Specification of Flat Plate Blister Packing Machine

1. Characteristic:
1). The material is fed automatically. The mould and feeding equipment can be designed as user’s requirements.
2). Travel scope can be adjusted. Mould is located by located groove so that it’s easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.
3). The equipment of trace pressing, batch number printing and scrap-collecting can be chose.
4). The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.
5). Manipulator grip and tow wrapper, straight to-and-fro running, synchronize accurately and stably.
6). Speed is shifted by step-less transducer; the operation panel of PC cycle (can be Adopt interface of human-machine).

2. Main Technical Parameter:
Cutting Frequency (times/min): 8-35
Capacity(strip/h): 600-2100
Max shaping areas and depth (mm): 110*60*155
Stroke (mm): 20-70(can be manufactured as user's requirements)
Standard Sheet (mm): 80*57 (canbe manufactured as user's requirements)
Air Pressure(Mpa): 0.4-0.6
Total power: 380V/220V 50Hz/60Hz 1.8kw
main motor power: 0.55
PVC hard pieces (mm): 0.15-0.5*80
PTP Foil(mm): 0.02-0.035*80
Dialysis Paper(mm): 50-100g*80
Overall Dimensions(mm): 1560*460*890
Weight (kg): 380