- The Discovery of Citral-Like Thiophenes in Fried Chicken
-
The isomers of 3,7-dimethyl-2,6-octadienal, more commonly known together as citral, are two of the most notable natural compounds in the flavor and fragrance industry. However, both isomers are inherently unstable, limiting their potential use in various applications. To identify molecules in nature that can impart the fresh lemon character of citral while demonstrating stability under acidic and thermal conditions has been a major challenge and goal for the flavor and fragrance industry. In the study of fried chicken, several alkyl thiophenecarbaldehydes were identified by gas chromatography-mass spectrometry and gas chromatography-olfactometry that provided a similar citral-like aroma. The potential mechanism of formation in fried chicken is discussed. Furthermore, in order to explore the organoleptic properties of this structural backbone, a total of 35 thiophenecarbaldehyde derivatives were synthesized or purchased for evaluation by odor and taste. Certain organoleptic trends were observed as the length of the alkyl or alkenyl chain increased or when the chain was moved to different positions on the thiophene backbone. The 3-substituted alkyl thiophenecarbaldehydes, specifically 3-butyl-2-thiophenecarbaldehyde and 3-(3-methylbut-2-en-1-yl)-2-thiophenecarbaldehyde, exhibited strong citrus and citral-like notes. Several alkyl thiophenecarbaldehydes were tested in high acid stability trials (4 °C vs 38 °C) and outperformed citral both in terms of maintaining freshness over time and minimizing off-notes. Additional measurements were completed to calculate the odor thresholds for a select group of thiophenecarbaldehydes, which were found to be between 4.7-215.0 ng/L in air.
- Cannon, Robert J.,Curto, Nicole L.,Esposito, Cynthia M.,Payne, Richard K.,Janczuk, Adam J.,Agyemang, David O.,Cai, Tingwei,Tang, Xiao-Qing,Chen, Michael Z.
-
p. 5690 - 5699
(2017/07/24)
-
- Cobalt-Catalyzed Reductive Alkylation of Heteroaryl Bromides: One-Pot Access to Alkylthiophenes, -furans, -selenophenes, and -pyrroles
-
A practical and convenient Co-catalyzed alkylation method for the facile introduction of various alkyl chains into organic electronically significant heteroaryl compounds, including thiophenes, furans, selenophenes, and pyrroles, is reported. Under well-optimized reaction conditions, a wide range of alkylated heteroaryl compounds have beeen efficiently prepared in moderate to good isolated yields. Notably, 2- or 3-alkylthiophenes, which play a decisive role in polymer chemistry and organic materials, have been synthesized step-economically for the first time by this reductive-coupling methodology using inexpensive cobalt salts as catalysts. This straightforward synthetic procedure avoids the preparation of moisture-unstable organometallic reagents (RMgX or RZnX) required in conventional alkylation protocols. Various alkyl chains have been introduced into organic, electronically important heteroaryl compounds step-economically through Co-catalyzed reductive alkylation reactions. The resulting alkylheteroarenes are indispensable building blocks for polymer chemistry and π-functional organic materials.
- Cai, Deng-Jhou,Lin, Po-Han,Liu, Ching-Yuan
-
supporting information
p. 5448 - 5452
(2015/08/24)
-
- Transition between triangular and square tiling patterns in liquid-crystalline honeycombs formed by tetrathiophene-based bolaamphiphiles
-
A series of 5,5′′′-diphenyl tetrathiophenes with polar glycerol groups at each end and two lateral flexible chains self-assemble into a series of liquid-crystalline honeycombs, formed by the π-conjugated rods which enclose polygonal prismatic cells filled by the lateral chains. With increasing chain length a discontinuous transition from triangular to square honeycombs takes place. At this transition a periodic honeycomb composed of a mixture of square and triangular cells in a ratio 1:2 was formed at low temperature, whereas at higher temperature a hexagonal columnar phase composed of triangular and randomly distributed rhombic cells, a new kind of cybotactic nematic phase, and also a cybotactic isotropic phase, both composed of square honeycomb fragments, represent the intermediate states. This provides an example of a dynamic self-assembled system where, depending on the molecular mobility, the transition between two periodic structures with different symmetry either leads to an increase of complexity, or to a chaotic regime with reduced order.
- Cheng, Xiaohong,Gao, Hongfei,Tan, Xiaoping,Yang, Xueyan,Prehm, Marko,Ebert, Helgard,Tschierske, Carsten
-
p. 3317 - 3331
(2013/07/26)
-
- Dithiophene based X-shaped bolaamphiphiles: Liquid crystals with single wall honeycombs and geometric frustration
-
A series of 5,5′-diphenyl-2,2′-dithiophene based X-shaped polyphiles with two long lateral alkyl chains and terminal glycerol groups was synthesized and the liquid crystalline phases formed by these compounds were investigated by polarizing microscopy, DSC and XRD. These compounds form square (p4mm and p4gm) and hexagonal (p6mm) columnar LC phases. In these mesophases the molecules organize into polygonal honeycombs where the π-conjugated cores form the walls, fused at the edges by the hydrogen bonding networks between the glycerol units and filled by the lateral alkyl chains. By elongation of these chains, a series of polygonal honeycomb phases with a "single wall" structure, ranging from triangular via square and pentagonal to hexagonal was observed. Most triangular honeycombs appear to be defective and can be considered as mixtures of triangular cylinders with orientationally randomized rhombic cylinders. The transition from this improper triangular honeycomb to the square honeycomb takes place via a disordered isotropic phase. Addition of water to this isotropic phase gives rise to a true triangular honeycomb LC phase. Replacing one of the long lateral chains by a small methyl group leads to honeycombs formed by double walls instead of single walls. UV investigations indicate π-stacking of the aromatic cores organized in the honeycomb walls, which is of interest for the potential application of these materials in self assembled arrays of organic electronic material. This journal is
- Gao, Hongfei,Ye, Yafei,Kong, Leiyang,Cheng, Xiaohong,Prehm, Marko,Ebert, Helgard,Tschierske, Carsten
-
p. 10921 - 10931,11
(2020/09/15)
-
- Cross-couplings of alkyl halides with heteroaromatic halides, in water at room temperature
-
Zn-mediated, Pd-catalyzed cross-coupling reactions between heteroaromatic and alkyl halides can be done at room temperature in pure water using a commercially available Pd catalyst and PTS, a nanomicelle-forming amphiphile. Notably, zinc metal inserts selectively into a carbon sp3-halide bond, while palladium adds oxidatively to a carbon sp2-bond.
- Krasovskiy, Arkady,Thomé, Isabelle,Graff, Julien,Krasovskaya, Valeria,Konopelski, Paul,Duplais, Christophe,Lipshutz, Bruce H.
-
experimental part
p. 2203 - 2205
(2011/05/05)
-
- Synthetic Applications of 3,4-Bis(trimethylsilyl)thiophene: Unsymmetrically 3,4-Disubstituted Thiophenes and 3.4-Didehydrothiophene
-
3,4-Bis(trimethylsilyl)thiophene (1a) was synthesized by three routes: (a) 1,3-dipolar cycloaddition; (b) modification of 3,4-dibromothiophene; and (c) intermolecular thiazole-alkyne Diels-Alder reaction. 3,4-Bis(trimethylsilyl)thiophene (1a) can function as a versatile building block for the construction of unsymmetrically 3,4-disubstituted thiophenes utilizing its step wise regiospecific mono-ipso-substitution followed by palladium-catalyzed cross-coupling reactions. In this manner, thiophenes 15, 16, 17a-j, 19a,b, 20, 22a-c, 23a,b, 24a-d, 25a-c, and 27a-j were prepared. The thiophene-3,4-diyl dimer 28 and thiophene-3,4-diyl tetramer 29 were also realized by palladium-catalyzed self-coupling reaction of organoboroxines. The stannylthiophene 31, formed by conversion of the C-Si bond to a C-Sn bond via boroxine 26c underwent both carbonylative coupling and lithiation followed by quenching with electrophiles to afford unsymmetrically 3,4-disubstituted thiophenes 33 and 36a-c as well. Moreover, 3,4-bis(trimethylsilyl)thiophene (1a) can be used as the starting material for the generation of the highly strained cyclic cumulene 3,4-didehy-drothiophene (2), whose existence was substantiated by its trapping reaction with several alkenes.
- Ye, Xin-Shan,Wong, Henry N. C.
-
p. 1940 - 1954
(2007/10/03)
-
- Thallium(III) Trifluoroacetate-Trifluoroacetic Acid in the Chemistry of Polythiophenes. 2. Treatment of 3-Alkylthiophenes and Electron Paramagnetic Resonance Results
-
The treatment of thiophene and 3-alkylthiophenes with thallium(III) trifluoroacetate (TTFA) in trifluoroacetic acid (TFA) gives insoluble and dark powdery solids with oxygen content and electrical conductivities ranging from 10-4 to 10-6 Ω-1 cm-1. Polar and short fractions are negligible. All of them show semiconductivity (10-3Ω-1 cm-1) when doped in iodine atmosphere. Electron paramagnetic resonance (EPR) spectra of either as-synthesized or I2-treated solids display characteristic single and broad lines (ΔHPP, 1.84-7.4 G) with Lorentzian shapes and g-values in the range 2.0028-2.0038. Infrared spectra show characteristic C-H out-of-plane deformations (780 cm-1 for polythiophene and 820-825 cm-1 for poly(3-alkylthiophenes)) in addition to a strong peak at 1650-1690 cm-1 which has not been conclusively assigned. EPR spectra of some disubstituted and tetrasubstituted 2,2′-bithiophene radical cations have been observed and their g-values and coupling constants assigned when the corresponding parent compounds are photolyzed with ultraviolet light in TFA. Photolysis of 3-alkylthiophenes in TFA in the EPR instrument gave the radical cations of 4,4′-dialkyl-2,2′-bithiophenes. In no case, were EPR signals of the isomeric 3,3′-dialkyl- or 3,4′-dialkyl-2,2′-bithiophene radical cations observed, indicating that dimerization of 3-alkylthiophenes occurs through the less sterically hindered 5-position. The presence of two doublet species corresponding to both conformers, syn and anti, in the radical cations is associated with a large barrier to rotation about the C(2)-C(2′) bond.
- Tormo, Jordi,Jesus Moreno,Ruiz, Jordi,Fajari, Lluis,Julia, Luis
-
p. 878 - 884
(2007/10/03)
-