10.1002/adsc.202000483
Advanced Synthesis & Catalysis
In conclusion, our results presented here provide
References
an expeditious route to N–H NHC complexes of
palladium that are highly active precatalysts for
Suzuki-Miyaura and Sonogashira cross-coupling
reactions. Under optimized conditions, catalyst
turnover numbers over 100,000 are achieved while
maintaining high yields of product. In addition, our
computational studies provide insight into the
donating ability of these unique carbene structures,
which surpasses that of traditional NHCs. These
results complement previous work with anionic
imidazolyl palladium catalysts for cross-couplings[4]
and provide useful insights to the potential utility of
this class of ligands for transition metal catalysis. Our
continuing studies on this powerful class of NHC
ligands is focused on the application to other transition
metals including nickel.
[1] (a) W. A. Herrmann, Angew. Chem. Int Ed. 2002, 41,
1290–1309. (b) R. H. Crabtree, Oil Gas Sci. Technol.
2007, 62, 739–744. (c) F. E. Hahn, M. C. Jahnke, Angew.
Chem. Int. Ed. 2008, 47, 3122–3172. (d) K. Öfele, C.
Taubmann, W. A. Herrmann, Chem. Rev. 2009, 109,
3408–3444. (e) S. Díez-González, N. Marion, S. P.
Nolan, Chem. Rev. 2009, 109, 3612–3676. (f) E. Peris,
Chem. Rev. 2018, 118, 9988–10031.
[2] (a) S. Kuwata, F. E. Hahn, Chem. Rev. 2018, 118, 9642–
9677. (b) M. C. Jahnke, F. E. Hahn, Coord. Chem. Rev.
2015, 293–294, 95–115. (c) F. E. Hahn, ChemCatChem
2013, 5, 419–430. (d) S. Kuwata, T. Ikariya, Chem Eur.
J. 2011, 17, 3542–3556. (e) S. Kuwata, T. Ikariya, Chem.
Commun. 2014, 50, 14290–14300.
[3] M. Y. Leow, C. C. Ho, M. G. Gardiner, A. C. Bissember,
Catalysts 2018, 8, 620–640.
[4] J. Zhu, V. N. G. Lindsay, ACS Catal. 2019, 9, 6993–
Experimental Section
6998.
[5] For leading references, see: (a) Y. Ito, T. Hirao, K.
Tsubata, T. Saegusa, Tetrahedron Lett. 1978, 19, 1535–
1538. (b) R. A. Michelin, L. Zanotto, D. Braga, P.
Sabatino, R. J. Angelici, Inorg. Chem. 1988, 27, 93–99.
(c) J. Ruiz, B. F. Perandones, G. García, M. E. G.
Mosquera, Organometallics 2007, 26, 5687–5695.
General procedure for the synthesis of palladium
catalysts. In a glove box, the phosphinoimidazole ligand
(1a-1d, 0.100 mmol, 1 eq.) and palladium(II) chloride (17.7
mg, 0.100 mmol, 1 eq.) were dissolved in methanol (0.17
mL) and the mixture was stirred for 7-72 hours. The solvent
wsa then removed under vacuum and the resulting product
was dissolved in CH2Cl2 and passed through a silica gel
plug. The solvent was then removed to provide the clean
product.
[6] For leading references, see: (a) T. Kꢀsterke, T. Pape, F.
E. Hahn, J. Am. Chem. Soc. 2011, 133, 2112−2115. (b)
R. Das, C. G. Daniliuc, F. E. Hahn, Angew. Chem. Int.
Ed. 2014, 53, 1163−1166.
General procedure for Suzuki-Miyaura coupling. In a
N2-filled glovebox, complex 2a (0.67 mg, 0.0011 mmol),
cesium carbonate (702 mg, 2.15 mmol), aryl halide (1.08
mmol), add boronic acid (1.62 mmol) were dissolved in
toluene/methanol (95/5, 1.4 mL). The solution was then
heated to 100 °C for 2-24 h until complete consumption of
[7] For leading references, see: (a) K. L. Tan, R. G. Bergman,
J. A. Ellman, J. Am. Chem. Soc. 2002, 124, 3202–3203.
(b) K. Araki, S. Kuwata, T. Ikariya, Organometallics
2008, 27, 2176–2178. (c) V. Miranda-Soto, D. B.
Grotjahn, A. G. DiPasquale, A. L. Rheingold, J. Am.
Chem. Soc. 2008, 130, 13200–13201. (d) F. He, M.
Wesolek, A. A. Danopoulos, P. Braunstein, Chem.-Eur.
J. 2016, 22, 2658–2671. (e) D. C. Marelius, E. H.
Darrow, C. E. Moore, J. A. Golen, A. L. Rheingold, D.
B. Grotjahn, Chem. - Eur. J. 2015, 21, 10988−10992.
1
starting material was observed by H NMR. The reaction
was then cooled to room temperature. Water was added and
the mixture was extracted 3 times with dichloromethane.
The combined organic layers were dried with sodium sulfate
and the solvent removed. Purification was accomplished on
a silica gel column with 1:1 hexane:DCM as eluent.
General procedure for Sonogashira coupling. In a N2-
filled glovebox, complex 2a (3.0 mg, 0.0048 mmol),
cesium carbonate (628 mg, 1.93 mmol), aryl iodide (0.965
mmol), and phenylacetylene (120.7 mg, 1.16 mmol) were
dissolved in toluene/methanol solution (95/5. 1.9 mL). The
reaction was then stirred at 40 °C for 16-24 h until complete
consumption of starting material was observed by 1H NMR.
The reaction was then cooled to room temperature. Water
was added and the mixture was extracted 3 times with
diethyl ether. The combined organic layers were dried with
sodium sulfate and the solvent removed. Purification was
accomplished on a silica gel column with cyclohexane as
eluent.
[8] (a) Y.-C. Chang, C.-H. Chang, L.-W. Wang, Y.-H. Liang,
D.-F. Hu, C.-M. Weng, K.-C. Mao, F.-E. Hong,
Polyhedron 2015, 100, 382–391. (b) I. Abdellah, C.
Lepetit, Y. Canac, C. Duhayon, R. Chauvin, Chem Eur.
J. 2010, 16, 13095–13108.
[9] P. W. N. M. Leeuwen, Applied Catal. A: General 2001,
212, 61–81.
[10] V. Miranda-Soto, D. B. Grotjahn, A. L. Cooksy, J. A.
Golen, C. E. Moore, A. L. Rheingold, Angew. Chem. Int.
Ed. 2011, 50, 631–635.
Acknowledgements
Acknowledgement is made to the donors of the American Chemical
Society Petroleum Research Fund for support of this research
(PRF No. 56371-DNI1). Financial support was also provided by
the National Science Foundation (CHE-1665015). D.H.E.
acknowledges the National Science Foundation Chemical
Catalysis Program for support (CHE-1764194).
[11] For leading references, see: (a) C. Amatore, A. Jutand,
Acc. Chem. Res. 2000, 33, 314–321. (b) F. Schroeter, J.
Soellner, T. Strassner, ACS Catal. 2017, 7, 3004–3009.
[12] Gaussian 16, Revision B.01, M. J. Frisch, G. W. Trucks,
H. B. Schlegel, G. E. Scuseria, M. A. Robb, J. R.
Cheeseman, G. Scalmani, V. Barone, G. A. Petersson, H.
1
This article is protected by copyright. All rights reserved.