10.1002/cssc.201702354
ChemSusChem
FULL PAPER
temperature (120, 130 or 140 0C) with an agitation speed of 500 rpm. At
each point of the kinetic curve, a sample from the reactor was taken for
product and glucose quantification. Therefore, each kinetic curve was
done by repeating several times an experiment under a given condition for
various durations.
1688–1696.
[11]
E. A. Pidko, V. Degirmenci, E. J. M. Hensen, ChemCatChem 2012,
4, 1263–1271.
[12]
[13]
G. Yang, E. A. Pidko, E. J. M. Hensen, J. Catal. 2012, 295, 122–132.
X. Qi, M. Watanabe, T. M. Aida, R. L. Smith, Catal. Commun. 2008,
9, 2244–2249.
HPLC analyses were performed using a Waters 1525 chromatograph at
the CTBE/CNPEM equipped with Aminex HPX-87H – Bio-rad capillary
column and Acclaim 120 C18 Dionex column for analysis using refractive
index (RI) and UV detectors. Glucose conversion (X,% mol/mol), product
yield (Y,%mol/mol) and selectivity (S,%mol/mol) were determined
according to the equations:
[14]
[15]
E. F. L. J. Anet, in Adv. Carbohydr. Chem., 1964, pp. 181–218.
C.-H. Kuo, A. S. Poyraz, L. Jin, Y. Meng, L. Pahalagedara, S.-Y. Chen,
D. A. Kriz, C. Guild, A. Gudz, S. L. Suib, Green Chem. 2014, 16, 785.
Y. Yang, C. Hu, M. M. Abu-Omar, J. Mol. Catal. A Chem. 2013, 376,
98–102.
[16]
[17] a) Y. J. Pagán-Torres, T. Wang, J. M. R. Gallo, B. H. Shanks, J. A.
Dumesic, ACS Catal. 2012, 2, 930–934; b) R. Carrasquillo-Flores, M.
Käldström, F. Schüth, J. A. Dumesic, R. Rinaldi, ACS Catal. 2013, 3, 993-997.
퐺푓
푋 = (1 − ) × 100
퐺0
[18]
[19]
[20]
[21]
[22]
[23]
L. Hu, G. Zhao, X. Tang, Z. Wu, J. Xu, L. Lin, S. Liu, Bioresour.
Technol. 2013, 148, 501–507.
#퐶푖 푃
푖
푌 =
푖
× 100
6 퐺0
M. Zhang, K. Su, H. Song, Z. Li, B. Cheng, Catal. Commun. 2015, 69,
76–80.
푌
푖
푆푖 = × 100
T. Wang, Y. J. Pagán-Torres, E. J. Combs, J. A. Dumesic, B. H.
Shanks, Top. Catal. 2012, 55, 657–662.
푋
L. Qi, Y. F. Mui, S. W. Lo, M. Y. Lui, G. R. Akien, I. T. Horváth, ACS
Catal. 2014, 1470–1477.
where G0 (mol/L) denotes the glucose concentration in the feed and Gf
(mol/L) denoting after reaction values. #Ci and Pi are the carbon number
and the concentration of the product i (mol/L) (fructose, HMF, levulinic acid,
etc.), respectively. The standard deviation was calculated, and the
maximum values are given as follows: ± 3% for glucose conversion, ±1%
for HMF yield and finally, ±0.8% for fructose yield.
J. Liu, H. Li, Y.-C. Liu, Y.-M. Lu, J. He, X.-F. Liu, Z.-B. Wu, S. Yang,
Catal. Commun. 2015, 62, 19–23.
L. Atanda, A. Silahua, S. Mukundan, A. Shrotri, G. Torres-Torres, J.
Beltramini, RSC Adv. 2015, 5, 80346–80352.
[24]
[25]
J. Zhang, L. Lin, S. Liu, Energy Fuels 2012, 26, 4560–4567.
L. Atanda, S. Mukundan, A. Shrotri, Q. Ma, J. Beltramini,
ChemCatChem 2015, 7, 781–790.
Acknowledgements
[26]
[27]
K. Nakajima, R. Noma, M. Kitano, M. Hara, J. Phys. Chem. C 2013,
117, 16028–16033.
The authors are grateful to LNLS/CNPEM and CNPq for the financial
support, CTBE/CNPEM for chromatographic analysis of reaction products
and LNNano for the TEM microscope. We would also like to thank
Guilherme. P. Nogueira for the catalyst preparation and reactions. RR
acknowledges the support provided by the ERC Consolidator Grant
(LIGNINFIRST, Project Number: 725762) for this collaborative work.
Luis Augusto Barbosa Cortez, Catalytic Dehydration of C6
Carbohydrates for the Production of Hydroxymethylfurfural (HMF) as
a Versatile Platform Chemical, PhD Thesis, São Paulo, 2010.
E. Nikolla, Y. Román-Leshkov, M. Moliner, M. E. Davis, ACS Catal.
2011, 1, 408–410.
[28]
[29]
[30]
[31]
[32]
K. Nakajima, R. Noma, M. Kitano, M. Hara, J. Mol. Catal. A Chem.
2014, 388–389, 100–105.
Keywords: anatase, water-resistant Lewis acid, hydrothermal
synthesis, citric acid, glucose dehydration, HMF
H. Shintaku, K. Nakajima, M. Kitano, N. Ichikuni, M. Hara, ACS Catal.
2014, 4, 1198–1204.
[1]
[2]
A. A. Rosatella, S. P. Simeonov, R. F. M. Frade, C. A. M. Afonso,
Green Chem. 2011, 13, 754-793.
Y. Li, N. H. Lee, D. S. Hwang, J. S. Song, E. G. Lee, S. J. Kim,
Langmuir 2004, 20, 10838–10844.
I. Jiménez-Morales, J. Santamaría-González, A. Jiménez-López, P.
Maireles-Torres, Fuel 2014, 118, 265–271.
H. Yin, Y. Wada, T. Kitamura, T. Sumida, Y. Hasegawa, S. Yanagida,
J. Mater. Chem. 2001, 12, 378–383.
[3]
[4]
M. J. Climent, A. Corma, S. Iborra, Chem. Rev. 2011, 111, 1072–133.
R. Van Putten, J. C. Van Der Waal, E. De Jong, C. B. Rasrendra, H.
J. Heeres, J. G. De Vries, Chem. Rev., 2013, 113, 1499–1597.
M. Watanabe, Y. Aizawa, T. Iida, R. Nishimura, H. Inomata, Appl.
Catal. A Gen. 2005, 295, 150–156.
[33]
[34]
Y. Liu, C. yan Liu, Z. ying Zhang, Chem. Eng. J. 2008, 138, 596–601.
F. Leroux, P. J. Dewar, M. Intissar, G. Ouvrard, L. F. Nazar, J. Mater.
Chem. 2002, 12, 3245–3253.
[5]
[6]
[7]
[8]
[9]
[10]
[35]
[36]
[37]
[38]
[39]
Z. Y. Wu, G. Ouvrard, P. Gressier, C. R. Natoli, Phys. Rev. B 1997,
55, 10382–10391.
R. Noma, K. Nakajima, K. Kamata, M. Kitano, S. Hayashi, M. Hara,
J. Phys. Chem. C 2015, 117, 16028–16033.
F. Farges, G. E. Brown, J. J. Rehr, Phys. Rev. B 1997, 56, 4,1809-
1819.
S. Dutta, S. De, A. K. Patra, M. Sasidharan, A. Bhaumik, B. Saha,
Appl. Catal. A Gen. 2011, 409–410, 133–139.
M. Kitano, K. Nakajima, J. N. Kondo, S. Hayashi, M. Hara, J. Am.
Chem. Soc. 2010, 132, 6622–6623.
R. L. de Souza, H. Yu, F. Rataboul, N. Essayem, Challenges 2012,
3, 212–232.
K. Nakajima, Y. Baba, R. Noma, M. Kitano, J. Kondo, S. Hayashi, M.
Hara, J. Am. Chem. Soc. 2011, 133, 4224–4227.
L. Atanda, A. Shrotri, S. Mukundan, Q. Ma, M. Konarova, J. Beltramini,
ChemSusChem 2015, 8, 2907–2916.
A. Chareonlimkun, V. Champreda, A. Shotipruk, N. Laosiripojana,
Bioresour. Technol. 2010, 101, 4179–86.
G. Yang, E. A. Pidko, E. J. M. Hensen, ChemSusChem 2013, 6,
8
This article is protected by copyright. All rights reserved.