Products Categories
CAS No.: | 19910-65-7 |
---|---|
Name: | Di-sec-butyl peroxydicarbonate |
Molecular Structure: | |
Formula: | C10H18 O6 |
Molecular Weight: | 234.249 |
Synonyms: | Peroxydicarbonicacid, bis(1-methylpropyl) ester (9CI); Peroxydicarbonic acid, di-sec-butylester (8CI); Di-sec-butyl perdicarbonate; Di-sec-butyl peroxydicarbonate;Lupersol 225; Lupersol 225M30; Trigonox SBP |
EINECS: | 243-424-3 |
Density: | 1.094 g/cm3 |
Boiling Point: | 247.9 °C at 760 mmHg |
Flash Point: | 99.4 °C |
Safety: | Moderately toxic by skin contact. See also PEROXIDES, ORGANIC. When heated to decomposition it emits acrid smoke and irritating fumes. |
PSA: | 71.06000 |
LogP: | 2.80480 |
What can I do for you?
Get Best Price
IUPAC Name: Butan-2-yl butan-2-yloxycarbonyloxy carbonate
The MF of Di-sec-butyl peroxydicarbonate (CAS NO.19910-65-7) is C10H18O6.
The MW of Di-sec-butyl peroxydicarbonate (CAS NO.19910-65-7) is 234.24632.
Synonyms of Di-sec-butyl peroxydicarbonate (CAS NO.19910-65-7): 2,2'-[Dioxybis(carbonyloxy)]dibutane ; Bis-sec-butyl peroxydicarbonate
Index of Refraction: 1.43
Density: 1.094 g/ml
Flash Point: 99.4 °C
Boiling Point: 247.9 °C
Di-sec-butyl peroxydicarbonate (CAS NO.19910-65-7) is used as chemical reagent, organic intermediates, fine chemicals, pharmaceutical research and development.
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
rabbit | LD50 | skin | 1200mg/kg (1200mg/kg) | SPI Bulletin. Vol. 1/75-19B, | |
rat | LC | inhalation | > 172ppm/1H (172ppm) | SPI Bulletin. Vol. 1/75-19B, |
Reported in EPA TSCA Inventory.
Moderately toxic by skin contact. See also PEROXIDES, ORGANIC. When heated to decomposition it emits acrid smoke and irritating fumes.Safety information of Di-sec-butyl peroxydicarbonate (CAS NO.19910-65-7):
RIDADR 3115
HazardClass 5.2
PackingGroup II
Di-sec-butyl peroxydicarbonate is sensitive to heat. Storage of Di-sec-butyl peroxydicarbonate must be done so with stringent temperature control measures. It's explosion hazard is also mitigated by mixing the peroxide in a water slurry.