and 5) and peripheral positions (6 and 7) of the phthalocyanine ring have been synthesized. The structures of the synthesized compounds are characterized by 1H NMR, IR, UV–Vis, circular dichroism (CD) and MALDI-TOF MS spectral data. The comparative studies of the spectral, aggregation properties, voltammetry and catalytic applications of novel zinc(II) and cobalt(II)phthalocyanines, tetra-substituted with hydrobenzoin at peripheral and non-peripheral positions, were investigated. All synthesized phthalocyanines are highly soluble in most common organic solvents. In the enantioselective addition of diethylzinc to aldehydes, the best catalytic activity was obtained with 3-methoxybenzaldehyde in the presence of non-peripherally hydrobenzoin substituted zinc(II)phthalocyanine 4 and afforded the corresponding chiral secondary alcohol with the yield of 38% and the enantiomeric excess of 33%. In the oxidation of benzyl alcohol, the highest conversion of benzyl alcohol to benzaldehyde was obtained with non-peripherally substituted cobalt(II)phthalocyanine 5 as 91% with the highest selectivity of 83%.
- G?k, Ya?ar,G?k, Halil Zeki,Y?lmaz, Mustafa Kemal,Farsak, Murat,Karayi?it, ?lker ümit
-
p. 128 - 138
(2018/07/29)
-
- New Rh(III) complexes of 5-methyl-5-(pyridyl)-2,4-imidazolidenedione: Synthesis, X-ray structure, electrochemical study and catalytic behaviour for hydrogenation of ketones
-
We describe the reaction of anion [RhCl6]3? with a series of hydantoin ligands (HL1, HL2 and HL3?=?5-methyl-5-(2-, 3- and 4-pyridyl)-2,4-imidazolidenedione, respectively). Based on spectroscopic, cyclic voltammetric, elemental and MS
- Sabounchei, Seyyed Javad,Sayadi, Mohsen,Hashemi, Mojdeh Sadat,Hashemi, Ali,Nematollahi, Davood,Salahifar, Eslam,Gable, Robert W.
-
-
- Synthesis and characterization of a ruthenium complex with bis(diphenylphosphino)propane and thioether containing ONS donor ligand: Application in transfer hydrogenation of ketones
-
The synthesis and characterization of a mixed ligand Ru(II) complex, [Ru(dppp)(L)Cl] (1) (where, dppp?=?bis(diphenylphosphino) propane) is reported. The distorted octahedral geometry of the complex is confirmed by X-ray diffraction method. Cyclic voltammogram in CH3CN exhibits Ru(II)/Ru(III) quasireversible oxidation couple along with reversible azo-bond reductions peaks with reference to Ag/AgCl electrode. The efficiency of the complex towards the transfer hydrogenation of ketones in i-PrOH is examined and an excellent catalytic conversion (90–98%) is observed. The electronic structure and redox properties are well corroborated with the DFT calculations.
- Biswas, Sujan,Sarkar, Deblina,Roy, Puspendu,Mondal, Tapan Kumar
-
-
- Osmium-hydride-carbonyl complex with thioether containing Schiff base ligand: Synthesis, crystal structure, electrochemistry and catalytic transfer hydrogenation
-
A new osmium(II) carbonyl complex, [Os(H)(CO)(PPh3)2(L)] (1) with thioether containg NNS donor ligand (where L = 2-(ethylthio)-N-((pyridine-2-yl)methylene))benzenamine) is synthesized and characterized by various spectroscopic techniques. The distorted octahedral environment around osmium in the complex is confirmed by single crystal X-ray structure. Cyclic voltammogram in acetonitrile exhibits Os(II)/Os(III) oxidation and ligand based reduction. The complex effectively catalyzed the transfer hydrogenation reaction of ketones in high yields in i-PrOH. The electronic structure and redox properties are interpreted by DFT studies.
- Biswas, Sujan,Roy, Puspendu,Jana, Subrata,Mondal, Tapan Kumar
-
p. 201 - 207
(2017/06/30)
-
- Hydroxyl group effect in novel NNN type pyridine based ruthenium (II) complex for the transfer hydrogenation of ketones
-
The new NNN type pyridine ligands were prepared by using low cost and readily available starting materials and metalated with RuCl2(PPh3)3 to obtain ruthenium(II) complexes. All structures were illuminated by NMR, HRMS, and FT-IR spectroscopy. The complexes exhibited good catalytic activity in transfer hydrogen reaction of ketones and it was found that a hydroxyl group on β-position of the pyridine ring had a dramatic effect on the catalyst efficiency.
- Sahin, Irfan,Emir, Sedat,Ispir, Esin,Karakaya, Idris,Gumus, Selcuk,Ulusoy, Mahmut,Karabuga, Semistan
-
-
- A pH-Responsive Soluble-Polymer-Based Homogeneous Ruthenium Catalyst for Highly Efficient Asymmetric Transfer Hydrogenation (ATH)
-
A pH-responsive polymer has been synthesized successfully by means of copolymerization of dimethyl aminopropyl acrylamide (DMAPA) and N-p-styrenesulfonyl-1,2-diphenylethylenediamine (V-TsDPEN). The pH-responsive polymer coordination ruthenium complex was thus prepared and employed as an efficient catalyst for the asymmetric transfer hydrogenation (ATH) of various ketones. The polymer catalyst exhibited an attractive pH-induced phase-separable behavior in water: it could be dissolved in water when the pH of the solution was lower than 6.5 at the beginning of the reaction, but was precipitated completely from water when the pH of the solution was above 8.5 after reaction. Additionally, the catalysts were highly efficient for the ATH of a wide range of substrates that bore different functional groups and could be recycled easily from the aqueous solution by means of self-separation. They could be recycled eight times without significant changes in catalytic activity and enantioselectivity.
- Xie, Yinzheng,Wang, Mengpan,Wu, Xiaohui,Chen, Chen,Ma, Wenbo,Dong, Qifeng,Yuan, Mingming,Hou, Zhenshan
-
p. 541 - 549
(2016/07/06)
-
- Nickel Nanoparticles Supported on CMK-3 with Enhanced Catalytic Performance for Hydrogenation of Carbonyl Compounds
-
Ordered mesoporous carbon materials are becoming increasingly important in catalysis applications due to their advantageous stability and surface properties. In this paper, we report a replication of the synthesis of mesoporous carbon CMK-3 using SBA-15 as a silica template. Ni/CMK-3 was prepared by incorporating Ni particles formed inside the pores of CMK-3 by impregnation of nickel nitrate and subsequent hydrogen reduction. The prepared Ni/CMK-3 has a large surface area and a very small nickel nanoparticle size (1 nm) with the aim of achieving high performance in catalytic hydrogenation reactions. Moreover, we demonstrate that CMK-3 has a higher stability than that of SBA-15 during the hydrogenation reactions of acetophenone derivatives.
- Kim, Daeho,Kang, Hyuntae,Park, Hyesu,Park, Sungkyun,Park, Ji Chan,Park, Kang Hyun
-
p. 3469 - 3473
(2016/07/29)
-
- Aluminum Monohydride Catalyzed Selective Hydroboration of Carbonyl Compounds
-
The well-defined aluminum monohydride compound [{(2,4,6-Me3-C6H2)NC(Me)}2(Me)(H)]AlH·(NMe2Et) (1) catalyzes hydroboration of a wide range of aldehydes and ketones under mild reaction conditions. Moreover, compound 1 displayed chemoselective hydroboration of aldehydes over ketones at rt.
- Jakhar, Vineet Kumar,Barman, Milan Kr.,Nembenna, Sharanappa
-
p. 4710 - 4713
(2016/09/28)
-