- Hf-MOF catalyzed Meerwein?Ponndorf?Verley (MPV) reduction reaction: Insight into reaction mechanism
-
Hf-MOF-808 exhibits excellent activity and specific selectivity on the hydrogenation of carbonyl compounds via a hydrogen transfer strategy. Its superior activity than other Hf-MOFs is attributed to its poor crystallinity, defects and large specific surface area, thereby containing more Lewis acid-base sites which promote this reaction. Density functional theory (DFT) computations are performed to explore the catalytic mechanism. The results indicate that alcohol and ketone fill the defects of Hf-MOF to form a six-membered ring transition state (TS) complex, in which Hf as the center of Lewis stearic acid coordinates with the oxygen of the substrate molecule, thus effectively promoting hydrogen transfer process. Other reactive groups, such as –NO2, C = C, -CN, of inadequate hardness or large steric hindrance are difficult to coordinate with Hf, thus weakening their catalytic effect, which explains the specific selectivity Hf-MOF-808 for reducing the carbonyl group.
- Lin, Yamei,Bu, Qingxia,Xu, Jiaxian,Liu, Xiao,Zhang, Xueping,Lu, Guo-Ping,Zhou, Baojing
-
-
- Iron-catalyzed chemoselective hydride transfer reactions
-
A Diaminocyclopentadienone iron tricarbonyl complex has been applied in chemoselective hydrogen transfer reductions. This bifunctional iron complex demonstrated a broad applicability in mild conditions in various reactions, such as reduction of aldehydes over ketones, reductive alkylation of various functionalized amines with functionalized aldehydes and reduction of α,β-unsaturated ketones into the corresponding saturated ketones. A broad range of functionalized substrates has been isolated in excellent yields with this practical procedure.
- Coufourier, Sébastien,Ndiaye, Daouda,Gaillard, Quentin Gaignard,Bettoni, Léo,Joly, Nicolas,Mbaye, Mbaye Diagne,Poater, Albert,Gaillard, Sylvain,Renaud, Jean-Luc
-
supporting information
(2021/06/07)
-
- Ambient-pressure highly active hydrogenation of ketones and aldehydes catalyzed by a metal-ligand bifunctional iridium catalyst under base-free conditions in water
-
A green, efficient, and high active catalytic system for the hydrogenation of ketones and aldehydes to produce corresponding alcohols under atmospheric-pressure H2 gas and ambient temperature conditions was developed by a water-soluble metal–ligand bifunctional catalyst [Cp*Ir(2,2′-bpyO)(OH)][Na] in water without addition of a base. The catalyst exhibited high activity for the hydrogenation of ketones and aldehydes. Furthermore, it was worth noting that many readily reducible or labile functional groups in the same molecule, such as cyan, nitro, and ester groups, remained unchanged. Interestingly, the unsaturated aldehydes can be also selectively hydrogenated to give corresponding unsaturated alcohols with remaining C=C bond in good yields. In addition, this reaction could be extended to gram levels and has a large potential of wide application in future industrial.
- Wang, Rongzhou,Yue, Yuancheng,Qi, Jipeng,Liu, Shiyuan,Song, Ao,Zhuo, Shuping,Xing, Ling-Bao
-
-
- Method for synthesizing primary alcohol in water phase
-
The invention discloses a method for synthesizing primary alcohol in a water phase. The method comprises the following steps: taking aldehyde as a raw material, selecting water as a solvent, and carrying out catalytic hydrogenation reaction on the aldehyde in the presence of a water-soluble catalyst to obtain the primary alcohol, wherein the catalyst is a metal iridium complex [Cp*Ir(2,2'-bpyO)(OH)][Na]. Water is used as the solvent, so that the use of an organic solvent is avoided, and the method is more environment-friendly; the reaction is carried out at relatively low temperature and normal pressure, and the reaction conditions are mild; alkali is not needed in the reaction, so that generation of byproducts is avoided; and the conversion rate of the raw materials is high, and the yield of the obtained product is high. The method not only has academic research value, but also has a certain industrialization prospect.
- -
-
Paragraph 0037-0038
(2021/07/14)
-
- KB3H8: An environment-friendly reagent for the selective reduction of aldehydes and ketones to alcohols
-
Selective reduction of aldehydes and ketones to their corresponding alcohols with KB3H8, an air- and moisture-stable, nontoxic, and easy-to-handle reagent, in water and THF has been explored under an air atmosphere for the first time. Control experiments illustrated the good selectivity of KB3H8 over NaBH4 for the reduction of 4-acetylbenzaldehyde and aromatic keto esters. This journal is
- Li, Xinying,Mi, Tongge,Guo, Wenjing,Ruan, Zhongrui,Guo, Yu,Ma, Yan-Na,Chen, Xuenian
-
supporting information
p. 12776 - 12779
(2021/12/10)
-
- A Water/Toluene Biphasic Medium Improves Yields and Deuterium Incorporation into Alcohols in the Transfer Hydrogenation of Aldehydes
-
Deuterium labeling is an interesting process that leads to compounds of use in different fields. We describe the transfer hydrogenation of aldehydes and the selective C1 deuteration of the obtained alcohols in D2O, as the only deuterium source. Different aromatic, alkylic and α,β-unsaturated aldehydes were reduced in the presence of [RuCl(p-cymene)(dmbpy)]BF4, (dmbpy=4,4′-dimethyl-2,2′-bipyridine) as the pre-catalyst and HCO2Na/HCO2H as the hydrogen source. Moreover, furfural and glucose, were selectively reduced to the valuable alcohols, furfuryl alcohol and sorbitol. The processes were carried out in neat water or in a biphasic water/toluene system. The biphasic system allowed easy recycling, higher yields, and higher selective D incorporation (using D2O/toluene). The deuteration took place due to an efficient effective M–H/D+ exchange from D2O that allows the inversion of polarity of D+ (umpolung). DFT calculations that explain the catalytic behavior in water are also included.
- Ruiz-Casta?eda, Margarita,Santos, Lucía,Manzano, Blanca R.,Espino, Gustavo,Jalón, Félix A.
-
supporting information
p. 1358 - 1372
(2021/03/16)
-
- Ruthenium(II) Complex of a Tridentate Azoaromatic Pincer Ligand and its Use in Catalytic Transfer Hydrogenation of Aldehydes and Ketones with Isopropanol
-
In this work, a new Ru(II) complex with the redox-active pincer 2,6-bis(phenylazo)pyridine ligand (L) is reported which acts as a metal-ligand bifunctional catalyst for transfer hydrogenation reactions. The isolated complex [(L)Ru(PMe2Ph)2(CH3CN)](ClO4)2; [1](ClO4)2 is characterized by a host of spectroscopic measurements and X-ray structure determination. It is diamagnetic and single-crystal X-ray structure analysis reveals that [1]2+ adopts a distorted octahedral geometry where L binds Ru center in meridional fashion. The observed elongation in the coordinated azo bond length (1.29 ?) is attributed to the extensive π-back bonding, dπ(RuII)→π*(azo)L. The complex [1](ClO4)2 acts as an efficient catalyst, which brings about catalytic transfer hydrogenation reactions of a broad array of aldehydes and ketones in isopropanol and in inert conditions. The selectivity of the catalyst for aldehyde reduction over the other reducible functional groups such as nitro, nitrile, ester etc was also investigated. Mechanistic studies, examined by suitable control reactions and isotope labelling experiments, indicate synergistic participation of both ligand and metal centres via the formation of a fleeting Ru?H intermediate and hydrogen walking to the coordinated azo function of L.
- Saha, Tanushri,Prasad Rath, Santi,Goswami, Sreebrata
-
p. 1455 - 1461
(2021/05/18)
-
- Reaction of Diisobutylaluminum Borohydride, a Binary Hydride, with Selected Organic Compounds Containing Representative Functional Groups
-
The binary hydride, diisobutylaluminum borohydride [(iBu)2AlBH4], synthesized from diisobutylaluminum hydride (DIBAL) and borane dimethyl sulfide (BMS) has shown great potential in reducing a variety of organic functional groups. This unique binary hydride, (iBu)2AlBH4, is readily synthesized, versatile, and simple to use. Aldehydes, ketones, esters, and epoxides are reduced very fast to the corresponding alcohols in essentially quantitative yields. This binary hydride can reduce tertiary amides rapidly to the corresponding amines at 25 °C in an efficient manner. Furthermore, nitriles are converted into the corresponding amines in essentially quantitative yields. These reactions occur under ambient conditions and are completed in an hour or less. The reduction products are isolated through a simple acid-base extraction and without the use of column chromatography. Further investigation showed that (iBu)2AlBH4 has the potential to be a selective hydride donor as shown through a series of competitive reactions. Similarities and differences between (iBu)2AlBH4, DIBAL, and BMS are discussed.
- Amberchan, Gabriella,Snelling, Rachel A.,Moya, Enrique,Landi, Madison,Lutz, Kyle,Gatihi, Roxanne,Singaram, Bakthan
-
supporting information
p. 6207 - 6227
(2021/05/06)
-
- In situthermosensitive hybrid mesoporous silica: preparation and the catalytic activities for carbonyl compound reduction
-
In this study, free-radical polymerisation inside MCM-41 mesopores was examined to expose a construction route for a temperature-responsive switchable polymer-silica nanohybrid material with well-defined porosity. Herein, we introduced a vinyl monomer (N-isopropyl acrylamide), a cross-linker, and an AIBN initiator into the palladium nanoparticle incorporated MCM-41 pore channels using the wet-impregnation method followed byin situradical polymerisation. The structural properties of the synthesised PNIPAM-PdNP-MCM-41 catalyst were analysed by various sophisticated analytical techniques. The temperature switchable nanohybrid catalyst was used to reduce carbonyl compounds to their corresponding alcohols. The catalyst showed high catalytic efficiency and robustness in an aqueous medium at 25 °C. Moreover, the system's polymer layer remarkably boosted catalytic selectivity and activity for carbonyl compound reduction as compared to other controlled catalysts. The suggested switchable system can be employed as a temperature-controllable heterogeneous catalyst and highlights a substitute technique to counter the methodical insufficiency in switchable supported molecular catalytic system production.
- Ha, Chang-Sik,Mohan, Anandhu,Nagappan, Saravanan,Parambadath, Surendran,Park, Sung Soo,Peter, Jerome,Rout, Lipeeka,Thomas, Anju Maria,Zhang, Wei-Jin
-
p. 11730 - 11741
(2021/09/06)
-
- Uranyl(VI) Triflate as Catalyst for the Meerwein-Ponndorf-Verley Reaction
-
Catalytic transformation of oxygenated compounds is challenging in f-element chemistry due to the high oxophilicity of the f-block metals. We report here the first Meerwein-Ponndorf-Verley (MPV) reduction of carbonyl substrates with uranium-based catalysts, in particular from a series of uranyl(VI) compounds where [UO2(OTf)2] (1) displays the greatest efficiency (OTf = trifluoromethanesulfonate). [UO2(OTf)2] reduces a series of aromatic and aliphatic aldehydes and ketones into their corresponding alcohols with moderate to excellent yields, using iPrOH as a solvent and a reductant. The reaction proceeds under mild conditions (80 °C) with an optimized catalytic charge of 2.3 mol % and KOiPr as a cocatalyst. The reduction of aldehydes (1-10 h) is faster than that of ketones (>15 h). NMR investigations clearly evidence the formation of hemiacetal intermediates with aldehydes, while they are not formed with ketones.
- Kobylarski, Marie,Monsigny, Louis,Thuéry, Pierre,Berthet, Jean-Claude,Cantat, Thibault
-
supporting information
p. 16140 - 16148
(2021/11/01)
-
- Electrochemical Arylation of Aldehydes, Ketones, and Alcohols: from Cathodic Reduction to Convergent Paired Electrolysis
-
Arylation of carbonyls, one of the most common approaches toward alcohols, has received tremendous attention, as alcohols are important feedstocks and building blocks in organic synthesis. Despite great progress, there is still a great gap to develop an ideal arylation method featuring mild conditions, good functional group tolerance, and readily available starting materials. We now show that electrochemical arylation can fill the gap. By taking advantage of synthetic electrochemistry, commercially available aldehydes (ketones) and benzylic alcohols can be readily arylated to provide a general and scalable access to structurally diverse alcohols (97 examples, >10 gram-scale). More importantly, convergent paired electrolysis, the ideal but challenging electrochemical technology, was employed to transform low-value alcohols into more useful alcohols. Detailed mechanism study suggests that two plausible pathways are involved in the redox neutral α-arylation of benzylic alcohols.
- Zhang, Sheng,Li, Lijun,Li, Jingjing,Shi, Jianxue,Xu, Kun,Gao, Wenchao,Zong, Luyi,Li, Guigen,Findlater, Michael
-
supporting information
p. 7275 - 7282
(2021/03/01)
-
- Five-membered heterocycle substituted biphenyl compound and preparation method and application thereof
-
The invention discloses an immune checkpoint inhibitor five-membered heterocycle substituted biphenyl compound capable of blocking a PD-1/PD-L1 signal pathway and a preparation method and application thereof. The compound is shown in the formula I as described in the specification. The compound is novel in structure and can be orally taken, the defects of treatment and drug resistance of a monoclonal antibody immune checkpoint inhibitor are overcome, and as a small-molecule inhibitor, the preparation is simple, and industrial production is convenient; various related tumor diseases can be treated through tumor immunotherapy by regulating and controlling a PD-1/PD-L1 signal pathway, and potential patent medicine prospects are achieved.
- -
-
Paragraph 0198; 0200-0201; 0204-0205
(2021/07/17)
-
- Silver-Catalyzed Hydroboration of C-X (X = C, O, N) Multiple Bonds
-
AgSbF6 was developed as an effective catalyst for the hydroboration of various unsaturated functionalities (nitriles, alkenes, and aldehydes). This atom-economic chemoselective protocol works effectively under low catalyst loading, base- A nd solvent-free moderate conditions. Importantly, this process shows excellent functional group tolerance and compatibility with structurally and electronically diverse substrates (>50 examples). Mechanistic investigations revealed that the reaction proceeds via a radical pathway. Further, the obtained N,N-diborylamines were showcased to be useful precursors for amide synthesis.
- Pandey, Vipin K.,Tiwari, Chandra Shekhar,Rit, Arnab
-
supporting information
p. 1681 - 1686
(2021/03/03)
-
- CeO2-nanocubes as efficient and selective catalysts for the hydroboration of carbonyl groups
-
The CeO2-nanoparticle catalysed hydroboration of carbonyl compounds with HBpin (pin = OCMe2CMe2O) is reported to afford the corresponding borate esters in excellent yield. A series of aromatic and aliphatic aldehydes and ketones having synthetically important functional groups were well-Tolerated under mild reaction conditions. Further, chemoselective hydroboration of aldehydes over other reducible functional groups such as ketone, nitrile, hydroxide, alkene, alkyne, amide, ester, nitro, and halides was achieved. Importantly the catalyst can be recycled up to ten runs with slight loss in activity. This journal is
- Bhawar, Ramesh,Bose, Shubhankar Kumar,Patil, Kiran S.
-
supporting information
p. 15028 - 15034
(2021/09/04)
-
- Efficient Solvent-Free Hydrosilylation of Aldehydes and Ketones Catalyzed by Fe2(CO)9/C6H4-o-(NCH2PPh2)2BH
-
An efficient solvent-free catalyst system for hydrosilylation of aldehydes and ketones was developed based on iron pre-catalyst Fe2(CO)9/C6H4-o-(NCH2PPh2)2BH. The reactions were tolerant of many functional groups and the corresponding alcohols were isolated in good to excellent yields following basic hydrolysis of the reaction products. The reaction is likely catalyzed by an in situ generated pincer ligated iron hydride complex. Graphic Abstract: [Figure not available: see fulltext.]
- Fang, Fei,Chang, Jiarui,Zhang, Jie,Chen, Xuenian
-
p. 3509 - 3515
(2021/03/16)
-
- Hydroboration Reaction and Mechanism of Carboxylic Acids using NaNH2(BH3)2, a Hydroboration Reagent with Reducing Capability between NaBH4and LiAlH4
-
Hydroboration reactions of carboxylic acids using sodium aminodiboranate (NaNH2[BH3]2, NaADBH) to form primary alcohols were systematically investigated, and the reduction mechanism was elucidated experimentally and computationally. The transfer of hydride ions from B atoms to C atoms, the key step in the mechanism, was theoretically illustrated and supported by experimental results. The intermediates of NH2B2H5, PhCH= CHCOOBH2NH2BH3-, PhCH= CHCH2OBO, and the byproducts of BH4-, NH2BH2, and NH2BH3- were identified and characterized by 11B and 1H NMR. The reducing capacity of NaADBH was found between that of NaBH4 and LiAlH4. We have thus found that NaADBH is a promising reducing agent for hydroboration because of its stability and easy handling. These reactions exhibit excellent yields and good selectivity, therefore providing alternative synthetic approaches for the conversion of carboxylic acids to primary alcohols with a wide range of functional group tolerance.
- Wang, Jin,Ju, Ming-Yue,Wang, Xinghua,Ma, Yan-Na,Wei, Donghui,Chen, Xuenian
-
p. 5305 - 5316
(2021/04/12)
-
- Cyclopentadienone iron tricarbonyl complexes-catalyzed hydrogen transfer in water
-
The development of efficient and low-cost catalytic systems is important for the replacement of robust noble metal complexes. The synthesis and application of a stable, phosphine-free, water-soluble cyclopentadienone iron tricarbonyl complex in the reduction of polarized double bonds in pure water is reported. In the presence of cationic bifunctional iron complexes, a variety of alcohols and amines were prepared in good yields under mild reaction conditions.
- Coufourier, Sébastien,Gaillard, Sylvain,Mbaye, Mbaye Diagne,Ndiaye, Daouda,Renaud, Jean-Luc
-
supporting information
(2020/01/28)
-
- Reduction over Condensation of Carbonyl Compounds through a Transient Hemiaminal Intermediate Using Hydrazine
-
Reduction of carbonyl moieties to the corresponding alcohol using simply hydrazine hydrate has been considerably unfeasible until now due to the well-known condensation reaction. However, herein, we report that using an excess of 20-fold equivalents, the reduction proceeds in excellent yields. 1H NMR study of the reaction and density functional theory (DFT) calculations indicate that the final fate of the hemiaminal intermediate is crucial to obtain the alcohol or the hydrazone.
- Vilches-Herrera, Marcelo,Gallardo-Fuentes, Sebastián,Aravena-Opitz, Mauricio,Yá?ez-Sánchez, Mauricio,Jiao, Haijun,Holz, Jens,B?rner, Armin,Lühr, Susan
-
p. 9213 - 9218
(2020/08/14)
-
- Reduction of Aldehydes with Formic acid in Ethanol using Immobilized Iridium Nanoparticles on a Triazine-phosphanimine Polymeric Organic Support
-
A novel triazine-phosphanimine polymeric organic support (TPA) was synthesized successfully by a controllable one-pot method using melamine (1,3,5-triazine-2,4,6-triamine) and trichlorophosphane (PCl3). The TPA substrate is a material incorporating P and N atoms which can coordinate with metals as a pincer ligand to stabilize them, providing an efficient heterogeneous support to prepare recyclable transition metal catalyst systems. In this study, TPA was used as support to immobilize iridium nanoparticles in the range of ~8 nm on its surface, resulting in the generation of a novel iridium nanocatalyst system (INP-TPA-POP). This catalyst system was characterized using different microscopic and spectroscopic techniques such as FT-IR, TEM, XPS, XRD, SEM, EDX, elemental analysis, ICP and BET analysis. The INP-TPA-POP nanocatalyst exhibited remarkable activity in reduction of aldehydes to alcohols using formic acids as reducing agent in ethanol as solvent.
- Panahi, Farhad,Haghighi, Fatemeh,Khalafi-Nezhad, Ali
-
-
- Pyridine: N-oxide promoted hydrosilylation of carbonyl compounds catalyzed by [PSiP]-pincer iron hydrides
-
Five [PSiP]-pincer iron hydrides 1-5, [(2-Ph2PC6H4)2HSiFe(H)(PMe3)2 (1), (2-Ph2PC6H4)2MeSiFe(H)(PMe3)2 (2), (2-Ph2PC6H4)2PhSiFe(H)(PMe3)2 (3), (2-(iPr)2PC6H4)2HSiFe(H)(PMe3) (4), and (2-(iPr)2PC6H4)2MeSiFe(H)(PMe3)2 (5)], were used as catalysts to study the effects of pyridine N-oxide and the electronic properties of [PSiP]-ligands on the catalytic hydrosilylation of carbonyl compounds. It was proved for the first time that this catalytic process could be promoted with pyridine N-oxide as the initiator at 30 °C because the addition of pyridine N-oxide is beneficial for the formation of an unsaturated hydrido iron complex, which is the key intermediate in the catalytic mechanism. Complex 4 as the best catalyst shows excellent catalytic performance. Among the five complexes, complex 3 was new and the molecular structure of complex 3 was determined by single crystal X-ray diffraction. A proposed mechanism was discussed.
- Chang, Guoliang,Fenske, Dieter,Fuhr, Olaf,Li, Xiaoyan,Sun, Hongjian,Xie, Shangqing,Yang, Wenjing,Zhang, Peng
-
p. 9349 - 9354
(2020/09/09)
-
- Bimetallic Bis-NHC-Ir(III) Complex Bearing 2-Arylbenzo[d]oxazolyl Ligand: Synthesis, Catalysis, and Bimetallic Effects
-
Herein, an unprecedented bimetallic bis-NHC Cp*Ir complex 1 bearing 2-arylbenzo[d]oxazolyl and NHC ligands is reported. A significant increase in activity was observed for N-methylation of amines and reduction of aldehydes with MeOH catalyzed by 1 compared to the monometallic analogues (2-11). Under the optimal conditions, it showed to be highly effective in N-methylation of nitroarenes with MeOH as both C1 and H2 source. Substrates, including aromatic amines, ketones, and nitro compounds with various functional groups, can be well-tolerated. Mechanistic studies and DFT calculation highlight the significance of bimetallic centers cooperativity.
- Huang, Shuang,Hong, Xi,Cui, He-Zhen,Zhan, Bing,Li, Zhi-Ming,Hou, Xiu-Feng
-
p. 3514 - 3523
(2020/10/09)
-
- Catalytic Reductions Without External Hydrogen Gas: Broad Scope Hydrogenations with Tetrahydroxydiboron and a Tertiary Amine
-
Facile reduction of aryl halides with a combination of 5% Pd/C, B2(OH)4, and 4-methylmorpholine is reported. Aryl bromides, iodides, and chlorides were efficiently reduced. Aryl dihalides containing two different halogen atoms underwent selective reduction: I over Br and Cl, and Br over Cl. Beyond these, aryl triflates were efficiently reduced. This combination was broadly general, effectuating reductions of benzylic halides and ethers, alkenes, alkynes, aldehydes, and azides, as well as for N-Cbz deprotection. A cyano group was unaffected, but a nitro group and a ketone underwent reduction to a low extent. When B2(OD)4 was used for aryl halide reduction, a significant amount of deuteriation occurred. However, H atom incorporation competed and increased in slower reactions. 4-Methylmorpholine was identified as a possible source of H atoms in this, but a combination of only 4-methylmorpholine and Pd/C did not result in reduction. Hydrogen gas has been observed to form with this reagent combination. Experiments aimed at understanding the chemistry led to the proposal of a plausible mechanism and to the identification of N,N-bis(methyl-d3)pyridin-4-amine (DMAP-d6) and B2(OD)4 as an effective combination for full aromatic deuteriation. (Figure presented.).
- Korvinson, Kirill A.,Akula, Hari K.,Malinchak, Casina T.,Sebastian, Dellamol,Wei, Wei,Khandaker, Tashrique A.,Andrzejewska, Magdalena R.,Zajc, Barbara,Lakshman, Mahesh K.
-
supporting information
p. 166 - 176
(2020/01/02)
-
- Linear β-amino alcohol catalyst anchored on functionalized magnetite nanoparticles for enantioselective addition of dialkylzinc to aromatic aldehydes
-
A linear β-amino alcohol ligand, previously found to be a very efficient catalyst for enantioselective addition of dialkylzinc to aromatic aldehydes, has been anchored on differently functionalized superparamagnetic core-shell magnetite-silica nanoparticles (1a and 1b). Its catalytic activity in the addition of dialkylzinc to aldehydes has been evaluated, leading to promising results, especially in the case of 1b for which the recovery by simple magnetic decantation and reuse was successfully verified. This journal is
- Ciprioti, Stefano Vecchio,De Angelis, Martina,Di Pietro, Federica,Iannoni, Marika,Pilloni, Luciano,Primitivo, Ludovica,Ricelli, Alessandra,Righi, Francesco,Righi, Giuliana,Sappino, Carla,Suber, Lorenza
-
p. 29688 - 29695
(2020/10/26)
-
- Selective hydrogenation of primary amides and cyclic di-peptides under Ru-catalysis
-
A ruthenium(II)-catalyzed selective hydrogenation of challenging primary amides and cyclic di-peptides to their corresponding primary alcohols and amino alcohols, respectively, is reported. The hydrogenation reaction operates under mild and eco-benign conditions and can be scaled-up.
- Subaramanian, Murugan,Sivakumar, Ganesan,Babu, Jessin K.,Balaraman, Ekambaram
-
supporting information
p. 12411 - 12414
(2020/10/30)
-
- Phenyl-substituted five-membered heterocyclic compounds as well as preparation method, application and pharmaceutical composition thereof
-
The invention discloses immune checkpoint inhibitor phenyl-substituted five-membered heterocyclic compounds capable of blocking a PD-1/PD-L1 signal path as well as a preparation method, application and a pharmaceutical composition thereof. The phenyl-substituted five-membered heterocycle compounds are shown as a formula I. The phenyl-substituted five-membered heterocycle compounds or pharmaceutically acceptable salts, racemates, optical isomers or solvent compounds thereof are disclosed.
- -
-
Paragraph 0215-0218; 0221-0222
(2020/10/14)
-
- Scope and limitations of reductive amination catalyzed by half-sandwich iridium complexes under mild reaction conditions
-
The conversion of aldehydes and ketones to 1° amines could be promoted by half-sandwich iridium complexes using ammonium formate as both the nitrogen and hydride source. To optimize this method for green chemical synthesis, we tested various carbonyl substrates in common polar solvents at physiological temperature (37 °C) and ambient pressure. We found that in methanol, excellent selectivity for the amine over alcohol/amide products could be achieved for a broad assortment of carbonyl-containing compounds. In aqueous media, selective reduction of carbonyls to 1° amines was achieved in the absence of acids. Unfortunately, at Ir catalyst concentrations of 1 mM in water, reductive amination efficiency dropped significantly, which suggest that this catalytic methodology might be not suitable for aqueous applications where very low catalyst concentration is required (e.g., inside living cells).
- Nguyen, Dat P.,Sladek, Rudolph N.,Do, Loi H.
-
supporting information
(2020/07/15)
-
- Structural Elucidation of Silver(I) Amides and Their Application as Catalysts in the Hydrosilylation and Hydroboration of Carbonyls
-
This study details the isolation and characterisation of three novel silver(I) amides in solution and solid-state, [Ag(Cy3P)(HMDS)] 2, [Ag(Cy3P){N(TMS)(Dipp)}] 3 and [Ag(Cy3P)2(NPh2)] 4. Their catalytic abilities have proved successful in hydroboration and hydrosilylation reactions with a full investigation performed with complex 2. Both protocols proceed under mild conditions, displaying exceptional functional-group tolerance and chemoselectivity, in excellent conversions at competitive reaction times. This work reveals the first catalytic hydroboration of aldehydes and ketones performed by a silver(I) catalyst.
- Blair, Victoria L.,Boutland, Aaron J.,Kelly, John A.,Orr, Samantha A.
-
supporting information
p. 4947 - 4951
(2020/04/22)
-
- Efficient One-Pot Reductive Aminations of Carbonyl Compounds with Aquivion-Fe as a Recyclable Catalyst and Sodium Borohydride
-
A one-pot reductive amination of aldehydes and ketones with NaBH4 was developed with a view to providing efficient, economical and greener synthetic conditions. A recyclable iron-based Lewis catalyst, Aquivion-Fe, was used to promote imine formation in cyclopentyl methyl ether, followed by the addition of a small amount of methanol to the reaction mixture to enable C=N reduction by NaBH4. The protocol, applied to a wide number of amines and carbonyl compounds, resulted in ever complete conversion of these latter with excellent chemoselectivity towards the expected amination products in the most cases. Isolated yields, determined for a selection of the screened substrates, were found consistent with the previously obtained conversion and selectivity data. Cinacalcet, an important active pharmaceutical ingredient, was efficiently prepared by the title procedure.
- Airoldi, Veronica,Piccolo, Oreste,Roda, Gabriella,Appiani, Rebecca,Bavo, Francesco,Tassini, Riccardo,Paganelli, Stefano,Arnoldi, Sebastiano,Pallavicini, Marco,Bolchi, Cristiano
-
p. 162 - 168
(2019/12/11)
-
- 1-D manganese(ii)-terpyridine coordination polymers as precatalysts for hydrofunctionalisation of carbonyl compounds
-
Reductive catalysis with earth-abundant metals is currently of increasing importance and shows potential in replacing precious metal catalysis. In this work, we revealed catalytic hydroboration and hydrosilylation of ketones and aldehydes achieved by a structurally defined manganese(ii) coordination polymer (CP) as a precatalyst under mild conditions. The manganese-catalysed methodology can be applied to a range of functionalized aldehydes and ketones with turnover numbers (TON) of up to 990. Preliminary results on the regioselective catalytic hydrofunctionalization of styrenes by the Mn-CP catalyst are also presented.
- Johnson, Jahvon,Li, Sihan,Mo, Zixuan,Neary, Michelle C.,Zeng, Haisu,Zhang, Guoqi,Zheng, Shengping
-
supporting information
p. 2610 - 2615
(2020/03/05)
-
- Palladium-Catalyzed Selective Reduction of Carbonyl Compounds
-
Two new examples of structurally characterized β-diketiminate analogues i.e., conjugated bis-guanidinate (CBG) supported palladium(II) complexes, [LPdX]2; [L= {(ArHN)(ArN)–C=N–C=(NAr)(NHAr)}; Ar = 2,6-Et2-C6H3], X = Cl (1), Br (2) have been reported. The synthesis of complexes 1–2 was achieved by two methods. Method A involves deprotonation of LH by nBuLi followed by the treatment of LLi (insitu formed) with PdCl2 in THF, which afforded compound 1 in good yield (75 %). In Method B, the reaction between free LH and PdX2 (X = Cl or Br) in THF allowed the formation of complexes 1 (Yield 73 %) and 2 (Yield 52 %), respectively. Moreover, these complexes were characterized thoroughly by several spectroscopic techniques (1H, 13C NMR, UV/Vis, FT-IR, and HRMS), including single-crystal X-ray structural and elemental analyses. In addition, we tested the catalytic activity of these complexes 1–2 for the hydroboration of carbonyl compounds with pinacolborane (HBpin). We observed that compound 1 exhibits superior catalytic activity when compared to 2. Compound 1 efficiently catalyzes various aldehydes and ketones under solvent-free conditions. Furthermore, both inter- and intramolecular chemoselectivity hydroboration of aldehydes over other functionalities have been established.
- Sarkar, Nabin,Mahato, Mamata,Nembenna, Sharanappa
-
p. 2295 - 2301
(2020/05/18)
-
- Homogeneous Hydrogenation with a Cobalt/Tetraphosphine Catalyst: A Superior Hydride Donor for Polar Double Bonds and N-Heteroarenes
-
The development of catalysts based on earth abundant metals in place of noble metals is becoming a central topic of catalysis. We herein report a cobalt/tetraphosphine complex-catalyzed homogeneous hydrogenation of polar unsaturated compounds using an air- and moisture-stable and scalable precatalyst. By activation with potassium hydroxide, this cobalt system shows both high efficiency (up to 24 000 TON and 12 000 h-1 TOF) and excellent chemoselectivities with various aldehydes, ketones, imines, and even N-heteroarenes. The preference for 1,2-reduction over 1,4-reduction makes this method an efficient way to prepare allylic alcohols and amines. Meanwhile, efficient hydrogenation of the challenging N-heteroarenes is also furnished with excellent functional group tolerance. Mechanistic studies and control experiments demonstrated that a CoIH complex functions as a strong hydride donor in the catalytic cycle. Each cobalt intermediate on the catalytic cycle was characterized, and a plausible outer-sphere mechanism was proposed. Noteworthy, external inorganic base plays multiple roles in this reaction and functions in almost every step of the catalytic cycle.
- Duan, Ya-Nan,Du, Xiaoyong,Cui, Zhikai,Zeng, Yiqun,Liu, Yufeng,Yang, Tilong,Wen, Jialin,Zhang, Xumu
-
supporting information
p. 20424 - 20433
(2019/12/27)
-
- Ambient-pressure hydrogenation of ketones and aldehydes by a metal-ligand bifunctional catalyst [Cp*Ir(2,2′-bpyO)(H2O)] without using base
-
An efficient catalytic system for hydrogenation of ketones and aldehydes using a Cp*Ir complex [Cp*Ir(2,2′-bpyO)(H2O)] bearing a bipyridine-based functional ligand as catalyst has been developed. A wide variety of secondary and primary alcohols were synthesized by the catalyzed hydrogenation of ketones and aldehydes under facile atmospheric-pressure without a base. The catalyst also displays an excellent chemoselectivity towards other carbonyl functionalities and unsaturated motifs. This catalytic system exhibits high activity for hydrogenation of ketones and aldehydes with H2 gas.
- Wang, Rongzhou,Qi, Jipeng,Yue, Yuancheng,Lian, Zhe,Xiao, Haibin,Zhuo, Shuping,Xing, Lingbao
-
-
- Green and convenient protocols for the efficient reduction of nitriles and nitro compounds to corresponding amines with NaBH4 in water catalyzed by magnetically retrievable CuFe2O4 nanoparticles
-
Abstract: In this study, firstly, CuFe2O4 nanoparticles were prepared by a simple operation. The structure of the mentioned nanoparticles was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma-optical emission spectrometry, vibrating sample magnetometer and also Brunauer–Emmett–Teller and Barrett–Joyner–Halenda analyses. The prepared magnetically copper ferrite nanocomposite was successfully applied as a simple, cost-effective, practicable, and recoverable catalyst on the green, highly efficient, fast, base-free, and ligand-free reduction of nitriles and also on the affordable and eco-friendly reduction of nitro compounds with the broad substrate scope to the corresponding amines with NaBH4 in water at reflux in high to excellent yields. Graphical abstract: [Figure not available: see fulltext.].
- Zeynizadeh, Behzad,Mohammad Aminzadeh, Farkhondeh,Mousavi, Hossein
-
-
- Polypyridyl iridium(III) based catalysts for highly chemoselective hydrogenation of aldehydes
-
Iridium-catalyzed transfer hydrogenation (TH) of carbonyl compounds using HCOOR (R = H, Na, NH4) as a hydrogen source is a pivotal process as it provides the clean process and is easy to execute. However, the existing highly efficient iridium catalysts work at a narrow pH; thus, does not apply to a wide variety of substrates. Therefore, the development of a new catalyst which works at a broad pH range is essential as it can gain a broader scope of utilization. Here we report highly efficient polypyridyl iridium(III) catalysts, [Ir(tpy)(L)Cl](PF6)2 {where tpy = 2,2′:6′,2′'-Terpyridine, L = phen (1,10-Phenanthroline), Me2phen (4,7-Dimethyl-1,10-phenanthroline), Me4phen (3,4,7,8-Tetramethyl-1,10-phenanthroline), Me2bpy (4,4′-Dimethyl-2–2′-dipyridyl)} for the chemoselective reduction of aldehydes to alcohols in aqueous ethanol and sodium formate as the hydride source. The reaction can be carried out efficiently in broad pH ranges, from pH 6 to 11. These catalysts are air stable, easy to prepare using commercially available starting materials, and are highly applicable for a wide range of substrates, such as electron-rich or deficient (hetero)arenes, halogens, phenols, alkoxy, ketones, esters, carboxylic acids, cyano, and nitro groups. Particularly, acid and hydroxy groups containing aldehydes were reduced successfully in basic and acidic reaction conditions, demonstrating the efficiency of the catalyst in a broad pH range with high conversion rates under microwave irradiation.
- Pandrala, Mallesh,Resendez, Angel,Malhotra, Sanjay V.
-
p. 283 - 288
(2019/09/30)
-
- Efficient transfer hydrogenation of carbonyl compounds catalyzed by selenophenolato hydrido iron(II) complexes
-
Selenophenolato hydrido iron(II) complexes 1–3 cis-[(H)(SeAr)Fe(PMe3)4] (Ar = C6H5 (1), p-MeOC6H4 (2) and o-MeC6H4 (3)) could catalyze transfer hydrogenation of aldehydes and ketones. Among the three complexes, catalyst 1 exhibited the highest catalytic activity. The catalytic reactions took place under very mild conditions, using isopropanol as solvent and hydrogen source, tBuONa as base under 60–80 °C. This catalytic system has good tolerance for many functional groups, such as halides, C[dbnd]C double bonds, nitro groups and cyano groups at the phenyl ring of the substrates.
- Wang, Yangyang,Du, Zhengyin,Zheng, Tingting,Sun, Hongjian,Li, Xiaoyan
-
-
- Synthesis of Benzylic Alcohols by C-H Oxidation
-
Selective methylene C-H oxidation for the synthesis of alcohols with a broad scope and functional group tolerance is challenging due to the high proclivity for further oxidation of alcohols to ketones. Here, we report the selective synthesis of benzylic alcohols employing bis(methanesulfonyl) peroxide as an oxidant. We attempt to provide a rationale for the selectivity for monooxygenation, which is distinct from previous work; a proton-coupled electron transfer mechanism (PCET) may account for the difference in reactivity. We envision that our method will be useful for applications in the discovery of drugs and agrochemicals.
- Tanwar, Lalita,B?rgel, Jonas,Ritter, Tobias
-
supporting information
p. 17983 - 17988
(2019/11/14)
-
- Regio- A nd chemoselective deprotection of primary acetates by zirconium hydrides
-
A combination of DIBAL-H and Cp2ZrCl2 is shown to promote the regioselective cleavage of primary acetates on a broad scope of substrates, ranging from carbohydrates to terpene derivatives, with a high tolerance toward protecting groups and numerous functionalities found in natural products and bioactive compounds. Apart from providing highly valuable building blocks in only two steps from biosourced raw materials, this selective de-O-acetylation should also be strongly helpful to solve selectivity issues in organic synthesis.
- Gavel, Marine,Courant, Thibaut,Joosten, Antoine Yvan Philippe,Lecourt, Thomas
-
supporting information
p. 1948 - 1952
(2019/04/10)
-
- Hafnium Triflate as a Highly Potent Catalyst for Regio- and Chemoselective Deprotection of Silyl Ethers
-
As a Group IVB transition metal Lewis acid, hafnium triflate [Hf(OTf) 4 ] exhibited exceptionally high potency in desilylations. Since the amounts of Hf(OTf) 4 required for the deprotection of 1°, 2°, 3° alkyl and aryl tert -butyldimethylsilyl (TBS) ethers are significantly different, ranging from 0.05 mol% to 3 mol%, regioselective deprotection of TBS could be easily implemented. Moreover, chemoselective cleavage of different silyl ethers or removal of TBS in the presence of most hydroxyl protecting groups was also accomplished. NMR analyses of silyl products from TBS deprotection indicated that Hf(OTf) 4 -catalyzed desilylation may proceed via different mechanisms, depending on the solvent used.
- Zheng, Xiu-An,Kong, Rui,Huang, Hua-Shan,Wei, Jing-Ying,Chen, Ji-Zong,Gong, Shan-Shan,Sun, Qi
-
supporting information
p. 944 - 953
(2019/02/10)
-
- Hafnium trifluoromethanesulfonate catalyzed silyl ether protecting group removing method
-
The invention provides a hafnium trifluoromethanesulfonate catalyzed silyl ether protecting group removing method. Various silyl ether protecting groups of nearly 50 kinds of substrates can be efficiently removed in 0.5-16 hours at room temperature by taking 0.02mol%-0.3mol% hafnium trifluoromethanesulfonate as a catalyst, a silyl ether protected hydroxyl compound as a substrate and conventional AR methanol as a solvent. 42 kinds of silyl ether protecting group removing products can be obtained at high yield by performing conventional slica column chromatography purification on a crude product. By regulating the use amount of the catalyst, the Hf(OTf)4 catalyst can realize regioselective removal of 1-degree, 2-degree and 3-degree alkyl TBS and aryl TBS protective groups. Moreover, in a proper equivalent scope, the Hf(OTf)4 catalyst can also realize 1) chemoselective removal of different kinds of silica-based protective groups; and 2) chemoselective removal of 1-degree TBS protective groups under the condition of not affecting a majority of common hydroxyl protective groups.
- -
-
Paragraph 0009; 0014
(2019/01/21)
-
- Synthesis and Catalytic Activity of Iron Hydride Ligated with Bidentate N-Heterocyclic Silylenes for Hydroboration of Carbonyl Compounds
-
We report the synthesis of a novel bidentate N-heterocyclic silylene (NHSi) ligand, N-(LSi:)-N-methyl-2-pyridinamine (1) (L = PhC(NtBu)2), and the first bischelate disilylene iron hydride, [(Si,N)(Si,C)Fe(H)(PMe3)] (2), and monosilylene iron hydride, [(Si,C)Fe(H)(PMe3)3] (2′), through Csp2-H activation of the NHSi ligand. Compounds 1 and 2 were fully characterized by spectroscopic methods and single-crystal X-ray diffraction analysis. Density functional theory calculations indicated the multiple-bond character of the Fe-Si bonds and the π back-donation from Fe(II) to the Si(II) center. Moreover, the strong donor character of ligand 1 enables 2 to act as an efficient catalyst for the hydroboration reaction of carbonyl compounds at room temperature. Chemoselective hydroboration is attained under these conditions. This might be the first example of hydroboration of ketones and aldehydes catalyzed by a silylene hydrido iron complex. A catalytic mechanism was suggested and partially experimentally verified.
- Qi, Xinghao,Zheng, Tingting,Zhou, Junhao,Dong, Yanhong,Zuo, Xia,Li, Xiaoyan,Sun, Hongjian,Fuhr, Olaf,Fenske, Dieter
-
p. 268 - 277
(2019/01/21)
-
- Selective Hydroboration of Carboxylic Acids with a Homogeneous Manganese Catalyst
-
Catalytic reduction of carboxylic acid to the corresponding alcohol is a challenging task of great importance for the production of a variety of value-added chemicals. Herein, a manganese-catalyzed chemoselective hydroboration of carboxylic acids has been developed with a high turnover number (>99?000) and turnover frequency (>2000 h-1) at 25 °C. This method displayed tolerance of electronically and sterically differentiated substrates with high chemoselectivity. Importantly, aliphatic long-chain fatty acids, including biomass-derived compounds, can efficiently be reduced. Mechanistic studies revealed that the reaction occurs through the formation of active manganese-hydride species via an insertion and bond metathesis type mechanism.
- Barman, Milan K.,Das, Kuhali,Maji, Biplab
-
p. 1570 - 1579
(2019/01/30)
-
- New Zinc Catalyst for Hydrosilylation of Carbonyl Compounds
-
A new zinc complex was synthesized and applied in the catalytic hydrosilylation of carbonyl compounds. Optimization of the reaction conditions showed that the presence a substoichiometric amount of methanol accelerates the process significantly. The reaction can proceed at very low catalyst load (down to 0.1 molpercent) under mild reaction conditions. The reaction tolerates the presence of C=C bonds, and thus can be useful for the synthesis of allylic alcohols from α,β-unsaturated aldehydes and ketones.
- Alshakova, Iryna D.,Nikonov, Georgii I.
-
p. 3305 - 3312
(2019/08/28)
-
- Storing redox equivalent in the phenalenyl backbone towards catalytic multi-electron reduction
-
Storing and transferring electrons for multi-electron reduction processes are considered to be the key steps in various important chemical and biological transformations. In this work, we accomplished multi-electron reduction of a carboxylic acid via a hydrosilylation pathway where a redox-active phenalenyl backbone in Co(PLY-O,O)2(THF)2, stores electrons and plays a preponderant role in the entire process. This reduction proceeds by single electron transfer (SET) from the mono-reduced ligand backbone leading to the cleavage of the Si-H bond. Several important intermediates along the catalytic reduction reaction have been isolated and well characterized to prove that the redox equivalent is stored in the form of a C-H bond in the PLY backbone via a ligand dearomatization process. The ligand's extensive participation in storing a hydride equivalent has been conclusively elucidated via a deuterium labelling experiment. This is a rare example where the ligand orchestrates the multielectron reduction process leaving only the metal to maintain the conformational requirements and fine tunes the electronics of the catalyst.
- Bhunia, Mrinal,Sahoo, Sumeet Ranjan,Shaw, Bikash Kumar,Vaidya, Shefali,Pariyar, Anand,Vijaykumar, Gonela,Adhikari, Debashis,Mandal, Swadhin K.
-
p. 7433 - 7441
(2019/08/15)
-
- Preparing method of aromatic nitrile or alkenyl nitrile compound
-
The invention discloses a preparing method of an aromatic nitrile or alkenyl nitrile compound. The preparing method comprises the following step that under protection of inert gas, an aryl or heteroaryl sulphonate compound shown in a formula II or an alkenyl sulphonate compound shown in a formula IV and a cyanation reagent are subjected to a cross-coupling reaction as is shown below in a solvent under the condition of the presence of a nickel complex, metal zinc and an additive to obtain the aromatic nitrile or alkenyl nitrile compound, wherein 4-dimethylamiopryidine (DMAP) is adopted as the additive, and zinc cyanide is adopted as the cyanation reagent. By means of the preparing method, cyanation of aryl sulphonate, heteroaryl sulphonate or alkenyl sulphonate can be simply and efficientlyachieved with a cheap catalysis system; moreover, the functional group compatibility and substrate universality are good, and a better application prospect and higher using value are provided for achieving industrial synthesis of the aromatic nitrile or alkenyl nitrile compound.
- -
-
Paragraph 0130-0132; 0142-0144; 0232-0233
(2019/10/01)
-
- Stabilization of NaBH4 in Methanol Using a Catalytic Amount of NaOMe. Reduction of Esters and Lactones at Room Temperature without Solvent-Induced Loss of Hydride
-
Rapid reaction of NaBH4 with MeOH precludes its use as a solvent for large-scale ester reductions. We have now learned that a catalytic amount of NaOMe (5 mol %) stabilizes NaBH4 solutions in methanol at 25 °C and permits the use of these solutions for the reduction of esters to alcohols. The generality of this reduction method was demonstrated using 22 esters including esters of naturally occurring chiral γ-butyrolactone containing dicarboxylic acids. This method permits the chemoselective reductions of esters in the presence of cyano and nitro groups and the reductive cyclization of a pyrrolidinedione ester to a fused five-membered furo[2,3-b]pyrrole and a (-)-crispine A analogue in high optical and chemical yields. Lactones, aliphatic esters, aromatic esters containing electron-withdrawing groups, and heteroaryl esters are reduced more rapidly than aryl esters containing electron-donating groups. The 11B NMR spectrum of the NaOMe-stabilized NaBH4 solutions showed a minor quartet due to monomethoxyborohydride (NaBH3OMe) that persisted up to 18 h at 25 °C. We postulate that NaBH3OMe is probably the active reducing agent. In support of this hypothesis, the activation barrier for hydride transfer from BH3(OMe)- onto benzoic acid methyl ester was calculated as 18.3 kcal/mol.
- Prasanth,Joseph, Ebbin,Abhijith,Nair,Ibnusaud, Ibrahim,Raskatov, Jevgenij,Singaram, Bakthan
-
p. 1431 - 1440
(2018/02/09)
-
- Effect of Ancillary Ligand in Cyclometalated Ru(II)-NHC-Catalyzed Transfer Hydrogenation of Unsaturated Compounds
-
In an effort to develop efficient Ru(II)-NHC-based catalyst considering their stereoelectronic effect for hydride-transfer reaction, we found that the ancillary NHC ligand can play a significant role in its catalytic performance. This effect is demonstrated by comparing the activity of two different types of orthometalated precatalysts of general formula [(p-cymene)(NHC)RuII(X)] (NHC = an imidazolylidene-based ImNHC, compound 2a-c, or a mesoionic triazolylidene-based tzNHC, compound 4) in transfer hydrogenation of carbonyl substrates. The electron-rich precatalyst, 2c, containing p-OMe-substituted NHC ligand performed significantly better than both unsubstituted complex 2a and p-CF3 substituted electron-poor complex 2b in ketone reduction. Whereas bulky mesoionic triazolylidene ligand containing complex 4 was found to be superior catalyst for aldehyde reduction and the precatalyst 2a is more suitable for the selective transfer hydrogenation of a wide range of aromatic aldimines to amines. To the best of our knowledge, this is the first systematic study on the effect of stereoelectronic tuning of ancillary orthometalated NHC ligand in Ru(II)-catalyzed transfer hydrogenations of various types of unsaturated compounds with broad substrate scope.
- Bauri, Somnath,Donthireddy,Illam, Praseetha Mathoor,Rit, Arnab
-
supporting information
p. 14582 - 14593
(2018/11/25)
-
- Ambient-Pressure and Base-Free Aldehyde Hydrogenation Catalyst Supported by a Bifunctional Abnormal NHC Ligand
-
Catalytic aldehyde hydrogenation is an essential and routinely used chemical synthesis process in both academia and industry. However, there is a serious scarcity of efficient homogeneous catalysts for this process to work under highly demanding atmospheric-pressure, base-free, and aqueous conditions. Addressing this problem, herein, we report an iridium-based catalyst for facile atmospheric-pressure and base-free hydrogenation of various aromatic, heteroaromatic, and aliphatic aldehydes. The catalyst also displays excellent chemoselectivity toward aldehyde over other carbonyl functionalities and unsaturated motifs. Moreover, the catalyst is found to work in H2O (and in H2O-ethanol) medium at ambient temperature. All of the above attributes have been possible to incorporate into this unique catalyst via employing a hybrid bifunctional ligand, which plays a crucial role in facilitating the cleavage of H2 as well as effectively delivering hydride to the substrate without any help of base or pressure.
- Garhwal, Subhash,Maji, Babulal,Semwal, Shrivats,Choudhury, Joyanta
-
supporting information
p. 4720 - 4725
(2018/12/14)
-
- Chemoselective reduction of aldehydes and ketones by potassium diisobutyl-t-butoxy aluminum hydride (PDBBA)
-
t-Butoxy derivatives of DIBALH [lithium diisobutyl-t-butoxyaluminum hydride (LDBBA), sodium diisobutyl-t-butoxyaluminum hydride (SDBBA), and potassium diisobutyl-t-butoxyaluminum hydride (PDBBA)] were examined as chemoselective reducing agents of carbonyl compounds. Among them, PDBBA was found to be the most efficient for the reduction of aldehydes and ketones to the corresponding alcohols in the presence of ester, amide, and nitrile substituents at ambient temperature. In addition, the optimal conditions gave higher chemoselectivity for aldehydes in the presence of ketones.
- Kim, Joo Yeon,Shin, Won Kyu,Jaladi, Ashok Kumar,An, Duk Keun
-
p. 4236 - 4241
(2018/06/30)
-
- Method of reducing carbonyl compound into alcohol in air atmosphere at room temperature
-
The invention belongs to the field of organic synthesis and relates to a method of reducing carbonyl compound into alcohol in air atmosphere at room temperature. The method includes: firstly, adding methanol, a catalyst and the carbonyl compound into a reaction bottle and slowly adding silane into the reaction bottle, magnetically stirring the components and carrying out a reaction for 10 min to 8hours in air atmosphere at room temperature to obtain a mixture containing a benzyl compound after the reaction is finished; secondly, extracting the mixture containing the benzyl compound with an extraction agent dichloromethane, mixing organic phases, and washing the organic phases with a washing agent deionized water, drying the organic phases with anhydrous sodium sulfate, and evaporating theorganic phases to remove a solvent and obtain a crude product of a benzyl alcohol compound; finally, separating and purifying the crude product through column chromatography to prepare a pure productof the benzyl alcohol compound. In the method, a reducing agent is low in toxicity and is clean and environment-friendly. The method is free of a noble metal catalyst and is low in cost, is gentle inreaction conditions, and can reach high selectivity and yield.
- -
-
Paragraph 0058; 0059
(2019/01/08)
-
- Transfer hydrogenation of aldehydes catalyzed by silyl hydrido iron complexes bearing a [PSiP] pincer ligand
-
The synthesis and characterization of a series of silyl hydrido iron complexes bearing a pincer-type [PSiP] ligand (2-R2PC6H4)2SiH2 (R = Ph (1) and iPr (5)) or (2-Ph2PC6H4)2SiMeH (2) were reported. Preligand 1 reacted with Fe(PMe3)4 to afford complex ((2-Ph2PC6H4)SiH)Fe(H)(PMe3)2 (3) in toluene, which was structurally characterized by X-ray diffraction. ((2-iPr2PC6H4)SiH)Fe(H)(PMe3) (6) could be obtained from the reaction of preligand 5 with Fe(PMe3)4 in toluene. Furthermore, complex ((2-iPr2PC6H4)Si(OMe))Fe(H)(PMe3) (7) was isolated by the reaction of complex 6 with 2 equiv. MeOH in THF. The molecular structure of complex 7 was also determined by single-crystal X-ray analysis. Complexes 3, 4, 6 and 7 showed good to excellent catalytic activity for transfer hydrogenation of aldehydes under mild conditions, using 2-propanol as both solvent and hydrogen donor. α,β-Unsaturated aldehydes could be selectively reduced to corresponding α,β-unsaturated alcohols. The catalytic activity of penta-coordinate complex 6 or 7 is stronger than that of hexa-coordinate complex 3 or 4.
- Zhang, Peng,Li, Xiaoyan,Qi, Xinghao,Sun, Hongjian,Fuhr, Olaf,Fenske, Dieter
-
p. 14092 - 14099
(2018/04/25)
-