M.-H. Alve`s et al. / C. R. Chimie 13 (2010) 1301–1307
1307
[14] D.E. Putzig, J.R. Moncarz, Titanium Compounds, Organic, 5th ed., The
Kirk-Othmer Encyclopedia of Chemical Technology, 25, J. Wiley, New
York, 2004, p. 71.
3.5. Analysis of titanium leaching
In order to evaluate the catalyst leaching level during
the reaction, the daily reactor production was collected
and analyzed for titanium traces. Leaching during the first
day was important and could be attributed to non-grafted
catalyst incompletely washed from the support. Afterward,
the average daily leaching during the first 32 days can be
estimated to about 9.5 ppm, which corresponds to about
0.1% of the total amount of titanium grafted on the support
engaged in the reaction. Finally, in 42 days of run, the total
titanium leaching was estimated to about 12 mg of Ti that
is, about 7% of the initial amount of grafted titanium
involved.
[15] B. Bolto, J. Gregory, Water Res. 41 (2007) 2301–2324.
[16] E. Antunes, F.A.P. Garcia, P. Ferreira, A. Blanco, C. Negro, M.G. Rasteiro,
Ind. Eng. Chem. Res. 47 (2008) 9370–9375.
[17] Speciality Acrylic and Methacrylic monomers Arkema Brochure;
Puteau, France, 2005.
[18] Y. Chen, S. Liu, G. Wang, X. Feng, Jingxi Huagong 24 (2007) 91–93 CAN
2008:1077145.
[19] P. Jiang, D. Zhang, Q. Li, Y. Lu, Catal. Lett. 110 (2006) 101–106.
[20] J-P. Gendarme, G. Herbst, A. Riondel, FR Patent 2 839 070 (2003), to
ATOFINA.
[21] P. Hurtel, C. Hazan, N. Richard, FR Patent 2 777 561 (1999), to Elf
Atochem S. A.
[22] E. Le Carre, N. Lewis, C. Ribas, A. Wells, Org. Proc. Res. Dev. 4 (2000) 606.
[23] N. Lewis, C. Ribas, A. Wells, Synlett S1 (1999) 957–959.
[24] C. Blandy, J.L. Pellegatta, B. Gilot, J. Catal. 150 (1994) 150–154.
[25] C. Blandy, J.L. Pellegatta, P. Cassoux, Catal. Lett. 43 (1997) 139–142.
[26] M.-C. Gaudino, R. Valentin, D. Brunel, F. Fajula, F. Quignard, A. Riondel,
Appl. Catal. A 280 (2005) 157–164.
4. Conclusions
[27] N.V. Golubko, M.I. Yanovskaya, I.P. Romm, A.N. Ozerin, J. Sol-Gel Sci.
Tech. 20 (2001) 245–262.
We have prepared
a polymer-supported titanium
`
[28] G. Baquey, M.-H. Alves, M. Graullier, A. Riondel, J.-M. Paul, M. Birot, H.
Deleuze, Green Chem. 11 (2009) 868–872.
[29] P. Barbaro, F. Liguori, Chem. Rev. 109 (2009) 515–529.
[30] S. Brunauer, P.H. Emmett, E. Teller, J. Am. Chem. Soc. 60 (1938) 309–
319.
catalyst for application in a transesterification reaction
of industrial interest with the idea to replace a homoge-
neous process. In order to assess the efficiency and stability
[31] E.P. Barrett, L.G. Joyner, P.P. Halenda, J. Am. Chem. Soc. 73 (1951) 373–
380.
[32] A. Fauvel, H. Deleuze, Y. Landais, Eur. J. Org. Chem. 18 (2005) 3900–
3910.
[33] H. Deleuze, X. Schultze, D.C. Sherrington, Polymer 39 (1998) 6109–
6114.
[34] R. Jobert, B. Vuchner, U. S. Patent 3 686 268 (1972), to Ugine Kuhlmann.
[35] H. Deleuze, X. Schultze, D.C. Sherrington, J. Mol. Catal. 159 (2000) 257–
267.
of this catalyst, it was tested in
a laboratory-scale
continuous flow reactor under equilibrium conditions.
The results obtained indicate a good stability to metal
leaching with deactivation being attributed to the slow
alcoholysis of the phenoxy-titanium bond in the long term.
To our knowledge, this result is the best obtained, to date,
concerning the heterogenization of a titanate for catalysis
in transesterification reactions.
[36] H. Ito, IBM J. Res. Dev. 45 (2001) 683–695.
[37] C.J. Simpson, M.J. Fitzhenry, N. Stamford, J. Patrick, Tetrahedron Lett. 46
(2005) 6893–6896.
[38] A. Ben-Bassat, S. Breinig, G.A. Crum, L. Huang, A.L.B. Altenbaugh, A. La
Bonte, N. Rizzo, R.J. Trotman, T. Vannelli, F.S. Sariaslani, S.L. Haynie, Org.
Proc. Res. Dev. 11 (2007) 278–285.
Acknowledgments
[39] H. Deleuze, D.C. Sherrington, J. Chem. Soc. Perkin Trans. 2 (12) (1995)
2217–2221.
[40] A.J. Jose, L.S. Wong, J. Merrington, M. Bradley, Ind. Eng. Chem. Res. 44
(2005) 8659–8662.
This research was strongly supported by the Arkema
Company through Aid-in-Grant funding (to M-H. A).
´
Melanie Bousquet (US2B, Talence, France) is acknowledged
[41] D.C. Bradley, R.C. Mehrotra, D.P. Gaur, Metal Alkoxides, Academic
Press, New York, 1978.
for her gracious Karl-Fisher measurements.
[42] T. Lover, W. Henderson, G.A. Bowmaker, J.M. Seakins, R.P. Cooney, J.
Mat. Sci. 7 (1997) 1553–1558.
References
[43] J.M. Thomas, R. Raja, D.W. Lewis, Angew. Chem. Int. Ed. 44 (2005)
6456–6482.
[1] J. Otera, Chem. Rev. 93 (1993) 1449–1470.
[2] J. Otera, Acc. Chem. Res. 37 (2004) 288–296.
[3] H.E. Hoydonckx, D.E. De Vos, S.A. Chavans, P.A. Jacobs, Top. Catal. 27
(2004) 83–96.
[44] O. Okay, Prog. Polym. Sci. 25 (2000) 711–779.
[45] Y. De Miguel, Structure, Morphology, Physical Formats and Characteri-
sation of Polymer Supports, in : R. Buchmeiser (Ed.), Polymeric Materi-
als in Organic Synthesis and Catalysis 1, Wiley-VCH Weinheim, 2003.
[46] P.J. Dowding, B. Vincent, Coll. Surf., A, Phys. Chem. Eng. Asp. 161 (2000)
259–269.
[47] E.A. Grulke, in : M.F. Mark, N.M. Bikales, C.G. Overberger, G. Menges,
J.I. Kroschwitz (Eds.), 2nd ed., Encyclopedia of Polymer Science and
Engineering, 16, Wiley, New York, 1989, p. 443.
[48] Polymer-Supported Reactions in Organic Synthesis, P. Hodge, D.C.
Sherrington Eds. Wiley, Chichester, 1980, Appendix, 469.
[49] H. Deleuze, X. Schultze, D.C. Sherrington, J. Polym. Sci. Part A Polym.
Chem. 38 (2000) 2879–2886.
[50] S. Deokar, R.S. Ghadage, C.R. Rajan, S. Ponrathnam, J. Appl. Pol. Sci. 91
(2004) 3192–3201.
[51] M. Ochi, H. Furusho, J. Tanaka, Bull. Soc. Chem. Jpn. 67 (1994) 1749–
1752.
[52] J-M. Paul, WO Patent 068 444 (2008), to Arkema France.
[53] B. Benage, B. Geelan, R. Abruscato, WO Patent 40 149 (2001), to
Crompton Corp.
[4] D.J. Brunelle, Polycarbonates, 5th ed., The Kirk-Othmer Encyclopedia of
Chemical Technology, 18, J. Wiley, New York, 2004, p. 2.
[5] X. Yang, X. Ma, S. Wang, J. Gong, AICHe J 54 (2008) 3260–3272.
[6] F. Ma, M.A. Hanna, Bioresour. Technol. 70 (1999) 1–15.
[7] B. Delfort, G. Hillion, D. Le Pennec, C. Lendresse, Eur. Patent 1 593 732
´
(2005), to Institut franc¸ais du petrole.
[8] D. Seebach, E. Hungerbuhler, R. Naef, P. Schnurrenberger, B. Weidmann,
M. Zuger, Synthesis (1982) 138–141.
[9] R. Wilczynski, J.J. Juliette, Methacrylic acid and Derivative, 5th ed., The
Kirk-Othmer Encyclopedia of Chemical Technology, 16, J. Wiley, New
York, 2004, p. 227.
[10] U. Schneider, B. Jousseaume, K. Darriet, T. Toupance, Eur. Patent 1 598
381 (2006), to Crompton GmbH, Chemtura Organometallics GmbH.
[11] B. Pugin, B. Dubuis, A. Muller, US Patent 0 022 731(2002), to Ciba
Specialty Chemicals Holding Inc.
[12] B. Saha, M. Streat, React. Funct. Polym. 40 (1999) 13–27.
[13] A. Riondel, J-P. Gendarme, G. Herbst, FR Patent 2 876 375 (2006), to
Arkema.
[54] S. Lepizzera, FR Patent 12 422 (2000), to ATOFINA.