1
0,29
procedure,
and followed by end-capping with bromoben-
References
zene. The polymer, which was purified by extraction of
low-molecular fractions with acetone, and re-precipitation of
the chloroform solution of the high-molecular-weight fraction
1
2
J. Bharathan and Y. Yang, Appl. Phys. Lett., 1998, 72, 2660.
Y. Cao, I. D. Parker, G. Yu, C. Zhang and A. J. Heeger, Nature,
1999, 397, 414.
3 J. H. Ahn, C. Wang, C. Pearson, M. R. Bryce and M. C. Petty,
2
1
into methanol, had M
w
= 48 700 g mol and polydispersity
Appl. Phys. Lett., 2004, 85, 1283.
index M /M = 1.52. The electron transporting material, DFD
w
n
4
S. Oyston, C. Wang, G. Hughes, A. S. Batsanov, I. F. Perepichka,
M. R. Bryce, J. H. Ahn, C. Pearson and M. C. Petty, J. Mater.
Chem., 2005, 15, 194.
3
,4
was synthesised in Durham. The synthesis and characterisa-
tion of PFOPh is provided as electronic supplementary
information.{
5 S. Oyston, C. Wang, I. F. Perepichka, A. S. Batsanov, M. R. Bryce,
J. H. Ahn and M. C. Petty, J. Mater. Chem., 2005, 15, 5164.
6
7
U. Scherf and E. J. W. List, Adv. Mater., 2002, 14, 477.
T. Miteva, A. Meisel, W. Knoll, H. G. Nothofer, U. Scherf,
D. C. M u¨ ller, K. Meerholz, A. Yasuda and D. Neher, Adv. Mater.,
Device fabrication and testing
Indium tin oxide (ITO) coated glass from Merck with a sheet
2
2
001, 13, 565.
1
resistance of 9 V % was used as the anode. This was cleaned
by ultrasonification in acetone and isopropyl alcohol, for
8
9
D. F. Perepichka, I. F. Perepichka, H. Meng and F. Wudl, in
Organic Light-Emitting Materials and Devices, ed. Z. R. Li and
H. Meng, CRC Press, Boca Raton, FL, 2006, ch. 2, pp. 45–293.
J. Y. Li, A. Ziegler and G. Wegner, Chem.–Eur. J., 2005, 11, 4450.
3
0 min each, and dried in a flow of nitrogen. As a hole
injection layer, poly(3,4-ethylenedioxythiophene) doped with
polystyrene sulfonated acid (PEDOT : PSS, purchased from
Bayer AG) was spin-coated onto the ITO.
1
0 M. Kreyenschmidt, G. Klaerner, T. Fuhrer, J. Ashenhurst, S. Karg,
W. D. Chen, V. Y. Lee, J. C. Scott and R. D. Miller,
Macromolecules, 1998, 31, 1099.
1
1 D. Sainova, T. Miteva, H. G. Nothofer, U. Scherf, I. Glowacki,
J. Ulanski, H. Fujikawa and D. Neher, Appl. Phys. Lett., 2000, 76,
The PEDOT : PSS layer (40 nm in thickness) was annealed
at 100 uC for 1 h in a nitrogen atmosphere to remove any
residual solvent. PFO (or PFOPh) and DFD were dissolved
in chloroform to provide the solutions for spin-coating.
Following the spin-coating of 100 ¡ 10 nm thick films, Ca
1
810.
12 E. J. W. List, R. Guentner, P. S. de Freitas and U. Scherf, Adv.
Mater., 2002, 14, 374.
1
1
1
1
3 X. Gong, P. K. Iyer, D. Moses, G. C. Bazan, A. J. Heeger and
S. S. Xiao, Adv. Funct. Mater., 2003, 13, 325.
4 J. M. Lupton, M. R. Craig and E. W. Meijer, Appl. Phys. Lett.,
2002, 80, 4489.
5 L. Romaner, A. Pogantsch, P. S. de Freitas and U. Scherf, Adv.
Funct. Mater., 2003, 13, 597.
6 M. Gaal, E. J. W. List and U. Scherf, Macromolecules, 2003, 36,
(
40 nm) and Al (100 nm) cathodes, 2 mm diameter, were
2
6
thermally evaporated, sequentially, at a pressure of 10 mbar.
To investigate the effect of oxidation, freshly-prepared spin-
coated films were exposed to air for 5 h under room lighting
(
from a white fluorescent lamp). The photo-oxidised films
4
17 S. Setayesh, A. C. Grimsdale, T. Weil, V. Enkelmann, K. M u¨ llen,
236.
were subsequently transferred to the evaporator to deposit the
metal cathode.
F. Meghdadi, E. J. W. List and G. Leising, J. Am. Chem. Soc.,
001, 123, 946.
2
Electrical measurements were undertaken on unencapsu-
1
1
8 J. H. Lee and D. H. Hwang, Chem. Commun., 2003, 2836.
9 D. H. Hwang, M. J. Park and J. H. Lee, Mater. Sci. Eng., C, 2004,
24, 201.
2
1
lated devices in a vacuum chamber (10 mbar). The dc bias
was applied and the current monitored by a Keithley 2400
source meter. The EL was collected by a large area photodiode
2
0 G. Wyszecki and W. S. Stiles, Color Science, Wiley, New York,
1
st edn, 1967.
(
1.5 cm diameter) connected to a Keithley 485 digital
2
2
1 B. Schultz, M. Bruma and L. Brehmer, Adv. Mater., 1997, 9, 601.
2 J. H. Ahn, C. Wang, N. E. Widdowson, C. Pearson, M. R. Bryce
and M. C. Petty, J. Appl. Phys., 2005, 98, 054508.
picoammeter. For EL efficiency measurements, the light
power was calculated using the photocurrent and the
2
1
2
3 L. S. Liao, M. K. Fung, C. S. Lee, S. T. Lee, M. Inbasekaran,
E. P. Woo and W. W. Wu, Appl. Phys. Lett., 2000, 76, 3582.
4 In estimation of fluorenone HOMO–LUMO energy levels we used
the difference in CV oxidation potentials of fluorenone and PFO
responsivity of the photodiode (ampere watt ). As not all
of the light from the OLED (e.g. scattered light) was collected
by the photodiode, the efficiencies given in this paper should
be considered as lower limits. Electroluminescence spectra
were measured using an Ocean Optics USB2000 miniature
fibre optic spectrometer. For absorption and photolumines-
cence (PL) experiments, the films were spin coated onto glass
substrates and measurements made with a Perkin Elmer
Lambda 19 ultraviolet/visible/near-IR spectrometer and a
Fluoromax-3 spectrometer, respectively.
2
(# +0.65–0.7 V) and optical energy gap of fluorenone from UV-
opt
Vis absorption maximum (E
g
# 3.2 eV): (a) A. Gihaner,
¨
S. Turke and A. M. Onal, J. Electroanal. Chem., 2004, 568, 151; (b)
S. Janietz, D. D. C. Bradley, M. Grell, C. Giebeler, M. Inbasekaran
and E. P. Woo, Appl. Phys. Lett., 1998, 73, 2453; (c) C. Chi, C. Im,
V. Enkelmann, A. Zeigler, G. Lieser and G. Wegner, Chem.–Eur.
J., 2005, 11, 6833.
2
2
2
2
5 W. Yang, J. Huang, C. Liu, Y. Niu, Q. Hou, R. Yang and Y. Cao,
Polymer, 2004, 45, 865.
6 W. Yang, Q. Hou, C. Liu, Y. Niu, J. Huang, R. Yang and Y. Cao,
J. Mater. Chem., 2003, 13, 1351.
7 G. Kl a¨ rner, M. H. Davey, E. D. Chen, J. C. Scott and R. D. Miller,
Adv. Mater., 1998, 13, 993.
8 X. Jiang, S. Liu, H. Ma and A. K.-Y. Jen, Appl. Phys. Lett., 2000,
Acknowledgements
This work was supported by Durham County Council under
the Science and Technology for Business and Enterprise
Programme SP/082.
76, 1813.
29 G. Klaerner and R. D. Miller, Macromolecules, 1998, 31, 2007.
This journal is ß The Royal Society of Chemistry 2007
J. Mater. Chem., 2007, 17, 2996–3001 | 3001