2
584
Journal of the American Ceramic Society—Li et al.
Acknowledgments
Vol. 94, No. 8
The authors would like to acknowledge the financial support by Natural
Science and Engineering Council of Canada and Nova Chemicals Limited.
References
1
Z. Zeng, K. Natesan, Z. Cai, and S. B. Darling, ‘‘The Role of Metal Nano-
particles and Nanonetworks in Alloy Degradation,’’ Nat. Mater., 7, 641–6 (2008).
2
K. M. Sundaram and G. F. Froment, ‘‘Kinetics of Coke Deposition in the
Thermal Cracking of Propane,’’ Chem. Eng. Sci., 34, 635–44 (1979).
3
K. M. Sundaram, P. S. Van Damme, and G. F. Froment, ‘‘Coke Deposition in
the Thermal Cracking of Ethane,’’ AIChE J., 27 [6] 946–51 (1981).
G. L. Swales , ‘‘High Temperature Corrosion Problems in the Petroleum Re-
4
fining and Petrochemical Industries’’; Presented at International Conference on the
Behaviour of High Temperature Alloys in Aggressive Environments, October 15–18,
Petten(NH), Netherland, 1979.
5
C. Steurbaut, H. J. Grabbke, D. Stobbe, van Buren, S. J. Korf, and
J. Defrancq, ‘‘Kinetic Studies of Coke Formation and Removal on HP40 in
Cycled Atmospheres at High Temperatures,’’ Mater. Corros., 49, 352–9 (1998).
I. Wolf, H. J. Grabke, and P. Schmidt, ‘‘Carbon Transport through Oxide
6
Scales on Fe–Cr Alloys,’’ Oxid. Met., 29, 289–306 (1988).
A. Schnaas and H. J. Grabke, ‘‘High-Temperature Corrosion and Creep of
7
Ni–Cr–Fe Alloys in Carburizing and Oxidizing Environments,’’ Oxid. Met., 12 [5]
3
87–403 (1978).
P. Y. Hou and J. Stringer, ‘‘The Effect of Reactive Element Additions on the
8
Selective Oxidation, Growth and Adhesion of Chromia Scales,’’ Mater. Sci. Eng.
A-Struct., 202, 1–10 (1995).
A. Rahmel, H. J. Grabke, and W. Steinkusch, ‘‘Carburization—Introductory
9
Fig. 13. Schematic illustration showing various steps leading to the
graphite growth on Cr 15% CeO sample: (a) initial mixture of
Cr and CeO particles; (b) the formation of Cr networks and
CeCrO ; (c) CeCrO particles are decomposed to CeO and small
chromium carbide particles; (d) formation of continuous layer of carbon
on the surface of bulk Cr with scattered catalytic particles of
chromium carbide and Cr -confined carbon nanotube.
2
O
3
2
Survey,’’ Mater. Corros., 49, 221–5 (1998).
10
O
2 3
2
C
3 2
2 4 2 3
H. Li and W. Chen, ‘‘Stability of MnCr O Spinel and Cr O in High Tem-
perature Carbonaceous Environments with Varied Oxygen Partial Pressures,’’
Corros. Sci., 52, 2481–8 (2010).
3
3
2
11
J. Zhang and D. J. Young, ‘‘Coking and Dusting of Fe–Ni Alloys in CO–H
2
–
3 2
C
H
12
2
O Gas Mixtures,’’ Oxid. Met., 78, 189–211 (2008).
3
C
2
M. Seiersten, C. Simon, and K. Osvold, ‘‘The Effect of Pre-Oxidation with
Ceria on the Carburization of Incoloy 800 HT,’’ Mater. Sci. Forum, 251–254, 559–
6 (1997).
6
13
The newly crystallized nuclei of Cr C might be in the transi-
3
Z. X. Yuan, Z. S. Yu, P. Tan, and S. H. Song, ‘‘Effect of Rare Earths on the
Carburization of Steel,’’ Mater. Sci. Eng. A-Struct., 267, 162–6 (1999).
2
tional state with high surface energy, and the dangling bonds and
unstable facets at the surface could be beneficial for carbon nu-
cleation and growth. This catalytic mechanism found in this re-
search could be separately categorized from the intrinsic catalytic
1
4
H. Liu and W. Chen, ‘‘CeO
of Ni in CO–H –H O,’’ J. Electrochem. Soc., 154 [9] C522–9 (2007).
H. Li, X. Cui, and W. Chen, ‘‘Effect of CeO on High Temperature Car-
2
-Enhanced Coke Formation and Metal Dusting
2
2
15
2
burization Behavior of Mn–Cr–O Spinel and Chromium Oxide,’’ J. Electrochem.
Soc., 157 [10] C321–7 (2010).
P. R. S. Jackson, D. L. Trimm, and D. J. Young, ‘‘The Coking Kinetics of
3
effect of Fe C or Ni nanoparticles on the carbon growth.
16
For industrial application, very minor amount of Ce is
usually added to the chromia-forming alloys to form better
protective chromia scale. Ce is usually segregated to the grain
boundaries of chromia scale, leading to a Ce concentration
much higher than its nominal value. In the carburizing en-
vironments with high oxygen partial pressure, the saturated
CeO2 is beneficial in terms of forming uniform oxide layers
Heat Resistant Austenitic Steels in Hydrogen-Propylene Atmospheres,’’ J. Mater.
Sci., 21, 3125–34 (1986).
H. Li, Y. Zheng, L. W. Benum, M. Oballa, and W. Chen, ‘‘Carburization
17
Behaviour of Mn–Cr–O Spinel in High Temperature Hydrocarbon Cracking En-
vironment,’’ Corros. Sci., 51, 2336–41 (2009).
18
N. V. Skorodumova, S. I. Simak, B. I. Lundqvist, I. A. Abrikosov, and
B. Johansson, ‘‘Quantum Origin of the Oxygen Storage Capability of Ceria,’’
Phys. Rev. Lett., 89 [16] 166601, 4pp (2002).
M. Zinkevich, D. Djurovic, and F. Aldinger, ‘‘Thermodynamic Modelling of
19
against high-temperature corrosion. When CeO
2
is reduced to
Ce in the carburizing environments with low oxygen
the Ceria-Oxygen System,’’ Solid State Ion., 177, 989–1001 (2006).
D. A. Downham and S. B. Shendye, ‘‘Observations of Chromium-Oxide Films
O
2 3
20
partial pressures, the ternary oxide compound (CeCrO ) is
3
Containing Cerium and Yttrium Using Transmission Electron Microscopy,’’
Oxid. Met., 43, 411–33 (1995).
formed, which deteriorates the integrity of protective oxide
scale and enhances coke formation when the ternary oxide
compound is decomposed. These findings are important both
for the design of alloys with better resistance to carbonaceous
degradation, and for the field operating in which the oxygen
partial pressure in the feedstock must be monitored and con-
trolled properly.
21
S . B. Shedye and D. A. Downham, ‘‘Characterization of Ni-25 wt.% Cr
Alloys Containing Reactive Elements and the Oxide Scales Grown on Them at
High Temperatures Using Transmission Electron Microscopy,’’ Oxid. Met., 43,
4
35–57 (1995).
22
M. J. Bennett, ‘‘Carbon Deposition: A Major Technological Problem,’’ Mater.
Corros., 49, 345–51 (1998).
A. J. H. M. Kock, P. K. DE Bokx, E. Boellaard, W. Klop, and J. W. Geus,
23
22
‘
anism,’’ J. Catal., 96, 468–80 (1985).
‘The Formation of Filamentous Carbon on Iron and Nickel Catalysts . Mech-
24
C. M. Chun, J. D. Mumdord, and T. A. Ramanarayanan, ‘‘Metal Dusting
Corrosion of Cobalt,’’ J. Electrochem. Soc., 150 [2] B76–82 (2003).
F. Okuyama and I. Ogasawara, ‘‘Chromium-Containing Metallic Fibres Con-
25
IV. Conclusion
fined within Carbon Nanotubes: Possibility of Template-Mediated Crystal
Growth,’’ Appl. Phys. Lett., 71 [5] 623–5 (1997).
5
wt% CeO
more stable during the initial carburization test because of the
formation of CeCrO . Coke formation with large weight gain
was observed in Cr O 15% CeO after long-term carburizat-
2 2 3
was added into Cr O , which made the sample
26
F. Okuyama, T. Hayashi, and Y. Fujimoto, ‘‘Graphite Lattice Synthesis Cat-
alyzed by Chromium-Containing Crystallites,’’ Appl. Phys. Lett., 74 [24] 3726–8
1999).
3
(
2
3
2
27
B. Chen and P. Wu, ‘‘Aligned Carbon Nanotubes by Catalytic Decomposition
of C over Ni–Cr Alloy,’’ Carbon, 43, 3172–7 (2005).
S. Yang, X. Chen, N. Kikuchi, and S. Motojima, ‘‘Catalytic Effects of Various
Metal Carbides and Ti Compounds for the Growth of Carbon Nanocoils
ion. Based on the analysis of the phase and morphological char-
acteristics of Cr 15% CeO sample during carburization
within 130 h, it was determined that CeCrO is formed and
then decomposes to CeO
ticles; the latter can catalyze the growth of graphitic carbon on
bulk Cr
2 4
H
28
O
2 3
2
3
(
CNCs),’’ Mater. Lett., 62, 1462–5 (2008).
2
and nanosize chromium carbide par-
29
Z. Zeng and K. Natesan, ‘‘Relationship between the Growth of
Carbon Nanofilaments and Metal Dusting Corrosion,’’ Chem. Mater., 17, 3794–
801 (2005). &
3 2
C .