- Structural studies of two isoelectronic tetrakis isocyano complexes
-
Two isoelectronic tetrakis isocyano compounds, tetra(p-isocyanoanisole) nickel(0) and tetra(p-isocyanoanisole)copper(I) hexafluorophosphate were synthesized from nickel bis cyclooctadiene and copper (I) tetra acetonitrile hexafluorophosphate and the isonitrile, respectively, and their structures were determined. The nickel complex crystallizes in the orthorhombic space group P212121 with a = 9.6709(8), b = 15.2324(13), c = 19.0955(16) A and Z = 4. The copper salt forms crystals with a tetragonal setting in P4/n with a = b = 15.8206(5), c = 6.5848(4) A and Z = 2. Both complexes exhibit the approximate tetrahedral coordination environment expected for 18 valence electron complexes with soft σ-donor π-acceptor ligands. Packing in the nickel complex is dominated by weak π-π stacking, C-H...;πphenyl, and C-H...;π interactions towards the isonitrile carbon and nitrogen atoms, and several slightly stronger C-H...;O interactions. In the copper complex the presence of the PF6 anion allows for the formation of stronger C-H...;F interactions, and these in combination with π-π stacking and C-H...;O hydrogen bonds dominate the packing.
- Perrine, Cynthia L.,Zeller, Matthias,Woolcock, John,Styranec, Timothy M.,Hunter, Allen D.
-
-
Read Online
- Synthesis, coordination and catalytic use of phosphinoferrocene ligands bearing 6-phospha-2,4,6-trioxaadamantane P-donor moieties
-
1,1’-Bis(diphenylphosphino)ferrocene (dppf) and structurally related ferrocene bis-phosphines are indispensable ligands for coordination chemistry and catalysis. This contribution focuses on the coordination behaviour and catalytic properties of two dppf congeners bearing 1,3,5,7-tetramethyl-2,4,6-trioxa-8-phosphatricyclo[3.3.1.13,7]decane-8-yl groups (CgP) as the P-donor moieties, viz. Ph2PfcCgP (1) and its semi-homologous counterpart Ph2PfcCH2CgP (2; fc = ferrocene-1,1’-diyl). In reactions with a PdCl2 source, compound 1 produced exclusively the cis-chelate complex [PdCl2(1-κ2P,P’)], while the homologated ligand 2 afforded a complex mixture of compounds which equilibrated upon heating in methanol in favour of the symmetrical dimeric complex trans-[(μ-2)PdCl2]2 as a mixture of racemic and meso isomers. Notably, in aqueous Pd-catalysed cyanation of aryl bromides and Suzuki-Miyaura-type cross-coupling of benzoyl chlorides with boronic acids producing benzophenones, catalysts generated in situ from bis-phosphine 1 and Pd(II) sources were often more active than their counterparts resulting from dppf and 2.
- ?těpni?ka, Petr,Císa?ová, Ivana,Horky, Filip
-
-
- Cyanide-Free Cyanation of sp2 and sp-Carbon Atoms by an Oxazole-Based Masked CN Source Using Flow Microreactors
-
This work reports a cyanide-free continuous-flow process for cyanation of sp2 and sp carbons to synthesize aryl, vinyl and acetylenic nitriles from (5-methyl-2-phenyloxazol-4-yl) boronic acid [OxBA] reagent as a sole source of carbon-bound mask
- Sharma, Brijesh M.,Nikam, Arun V.,Lahore, Santosh,Ahn, Gwang-Noh,Kim, Dong-Pyo
-
supporting information
(2022/02/25)
-
- Nitrile Synthesis via Desulfonylative-Smiles Rearrangement
-
Herein, we designed a simple nitrile synthesis from N-[(2-nitrophenyl)sulfonyl]benzamides via base-promoted intramolecular nucleophilic aromatic substitution. The process features redox-neutral conditions as well as no requirement of toxic cyanide species and transition metals. Our process shows broad scope and various functional group compatibility, affording a variety of (hetero)aromatic nitriles in good to excellent yields.
- Abe, Masahiro,Nitta, Sayasa,Miura, Erina,Kimachi, Tetsutaro,Inamoto, Kiyofumi
-
p. 4460 - 4467
(2022/03/15)
-
- A Mild Heteroatom (O -, N -, and S -) Methylation Protocol Using Trimethyl Phosphate (TMP)-Ca(OH) 2Combination
-
A mild heteroatom methylation protocol using trimethyl phosphate (TMP)-Ca(OH)2combination has been developed, which proceeds in DMF, or water, or under neat conditions, at 80 °C or at room temperature. A series of O-, N-, and S-nucleophiles, including phenols, sulfonamides, N-heterocycles, such as 9H-carbazole, indole derivatives, and 1,8-naphthalimide, and aryl/alkyl thiols, are suitable substrates for this protocol. The high efficiency, operational simplicity, scalability, cost-efficiency, and environmentally friendly nature of this protocol make it an attractive alternative to the conventional base-promoted heteroatom methylation procedures.
- Tang, Yu,Yu, Biao
-
-
- Palladium-catalyzed synthesis of nitriles from N-phthaloyl hydrazones
-
The Pd-catalyzed transformation of N-phthaloyl hydrazones into nitriles involving the cleavage of an N-N bond is reported. The use of N-heterocyclic carbene as a ligand is essential for the success of the reaction. N-Phthaloyl hydrazones prepared from aromatic aldehydes or cyclobutanones are applicable to this transformation, which gives aryl or alkenyl nitriles, respectively.
- Ano, Yusuke,Chatani, Naoto,Higashino, Masaya,Yamada, Yuki
-
supporting information
p. 3799 - 3802
(2022/04/07)
-
- Construction of N-Acyliminophosphoranes via Iron(II)-Catalyzed Imidization of Phosphines with N-Acyloxyamides
-
Employing FeCl2as a cheap and readily available catalyst, a facile imidization of phosphines with N-acyloxyamides is described, affording synthetically useful N-acyliminophosphoranes with high functional group tolerance. The transformation is easily performed under an air atmosphere at room temperature and could be scaled up to gram scale with a catalyst loading of 1 mol %. The iminophosphoranyl moiety in the product was further utilized as an effective directing group for controllable ortho C(sp2)-H bond amidations under Rh(III) catalysis.
- Lin, Sen,Lin, Bo,Zhang, Zongtao,Chen, Jianhui,Luo, Yanshu,Xia, Yuanzhi
-
p. 3302 - 3306
(2022/05/05)
-
- Production method of anisonitrile
-
The invention belongs to the technical field of chemical engineering, and particularly relates to a production method of anisonitrile, which comprises: 1) carrying out an amidation reaction on p-hydroxybenzoic acid and carbamate under the action of a catalyst to generate p-hydroxybenzamide, 2) synthesizing p-methoxybenzamide from p-hydroxybenzamide in dimethyl carbonate under the action of the catalyst, and 3) dehydrating the p-methoxybenzamide in dimethyl carbonate in the presence of a dehydrating agent at 80-90 DEG C for 3-6 hours to obtain the anisonitrile. The purity of the anisonitrile product obtained by the production method is as high as 99.4%-99.8%, the yield of the anisonitrile product is as high as 98.0%-99.2%, the total yield of the reaction is as high as 95.7%-98.1% based on p-hydroxybenzoic acid, the yield is high, highly toxic substances are not used in the production process, no wastewater is generated, the used solvent is safe, environment-friendly and easy to recover,the raw materials are low in price, and large-scale production can be achieved.
- -
-
Paragraph 0039-0040; 0043-0046; 0049-0052; 0055-0056
(2021/03/30)
-
- Facile dehydration of primary amides to nitriles catalyzed by lead salts: The anionic ligand matters
-
The synthesis of nitrile under mild conditions was achieved via dehydration of primary amide using lead salts as catalyst. The reaction processes were intensified by not only adding surfactant but also continuously removing the only by-product, water from the system. Both aliphatic and aromatic nitriles can be prepared in this manner with moderate to excellent yields. The reaction mechanisms were obtained with high-level quantum chemical calculations, and the crucial role the anionic ligand plays in the transformations were revealed.
- Ruan, Shixiang,Ruan, Jiancheng,Chen, Xinzhi,Zhou, Shaodong
-
-
- Method for dehydrating primary amide into nitriles under catalysis of cobalt
-
The invention provides a method for dehydrating primary amide into nitrile. The method comprises the following steps: mixing primary amide (II), silane, sodium triethylborohydride, aminopyridine imine tridentate nitrogen ligand cobalt complex (I) and a reaction solvent under the protection of inert gas, carrying out reacting at 60-100 DEG C for 6-24 hours, and post-treating reaction liquid to obtain a nitrile compound (III). According to the invention, an effective method for preparing nitrile compounds by cobalt-catalyzed primary amide dehydration reaction by using the novel aminopyridine imine tridentate nitrogen ligand cobalt complex catalyst is provided; and compared with existing methods, the method has the advantages of simple operation, mild reaction conditions, wide application range of reaction substrates, high selectivity, stable catalyst, high efficiency, and relatively high practical application value in synthesis.
- -
-
Paragraph 0069-0071
(2021/06/21)
-
- Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex
-
A terminal [Ni-OH] complex1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst1is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of1towards amide reduction follows an inverse trend,i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.
- Bera, Jitendra K.,Pandey, Pragati
-
supporting information
p. 9204 - 9207
(2021/09/20)
-
- A highly stable all-in-one photocatalyst for aryl etherification: The NiIIembedded covalent organic framework
-
The efficient conversion of aryl bromides to the corresponding aryl alkyl ethers by dual nickel/photocatalysis has seen great progress, but difficulties of recycling the photosensitizer or nickel complexes cause problems of sustainability. Here, we report the design of a novel, highly stable vinyl bridge 2D covalent organic framework (COF) containing Ni, which combines the role of photosensitizer and reactive site. The as-prepared sp2c-COFdpy-Ni acts as an efficient heterogeneous photocatalyst for C-O cross coupling. The sp2c-COFdpy-Ni can be completely recovered and used repeatedly without loss of activity, overcoming the limitations of the prior methods. Preliminary studies reveal that strong interlayer electron transfer may facilitate the generation of the proposed intermediate sp2c-COFdpy-NiI in a bimolecular and self-sustained manner. This all-in-one heterogeneous photocatalyst exhibits good compatibility of substrates and tolerance of functional groups. The successful attempt to expand the 2D COFs with this new catalyst into photocatalytic organic transformation opens an avenue for photoredox/transition metal mediated coupling reactions.
- Chen, Hao,Dong, Wenbo,Hu, Jianxiang,Rao, Li,Wang, Pei,Wang, Shengyao,Xiang, Yonggang,Yang, Yi
-
p. 5797 - 5805
(2021/08/23)
-
- Visible-Light Promoted C–O Bond Formation with an Integrated Carbon Nitride–Nickel Heterogeneous Photocatalyst
-
Ni-deposited mesoporous graphitic carbon nitride (Ni-mpg-CNx) is introduced as an inexpensive, robust, easily synthesizable and recyclable material that functions as an integrated dual photocatalytic system. This material overcomes the need of expensive photosensitizers, organic ligands and additives as well as limitations of catalyst deactivation in the existing photo/Ni dual catalytic cross-coupling reactions. The dual catalytic Ni-mpg-CNx is demonstrated for C–O coupling between aryl halides and aliphatic alcohols under mild condition. The reaction affords the ether product in good-to-excellent yields (60–92 %) with broad substrate scope, including heteroaryl and aryl halides bearing electron-withdrawing, -donating and neutral groups. The heterogeneous Ni-mpg-CNx can be easily recovered from the reaction mixture and reused over multiple cycles without loss of activity. The findings highlight exciting opportunities for dual catalysis promoted by a fully heterogeneous system.
- Vijeta, Arjun,Casadevall, Carla,Roy, Souvik,Reisner, Erwin
-
supporting information
p. 8494 - 8499
(2021/03/08)
-
- Visible-Light-Promoted Metal-Free Synthesis of (Hetero)Aromatic Nitriles from C(sp3)?H Bonds**
-
The metal-free activation of C(sp3)?H bonds to value-added products is of paramount importance in organic synthesis. We report the use of the commercially available organic dye 2,4,6-triphenylpyrylium tetrafluoroborate (TPP) for the conversion of methylarenes to the corresponding aryl nitriles via a photocatalytic process. Applying this methodology, a variety of cyanobenzenes have been synthesized in good to excellent yield under metal- and cyanide-free conditions. We demonstrate the scope of the method with over 50 examples including late-stage functionalization of drug molecules (celecoxib) and complex structures such as l-menthol, amino acids, and cholesterol derivatives. Furthermore, the presented synthetic protocol is applicable for gram-scale reactions. In addition to methylarenes, selected examples for the cyanation of aldehydes, alcohols and oximes are demonstrated as well. Detailed mechanistic investigations have been carried out using time-resolved luminescence quenching studies, control experiments, and NMR spectroscopy as well as kinetic studies, all supporting the proposed catalytic cycle.
- Murugesan, Kathiravan,Donabauer, Karsten,K?nig, Burkhard
-
supporting information
p. 2439 - 2445
(2020/12/07)
-
- Highly Efficient Oxidative Cyanation of Aldehydes to Nitriles over Se,S,N-tri-Doped Hierarchically Porous Carbon Nanosheets
-
Oxidative cyanation of aldehydes provides a promising strategy for the cyanide-free synthesis of organic nitriles. Design of robust and cost-effective catalysts is the key for this route. Herein, we designed a series of Se,S,N-tri-doped carbon nanosheets with a hierarchical porous structure (denoted as Se,S,N-CNs-x, x represents the pyrolysis temperature). It was found that the obtained Se,S,N-CNs-1000 was very selective and efficient for oxidative cyanation of various aldehydes including those containing other oxidizable groups into the corresponding nitriles using ammonia as the nitrogen resource below 100 °C. Detailed investigations revealed that the excellent performance of Se,S,N-CNs-1000 originated mainly from the graphitic-N species with lower electron density and synergistic effect between the Se, S, N, and C in the catalyst. Besides, the hierarchically porous structure could also promote the reaction. Notably, the unique feature of this metal-free catalyst is that it tolerated other oxidizable groups, and showed no activity on further reaction of the products, thereby resulting in high selectivity. As far as we know, this is the first work for the synthesis of nitriles via oxidative cyanation of aldehydes over heterogeneous metal-free catalysts.
- Hua, Manli,Song, Jinliang,Huang, Xin,Liu, Huizhen,Fan, Honglei,Wang, Weitao,He, Zhenhong,Liu, Zhaotie,Han, Buxing
-
supporting information
p. 21479 - 21485
(2021/08/23)
-
- A Molecular Iron-Based System for Divergent Bond Activation: Controlling the Reactivity of Aldehydes
-
The direct synthesis of amides and nitriles from readily available aldehyde precursors provides access to functional groups of major synthetic utility. To date, most reliable catalytic methods have typically been optimized to supply one product exclusively. Herein, we describe an approach centered on an operationally simple iron-based system that, depending on the reaction conditions, selectively addresses either the C=O or C-H bond of aldehydes. This way, two divergent reaction pathways can be opened to furnish both products in high yields and selectivities under mild reaction conditions. The catalyst system takes advantage of iron's dual reactivity capable of acting as (1) a Lewis acid and (2) a nitrene transfer platform to govern the aldehyde building block. The present transformation offers a rare control over the selectivity on the basis of the iron system's ionic nature. This approach expands the repertoire of protocols for amide and nitrile synthesis and shows that fine adjustments of the catalyst system's molecular environment can supply control over bond activation processes, thus providing easy access to various products from primary building blocks.
- Chatterjee, Basujit,Jena, Soumyashree,Chugh, Vishal,Weyhermüller, Thomas,Werlé, Christophe
-
p. 7176 - 7185
(2021/06/30)
-
- Copper-Catalyzed One-Pot Synthesis of Quinazolinones from 2-Nitrobenzaldehydes with Aldehydes: Application toward the Synthesis of Natural Products
-
A novel, efficient, and atom-economical approach for the construction of quinazolinones from 2-nitrobenzaldehydes has been unveiled via copper-catalyzed nitrile formation, hydrolysis, and reduction in one pot for the first time. In this reaction, urea is used as a source of nitrogen for nitrile formation, hydrazine hydrate is used for both the reduction of the nitro group and the hydrolysis of nitrile, and atmospheric oxygen is used as the sole oxidant. The method portrays a wide substrate scope with good functional group tolerances. Moreover, this method was applied for the synthesis of schizocommunin, tryptanthrin, phaitanthrin-A, phaitanthrin-B, and 8H-quinazolino[4,3-b]quinazolin-8-one.
- Pal, Shantanu,Sahoo, Subrata
-
p. 18067 - 18080
(2021/12/06)
-
- Efficient nitriding reagent and application thereof
-
The invention discloses an efficient nitriding reagent and application thereof, wherein the nitriding reagent comprises nitrogen oxide, an active agent, a reducing agent and an organic solvent. By applying the nitriding reagent, nitrogen-containing compounds such as amide, nitrile and the like can be produced, and the method is simple in condition, low in waste discharge amount and simple in reaction equipment.
- -
-
Paragraph 0200-0202
(2021/03/31)
-
- SO2F2-mediated oxidation of primary and tertiary amines with 30% aqueous H2O2 solution
-
A highly efficient and selective oxidation of primary and tertiary amines employing SO2F2/H2O2/base system was described. Anilines were converted to the corresponding azoxybenzenes, while primary benzylamines were transformed into nitriles and secondary benzylamines were rearranged to amides. For tertiary amine substrates quinolines, isoquinolines and pyridines, their oxidation products were the corresponding N-oxides. The reaction conditions are very mild and just involve SO2F2, amines, 30% aqueous H2O2 solution, and inorganic base at room temperature. One unique advantage is that this oxidation system is just composed of inexpensive inorganic compounds without the use of any metal and organic compounds.
- Liao, Xudong,Zhou, Yi,Ai, Chengmei,Ye, Cuijiao,Chen, Guanghui,Yan, Zhaohua,Lin, Sen
-
supporting information
(2021/11/01)
-
- Half-Sandwich Ruthenium Complexes Bearing Hemilabile κ2-(C,S)?Thioether-Functionalized NHC Ligands: Application to Amide Synthesis from Alcohol and Amine
-
Amide synthesis is one of the most crucial transformations in chemistry and biology. Among various catalytic systems, N-heterocyclic carbene (NHC)-based ruthenium (Ru) catalyst systems have been proven to be active for direct synthesis of amides by sustainable acceptorless dehydrogenative Coupling of primary alcohols with amines. Most often, these catalytic systems usually use monodentate NHC and thus require an additional ligand to obtain high reactivity and selectivity. In this work, a series of cationic Ru(II)(η6-p-cymene) complexes with thioether-functionalized N-heterocyclic carbene ligands (imidazole and benzimidazole-based) have been prepared and fully characterized. These complexes have then been used in the amidation reaction and the most promising one (i. e. 3 c) has been applied on a large range of substrates. High conversions albeit with moderate yields have generally been obtained.
- Achard, Thierry,Bellemin-Laponnaz, Stéphane,Chen, Weighang,Egly, Julien,Maisse-Fran?ois, Aline
-
supporting information
(2022/01/20)
-
- Method for catalyzing oxidation of amines to generate nitrile by using nonmetal mesoporous nitrogen-doped carbon material
-
The invention discloses a method for preparing nitrile by catalyzing amine oxidation with a non-metal mesoporous nitrogen-doped carbon material catalyst, which is applied to the field of synthesis, the material is prepared by using a nitrogen-containing organic ligand as a precursor and silica sol as a template agent, calcining in the atmosphere of inert gases such as N2 or Ar and then removing the template agent; oxygen or air is used as an oxygen source, the reaction is performed at 80-130 DEG C under the action of ammonia water in the presence of a solvent, the effect is good, and the product still keeps higher activity after being recycled for more than 8 times, and has a wide industrial application prospect. The invention provides a heterogeneous non-metal catalytic system for catalyzing amine oxidation to prepare nitrile for the first time, and compared with a reported metal catalyst, the heterogeneous non-metal catalytic system does not bring metal pollution to a product to influence the effect of cyano drugs.
- -
-
Paragraph 0019; 0026
(2021/05/08)
-
- A new reagent for efficient synthesis of nitriles from aldoximes using methoxymethyl bromide
-
This study outlines an efficient, high-yielding, and rapid method by which to access diverse nitriles from aldoximes with methoxymethyl bromide (MOM-Br) in THF. It represents the first application of MOM-Br as a deoximation reagent to synthesize nitriles. The reaction was performed at reflux to ensure excellent yield (79-96%) of the nitriles within 20-45 minutes. Furthermore, this method has been successfully applied to the synthesis of the synthesis precursor of aromatic, heteroaromatic, cyclic, and acyclic aliphatic.
- ULUDAG, Nesimi,GIDEN, Ozge NUR
-
p. 993 - 998
(2021/02/05)
-
- Dehydration of aldoximes to nitriles using trichloroacetonitrile without catalyst
-
Trichloroacetonitrile has been found to be an efficient dehydrating agent for a range of aldoximes including aromatic and heterocyclic aldoxime yielding the corresponding nitriles in moderate to good yields. The dehydration reactions can take place in non-acetonitrile media without the aid of a metal catalyst. In addition, it has been confirmed that trichloroacetonitrile was converted into trichloroacetamide in the reaction.
- Ma, Xiaoyun,Liu, Dan,Chen, Zhengjian
-
p. 3261 - 3266
(2021/06/30)
-
- Water-Dispersible Pd–N-Heterocyclic Carbene Complex Immobilized on Magnetic Nanoparticles as a New Heterogeneous Catalyst for Fluoride-Free Hiyama, Suzuki–Miyaura and Cyanation Reactions in Aqueous Media
-
Abstract: Pd–N-heterocyclic carbine complex immobilized on magnetic nanoparticles is synthesized and characterized by different techniques such as FT-IR, XPS, TEM, EDX, FESEM, VSM, TGA, and ICP. The synthesized catalyst was used as a new water dispersible heterogeneous catalyst in the fluoride-free Hiyama, Suzuki–Miyaura and cyanation reactions in pure water. By this method, different types of biaryls and aryl nitriles were synthesized in good to high yields by the reaction of a variety of aryl iodides, bromides and chlorides with triethoxyphenylsilane, phenylboronic acid and K4[Fe(CN)6]·3H2O, respectively. The presence of sulfonates as hydrophilic groups on the surface of the catalyst confers a highly water dispersible, active and yet magnetically recoverable Pd catalyst. The possibility to perform the reaction in water as a green medium, ease of the catalyst recovery and reuse by magnetic separation, and the absence of any additives or co-solvents make this method as an eco-friendly and economical protocol for the synthesis of biaryl derivatives and aryl nitriles. Graphic Abstract: A new water dispersible heterogeneous Pd–N-heterocyclic carbene for the efficient fluoride-free Hiyama, Suzuki–Miyaura and cyanation reactions in pure water is developed.[Figure not available: see fulltext.].
- Chahkamali, Farhad Omarzehi,Sansano, José Miguel,Sobhani, Sara
-
-
- Recyclable and Reusable Pd(OAc)2/XPhos–SO3Na/PEG-400/H2O System for Cyanation of Aryl Chlorides with Potassium Ferrocyanide
-
Pd(OAc)2/XPhos–SO3Na in a mixture of poly(ethylene glycol) (PEG-400) and water is shown to be a highly efficient catalyst for the cyanation of aryl chlorides with potassium ferrocyanide. The reaction proceeded smoothly at 100 or 120?oC with K2CO3 or KOAc as base, delivering a variety of aromatic nitriles in good to excellent yields. The isolation of the crude products is facilely performed by extraction with cyclohexane and more importantly, both expensive Pd(OAc)2 and XPhos–SO3Na in PEG-400/H2O system could be easily recycled and reused at least six times without any apparent loss of catalytic efficiency. Graphical Abstract: Palladium-catalyzed cyanation of aryl chlorides with potassium ferrocyanide leading to aryl nitriles by using Pd(OAc)2/XPhos–SO3Na/PEG-400/H2O as a highly efficient and recyclable catalytic system is described.[Figure not available: see fulltext.]
- Cai, Mingzhong,Huang, Bin,Liu, Rong,Xu, Caifeng
-
-
- Product selectivity controlled by manganese oxide crystals in catalytic ammoxidation
-
The performances of heterogeneous catalysts can be effectively tuned by changing the catalyst structures. Here we report a controllable nitrile synthesis from alcohol ammoxidation, where the nitrile hydration side reaction could be efficiently prevented by changing the manganese oxide catalysts. α-Mn2O3 based catalysts are highly selective for nitrile synthesis, but MnO2-based catalysts including α, β, γ, and δ phases favour the amide production from tandem ammoxidation and hydration steps. Multiple structural, kinetic, and spectroscopic investigations reveal that water decomposition is hindered on α-Mn2O3, thus to switch off the nitrile hydration. In addition, the selectivity-control feature of manganese oxide catalysts is mainly related to their crystalline nature rather than oxide morphology, although the morphological issue is usually regarded as a crucial factor in many reactions.
- Hui, Yu,Luo, Qingsong,Qin, Yucai,Song, Lijuan,Wang, Hai,Wang, Liang,Xiao, Feng-Shou
-
p. 2164 - 2172
(2021/09/20)
-
- Oxidation/ MCR domino protocol for direct transformation of methyl benzene, alcohol, and nitro compounds to the corresponding tetrazole using a three-functional redox catalytic system bearing TEMPO/Co(III)-porphyrin/ Ni(II) complex
-
A redox catalytic system for oxidation-reduction reactions and the domino preparation of tetrazole compounds from nitro and alcohol precursors was designed, prepared and characterized by UV–vis, GPC, TGA, XRD, EDX, XPS, VSM, FE-SEM, TEM, DLS, BET, NMR, and ICP analyses. The catalyst was prepared via several successive steps by demetalation of chlorophyll b, copolymerization with acrylated TEMPO monomers, complexation with Ni and Co metals (In two different steps), then immobilized on magnetic nanoparticles. The presence of three functional groups including TEMPO, coordinated cobalt, and coordinated nickel in the catalyst, allowed the oxidation of various types of alcohols, alkyl benzenes as well as the reduction of nitro compounds by a single catalyst. All reactions yielded up to 97 % selectivity for oxidation and reduction reactions. Next, the ability of the catalyst to successfully convert alcohol, methyl benzenes and nitro to their corresponding tetrazoles was studied.
- Mahmoudi, Boshra,Rostami, Amin,Kazemnejadi, Milad,Hamah-Ameen, Baram Ahmed
-
-
- Selective oxidation of alcohols to nitriles with high-efficient Co-[Bmim]Br/C catalyst system
-
An efficient method for catalyzing the ammoxidation of aromatic alcohols to aromatic nitriles was developed, in which a new heterogeneous catalyst based on transition metal elements was employed, the new catalyst was named Co-[Bmim]Br/C-700 and then characterized by X-ray photo-electronic spectroscopy, transmission electron microscope and X-ray diffraction. The reaction was carried out by two consecutive dehydrogenations under the catalysis of Co-[Bmim]Br/C-700, which catalytically oxidized the alcohol to the aldehyde, and then the aldehyde was subjected to ammoxidation to the nitrile. The catalyst system was suitable for a wide range of substrates and nitriles obtained in high yields, especially, the conversion rate of benzyl alcohol, 4-methoxybenzyl alcohol, 4-chlorobenzyl alcohol and 4-nitrobenzyl alcohol reached 100%. The substitution of ammonia and oxygen for toxic cyanide to participate in the reaction accords with the theory of green chemistry.
- Xia, Yu-Yan,Lv, Qing-Yang,Yuan, Hua,Wang, Jia-Yi
-
p. 3957 - 3964
(2021/04/09)
-
- Preparation method of aromatic nitrile compound
-
The invention discloses a preparation method of an aromatic nitrile compound, which comprises the following steps: stirring benzyl alcohol, ammonia water and a transition metal doped MCM-48 molecular sieve supported bis-imidazole ionic liquid in a reaction vessel, introducing oxygen, and reacting at 20-90 DEG C for 1-12 hours to obtain the target aromatic nitrile compound. The functionalized transition metal doped MCM-48 molecular sieve supported bis-imidazole ionic liquid is adopted as the catalyst, and the catalyst is high in activity, high in catalytic efficiency, good in stability, easy to recover and capable of being well recycled. The method has the advantages of high ammoxidation reaction selectivity, high product yield and simple system operation, is a green and efficient method for preparing the aromatic nitrile compound, and is beneficial to industrial production.
- -
-
Paragraph 0052-0053
(2021/06/12)
-
- Cu2O-Catalyzed Conversion of Benzyl Alcohols Into Aromatic Nitriles via the Complete Cleavage of the C≡N Triple Bond in the Cyanide Anion
-
Nitrogen transfer from cyanide anion to an aldehyde is emerging as a promising method for the synthesis of aromatic nitriles. However, this method still suffers from a disadvantage that a use of stoichiometric Cu(II) or Cu(I) salts is required to enable the reaction. As we report herein, we overcame this drawback and developed a catalytic method for nitrogen transfer from cyanide anion to an alcohol via the complete cleavage of the C≡N triple bond using phen/Cu2O as the catalyst. The present condition allowed a series of benzyl alcohols to be smoothly converted into aromatic nitriles in moderate to high yields. In addition, the present method could be extended to the conversion of cinnamic alcohol to 3-phenylacrylonitrile.
- Liu, Wenbo,Tang, Peichen,Zheng, Yi,Ren, Yun-Lai,Tian, Xinzhe,An, Wankai,Zheng, Xianfu,Guo, Yinggang,Shen, Zhenpeng
-
p. 3509 - 3513
(2021/10/04)
-
- An easily fabricated palladium nanocatalyst on magnetic biochar for Suzuki-Miyaura and aryl halide cyanation reactions
-
Biochar is a carbon-rich solid, the surface of which is covered with a high density of functional carbonyl, hydroxyl and carboxylic acid groups. In this work, palladium nanoparticles were embedded on magnetic biochar and a new reusable and environmentally-friendly catalyst was developed and applied for the promotion of Suzuki-Miyaura C-C coupling and cyanation reactions. The high-carbon (77%), low-ash content (5.8%) and the relatively high surface area (266 m2g?1) of pine tree biochar (PTB) suggested that it might be highly suitable as a catalyst substrate. The Fe3O4-Pd-biochar nanocomposite was successfully characterized using SEM, TEM, EDX, FT-IR, BET and XRD. Its catalytic role was initially evaluated usingp-NO2C6H4I as a model reactant (for both types of reactions) and later for the production of biaryls and benzonitriles from a wide range of aryl halides under mild reaction conditions. Biaryls and benzonitriles were characterized using GC-MS. In the case of the Suzuki-Miyaura reaction, the optimum yield of 98% was obtained with a catalyst concentration of 0.04 mol%, microwave irradiation of 400 W, and a residence time of 5 min, using K2CO3as the base. With respect to the cyanation reaction, dimethylformamide, Na2CO3and 6 h were the optimum solvent, base and reaction duration, respectively. Subsequently, the nanocatalyst showed excellent catalytic activity in both reactions, achieving >88% yields in most cases, regardless of the aryl iodide or bromide used and the type of substitution.
- Akay, Sema,Baran, Talat,Kalderis, Dimitrios,Kayan, Berkant,Tsubota, Toshiki,Turun?, Ersan
-
p. 12519 - 12527
(2021/07/25)
-
- CuO-catalyzed conversion of arylacetic acids into aromatic nitriles with K4Fe(CN)6 as the nitrogen source
-
Readily available CuO was demonstrated to be effective as the catalyst for the conversion of arylacetic acids to aromatic nitriles with non-toxic and inexpensive K4Fe(CN)6 as the nitrogen source via the complete cleavage of the C[tbnd]N triple bond. The present method allowed a series of arylacetic acids including phenylacetic acids, naphthaleneacetic acids, 2-thiopheneacetic acid and 2-furanacetic acid to be converted into the targeted products in low to high yields.
- Ren, Yun-Lai,Shen, Zhenpeng,Tian, Xinzhe,Xing, Ai-Ping,Zhao, Zhe
-
-
- Pd/CoFe2O4/chitosan: A highly effective and easily recoverable hybrid nanocatalyst for synthesis of benzonitriles and reduction of 2-nitroaniline
-
In this study, a novel catalyst system with high activity and easy recoverability was successfully prepared through the deposition of Pd nanoparticles (NPs) onto designed sustainable hybrid beads containing magnetic cobalt ferrite and chitosan (Pd/CoFe2O4/chitosan). The catalytic potential of Pd/CoFe2O4/chitosan hybrid nanocatalyst was then assessed in i) preparation of benzonitriles via aryl halides cyanation and ii) reduction of 2-nitroaniline (2-NA). Various aryl iodides and bromides were successfully cyanated by Pd/CoFe2O4/chitosan hybrid nanocatalyst with excellent reaction yields within 3 h. In addition to the production of benzonitriles, the hybrid nanocatalyst showed excellent activity by reducing 2-NA in 65 s. It was proved that the Pd/CoFe2O4/chitosan hybrid nanocatalyst outperformed many catalysts used in the cyanation of aryl halides and catalytic reduction of 2-NA previously reported in the literature. Moreover, it was found that the designed Pd/CoFe2O4/chitosan hybrid nanocatalyst was easily and effectively separated from the reaction mixture using an external magnet and reused several times in catalytic reactions without considerable loss of catalytic activity.
- Baran, Talat,Nasrollahzadeh, Mahmoud
-
-
- Pd@CeO2-catalyzed cyanation of aryl iodides with K4Fe(CN)6·3H2O under visible light irradiation
-
Cyanation of aryl iodides is still challenging work for chemical researchers because of harsh reaction conditions and toxic cyanide sources. Herein, we have developed a new protocol based on the combination of the catalyst Pd@CeO2, nontoxic cyanide source K4[Fe (CN)6]·3H2O, and driving force visible light irradiation. The reaction is operated at relatively moderate temperature (55°C) and exhibits good catalytic efficiency of product aryl nitriles (yields of 89.4%). Moreover, the catalyst Pd@CeO2 possesses good reusability with a slight loss of photocatalytic activity after five consecutive runs. The reaction system based on the above combination shows a wide range of functional group tolerance under the same conditions. Reaction conditions such as temperature, time, the component of catalyst, and solutions are optimized by studying cyanation of 1-iodo-4-nitrobenzene as model reaction. According to these results, the possible mechanism of Pd@CeO2-catalyzed cyanation of aryl iodides under visible light irradiation is proposed based on the influence of visible light on the catalyst and reactant compounds. In all, we provided an environmental and economic method for preparation of aryl nitriles from cyanation of aryl iodides based on the goal of green chemistry for sustainable development.
- Wang, Shengyu,Wang, Jianqiang,Pan, Junyi,Liu, Cheng,Gong, Xubin,Guo, Cheng
-
-
- Revisiting the synthesis of aryl nitriles: a pivotal role of CAN
-
Facilitated by the dual role of Ceric Ammonium Nitrate (CAN), herein we report a cost-effective approach for the cyanation of aryl iodides/bromides with CAN-DMF as an addition to the existing pool of combined cyanation sources. In addition to being an oxidant, CAN acts as a source of nitrogen in our protocol. The reaction is catalyzed by a readily available Cu(ii) salt and the ability of CAN to generate ammonia in the reaction medium is utilized to eliminate the additional requirement of a nitrogen source, ligand, additive or toxic reagents. The mechanistic study suggests an evolution of CN?leading to the synthesis of a variety of aryl nitriles in moderate to good yields. The proposed mechanism is supported by a series of control reactions and labeling experiments.
- Saikia, Rakhee,Park, Kwihwan,Masuda, Hayato,Itoh, Miki,Yamada, Tsuyoshi,Sajiki, Hironao,Mahanta, Sanjeev P.,Thakur, Ashim J.
-
p. 1344 - 1351
(2021/02/27)
-
- Process Development of the Copper(II)-Catalyzed Dehydration of a Chiral Aldoxime and Rational Selection of the Co-Substrate
-
The access towards chiral nitriles remains crucial in the synthesis of several pharmaceuticals. One approach is based on metal-catalyzed dehydration of chiral aldoximes, which are generated from chiral pool-derived aldehydes as substrates, and the use of a cheap and readily available nitrile as co-substrate and water acceptor. Dehydration of N-acyl α-amino aldoximes such as N-Boc-l-prolinal oxime catalyzed by copper(II) acetate provides access to the corresponding N-acyl α-amino nitriles, which are substructures of the pharmaceuticals Vildagliptin and Saxagliptin. In this work, a detailed investigation of the formation of the amide as a by-product at higher substrate loadings is performed. The amide formation depends on the electronic properties of the nitrile co-substrate. We could identify an acceptor nitrile which completely suppressed amide formation at high substrate loadings of 0.5 m even when being used with only 2 equivalents. In detail, utilization of trichloroacetonitrile as such an acceptor nitrile enabled the synthesis of N-Boc-cyanopyrrolidine in a high yield of 92 % and with full retention of the absolute configuration.
- Gr?ger, Harald,Nonnhoff, Jannis
-
-
- Discovery and characterization of a novel perylenephotoreductant for the activation of aryl halides
-
To develop a photocatalyst with catalytical activity for substrates with low reactivities is always highly desired. Herein, based on the principle of structure–property relationships, we rationally designed the natural product cercosporin, the naturally occurring perylenequinonoid pigment, to develop a novel organic perylenephotoreductant, hexacetyl reduced cercosporin (HARCP), through structural manipulation. Compared with cercosporin, HARCP shows prominent electrochemical and photophysical characteristics with greatly improved photoreductive activity, fluorescence lifetime and fluorescence quantum yield. These properties allowed HARCP as a powerful photoreductant to efficiently realize a series of benchmark reactions, including photoreduction, alkoxylation and hydroxylation to construct C–H and C–O bonds using aryl halides as substrates under mild conditions, all of which have never been achieved by the same photocatalyst. Thus, this study well supports the notion that the principle between structural manipulation and photocatalytic activity is of great significance to design customized photocatalysts for photoredox chemistry.
- Guo, Baodang,Huang, Shuping,Li, Jia,Li, Min,Liu, Xuanzhong,Rao, Yijian,Wu, Yawen,Yin, Huimin,Yuan, Zhenbo,Zhang, Yan
-
p. 111 - 120
(2021/06/16)
-
- Iodine Promoted Conversion of Esters to Nitriles and Ketones under Metal-Free Conditions
-
We report a novel strategy to prepare valuable nitriles and ketones through the conversion of esters under metal-free conditions. By using the I2/PCl3 system, various substrates including aliphatic and aromatic esters could react with acetonitrile and arenes to afford the desired products in good to excellent yields. This method is compatible with a number of functional groups and provides a simple and practical approach for the synthesis of nitrile compounds and aryl ketones.
- Xiao, Jing,Guo, Fengzhe,Li, Yinfeng,Li, Fangshao,Li, Qiang,Tang, Zi-Long
-
p. 2028 - 2035
(2021/02/03)
-
- Development and Molecular Understanding of a Pd-Catalyzed Cyanation of Aryl Boronic Acids Enabled by High-Throughput Experimentation and Data Analysis
-
A synthetic method for the palladium-catalyzed cyanation of aryl boronic acids using bench stable and non-toxic N-cyanosuccinimide has been developed. High-throughput experimentation facilitated the screen of 90 different ligands and the resultant statistical data analysis identified that ligand σ-donation, π-acidity and sterics are key drivers that govern yield. Categorization into three ligand groups – monophosphines, bisphosphines and miscellaneous – was performed before the analysis. For the monophosphines, the yield of the reaction increases for strong σ-donating, weak π-accepting ligands, with flexible pendant substituents. For the bisphosphines, the yield predominantly correlates with ligand lability. The applicability of the designed reaction to a wider substrate scope was investigated, showing good functional group tolerance in particular with boronic acids bearing electron-withdrawing substituents. This work outlines the development of a novel reaction, coupled with a fast and efficient workflow to gain understanding of the optimal ligand properties for the design of improved palladium cross-coupling catalysts.
- De Jesus Silva, Jordan,Bartalucci, Niccolò,Jelier, Benson,Grosslight, Samantha,Gensch, Tobias,Schünemann, Claas,Müller, Bernd,Kamer, Paul C. J.,Copéret, Christophe,Sigman, Matthew S.,Togni, Antonio
-
-
- Nickel-Catalyzed Cyanation of Aryl Thioethers
-
A nickel-catalyzed cyanation of aryl thioethers using Zn(CN)2 as a cyanide source has been developed to access functionalized aryl nitriles. The ligand dcype (1,2-bis(dicyclohexylphosphino)ethane) in combination with the base KOAc (potassium acetate) is essential for achieving this transformation efficiently. This reaction involves both a C-S bond activation and a C-C bond formation. The scalability, low catalyst and reagents loadings, and high functional group tolerance have enabled both late-stage derivatization and polymer recycling, demonstrating the reaction's utility across organic chemistry.
- Delcaillau, Tristan,Woenckhaus-Alvarez, Adrian,Morandi, Bill
-
supporting information
p. 7018 - 7022
(2021/09/13)
-
- An overview on the progress and development on the palladium catalyzed direct cyanation
-
Generation of the positive CN ion and the corresponding direct cyanation are both extremely important for cyanation of aromatic compounds. Hereby, we would like to report the simultaneous use of the new Pd nano-catalyst as well as the three types of the N-arylsulfonyl cyanamides (A, B and C) as potent reagents for the in situ generation of the positive CN ion for the direct cyanation of phenylboronic acids in acetonitrile at reflux conditions.
- Heydari, Somayyeh,Habibi, Davood,Reza Faraji, Ali,keypour, Hassan,Mahmoudabadi, Masoumeh
-
-
- Decarbonylative Synthesis of Aryl Nitriles from Aromatic Esters and Organocyanides by a Nickel Catalyst
-
A decarbonylative cyanation of aromatic esters with aminoacetonitriles in the presence of a nickel catalyst was developed. The key to this reaction was the use of a thiophene-based diphosphine ligand, dcypt, permitting the synthesis of aryl nitrile without the generation of stoichiometric metal- or halogen-containing chemical wastes. A wide range of aromatic esters, including hetarenes and pharmaceutical molecules, can be converted into aryl nitriles.
- Iizumi, Keiichiro,Kurosawa, Miki B.,Isshiki, Ryota,Muto, Kei,Yamaguchi, Junichiro
-
supporting information
p. 1555 - 1559
(2020/11/10)
-
- Copper-promoted cyanation of aryl iodides with N,N-dimethyl aminomalononitrile
-
A copper-promoted cyanation of aryl iodides has been successfully developed by using N,N-dimethyl aminomalononitrile as the cyanide source with moderate toxicity and better stability. This reaction features broad substrate scope, excellent reaction yields, readily available catalyst, and simple reaction conditions.
- Liu, Si-Zhan,Li, Jing,Xue, Cao-Gen,Xu, Xue-Tao,Lei, Lin-Sheng,Huo, Chen-Yu,Wang, Zhen,Wang, Shao-Hua
-
supporting information
(2021/02/01)
-
- Nickel-Catalyzed Reversible Functional Group Metathesis between Aryl Nitriles and Aryl Thioethers
-
We describe a new functional group metathesis between aryl nitriles and aryl thioethers. The catalytic system nickel/dcype is essential to achieve this fully reversible transformation in good to excellent yields. Furthermore, the cyanide- and thiol-free reaction shows high functional group tolerance and great efficiency for the late-stage derivatization of commercial molecules. Finally, synthetic applications demonstrate its versatility and utility in multistep synthesis.
- Delcaillau, Tristan,Boehm, Philip,Morandi, Bill
-
supporting information
p. 3723 - 3728
(2021/04/07)
-
- Imidazole hydrochloride promoted synthesis of 3,5-disubstituted-1,2,4-oxadiazoles
-
Imidazole hydrochloride as an additive promotes the reaction of amidoximes and DMA derivatives to generated 3,5-disubstituted-1,2,4-oxadiazoles in low to excellent yields without the use of coupling reagents, oxidants, strong acids or bases and other additives.
- Wang, Xuetong,Wang, Yin,Liu, Xiaoling,He, Tingshu,Li, Lingli,Wu, Huili,Zhou, Shangjun,Li, Dan,Liao, Siwei,Xu, Ping,Huang, Xing,Yuan, Jianyong
-
-
- Copper-Catalyzed Methoxylation of Aryl Bromides with 9-BBN-OMe
-
A Cu-catalyzed cross-coupling reaction between aryl bromides and 9-BBN-OMe to provide aryl methyl ethers under mild conditions is reported. The oxalamide ligand BHMPO plays a key role in the transformation. Various functional groups on bromobenzenes are well tolerated, providing the desired anisole products in moderate to high yields.
- Li, Chen,Song, Zhi-Qiang,Wang, Dong-Hui,Wang, Jing-Ru
-
supporting information
p. 8450 - 8454
(2021/11/17)
-
- Method for preparing anisonitrile
-
The invention discloses a method for preparing anisonitrile, which comprises the following steps: adding 4-methoxybenzyl chloride and potassium ferrocyanide trihydrate into an organic solvent according to a certain proportion, then adding a copper salt as a catalyst, introducing oxygen to a certain pressure, sealing a reactor, and reacting in oxygen at the reaction temperature of 120-160 DEG C for 10-50 hours to obtain the anisonitrile, according to the scheme, potassium ferrocyanide trihydrate is used as a reaction reagent, so that the production cost is low, toxic reagents are not used, and environmental pollution is avoided.
- -
-
Paragraph 0029-0049
(2021/12/07)
-
- Lewis acid promoted dehydration of amides to nitriles catalyzed by [PSiP]-pincer iron hydrides
-
The dehydration of primary amides to their corresponding nitriles using four [PSiP]-pincer hydrido iron complexes 1–4 [(2-Ph2PC6H4)2MeSiFe(H)(PMe3)2 (1), (2-Ph2PC6H4)2HSiFe(H)(PMe3)2 (2), (2-(iPr)2PC6H4)2HSiFe(H)(PMe3)2 (3) and (2-(iPr)2PC6H4)2MeSiFe(H)(PMe3)2 (4)] as catalysts in the presence of (EtO)3SiH as dehydrating reagent was explored in the good to excellent yields. It was proved for the first time that Lewis acid could significantly promote this catalytic system under milder reaction conditions than other Lewis acid-promoted system, such as shorter reaction time or lower reaction temperature. This is also the first example that dehydration of primary amides to nitriles was catalyzed by silyl hydrido iron complexes bearing [PSiP]-pincer ligands with Lewis acid as additive. This catalytic system has good tolerance for many substituents. Among the four iron hydrides 1 is the best catalyst. The effects of substituents of the [PSiP]-pincer ligands on the catalytic activity of the iron hydrides were discussed. A catalytic reaction mechanism was proposed. Complex 4 is a new iron complex and was fully characterized. The molecular structure of 4 was determined by single crystal X-ray diffraction.
- Chang, Guoliang,Li, Xiaoyan,Zhang, Peng,Yang, Wenjing,Li, Kai,Wang, Yajie,Sun, Hongjian,Fuhr, Olaf,Fenske, Dieter
-
-
- An Air-Stable N-Heterocyclic [PSiP] Pincer Iron Hydride and an Analogous Nitrogen Iron Hydride: Synthesis and Catalytic Dehydration of Primary Amides to Nitriles
-
An air-stable N-heterocyclic PSiP pincer iron hydride FeH(PMe3)2(SiPh(NCH2PPh2)2C6H4) (4) was synthesized by Si-H activation of a Ph-substituted [PSiP] pincer ligand. The analogous strong electron-donating iPr-substituted [PSiP] pincer ligand was prepared and introduced into iron complex to give an iron nitrogen complex FeH(N2)(PMe3)(SiPh(NCH2PiPr2)2C6H4) (6). Both 4 and 6 showed similar high efficiency for catalytic dehydration of primary amides to nitriles. Air-stable iron hydride 4 was the best catalyst for its stabilization and convenient preparation. A diverse range of cyano compounds including aromatic and aliphatic species was obtained in moderate to excellent yields. A plausible catalytic reaction mechanism was proposed.
- Fenske, Dieter,Fuhr, Olaf,Li, Xiaoyan,Sun, Hongjian,Wang, Yajie,Xie, Shangqing,Zhang, Hua
-
-
- NHC-catalyzed silylative dehydration of primary amides to nitriles at room temperature
-
Herein we report an abnormal N-heterocyclic carbene catalyzed dehydration of primary amides in the presence of a silane. This process bypasses the energy demanding 1,2-siloxane elimination step usually required for metal/silane catalyzed reactions. A detailed mechanistic cycle of this process has been proposed based on experimental evidence along with computational study.
- Ahmed, Jasimuddin,Hota, Pradip Kumar,Maji, Subir,Mandal, Swadhin K.,Rajendran, N. M.
-
supporting information
p. 575 - 578
(2020/01/29)
-