195602-17-6Relevant articles and documents
Functionalizafion of 3,4-ethylenedioxythiophene
Mohanakrishnan,Hucke, Andre,Lyon, Michael A.,Lakshmikantham,Cava, Michael P.
, p. 11745 - 11754 (1999)
Syntheses of 3,4-ethylenedioxythiophene-based vinylenes and oligomers are reported.
Modification of the Poly(bisdodecylquaterthiophene) Structure for High and Predominantly Nonionic Conductivity with Matched Dopants
Li, Hui,Decoster, Mallory E.,Ireland, Robert M.,Song, Jian,Hopkins, Patrick E.,Katz, Howard E.
, p. 11149 - 11157 (2017)
Four p-type polymers were synthesized by modifying poly(bisdodecylquaterthiophene) (PQT12) to increase oxidizability by p-dopants. A sulfur atom is inserted between the thiophene rings and dodecyl chains, and/or 3,4-ethylenedioxy groups are appended to thiophene rings of PQT12. Doped with NOBF4, PQTS12 (with sulfur in side chains) shows a conductivity of 350 S cm-1, the highest reported nonionic conductivity among films made from dopant-polymer solutions. Doped with tetrafluorotetracyanoquinodimethane (F4TCNQ), PDTDE12 (with 3,4-ethylenedioxy groups on thiophene rings) shows a conductivity of 140 S cm-1. The converse combinations of polymer and dopant and formulations using a polymer with both the sulfur and ethylenedioxy modifications showed lower conductivities. The conductivities are stable in air without extrinsic ion contributions associated with PEDOT:PSS that cannot support sustained current or thermoelectric voltage. Efficient charge transfer, tighter ?€-?€ stacking, and strong intermolecular coupling are responsible for the conductivity. Values of nontransient Seebeck coefficient and conductivity agree with empirical modeling for materials with these levels of pure hole conductivity; the power factor compares favorably with prior p-type polymers made by the alternative process of immersion of polymer films into dopant solutions. Models and conductivities point to significant mobility increases induced by dopants on the order of 1-5 cm2 V-1 s-1, supported by field-effect transistor studies of slightly doped samples. The thermal conductivities were in the range of 0.2-0.5 W m-1 K-1, typical for conductive polymers. The results point to further enhancements that could be obtained by increasing doped polymer mobilities.
Strong π-electron donors based on a self-rigidified 2,2′-bi(3,4-ethylenedioxy)thiophene-tetrathiafulvalene hybrid π-conjugated system
Leriche, Philippe,Turbiez, Mathieu,Monroche, Vincent,Frère, Pierre,Blanchard, Philippe,Skabara, Peter J.,Roncali, Jean
, p. 649 - 652 (2003)
Strong π-donors based on the association of TTF and 2,2′-bi(3,4-ethylenedioxy)thiophene conjugating unit have been synthesised; optical and an X-ray data show that intramolecular interactions lead to full rigidification of the conjugated system.
Probing the nature of donor-acceptor effects in conjugated materials: A joint experimental and computational study of model conjugated oligomers
Anderson, Trent E.,Badía-Domínguez, Irene,Buysse, Claire E.,Culver, Evan W.,Rasmussen, Seth C.,Ruiz Delgado, M. Carmen,Wilcox, Wyatt D.
, p. 26534 - 26546 (2021/12/13)
A series of model oligomers consisting of combinations of a traditional strong donor unit (3,4-ethylenedioxythiophene), a traditional strong acceptor unit (benzo[c][1,2,5]thiadiazole), and the ambipolar unit thieno[3,4-b]pyrazine were synthesized via cross-coupling methods. The prepared oligomers include all six possible dimeric combinations in order to characterize the extent and nature of donor-acceptor effects commonly used in the design of conjugated materials, with particular focus on understanding how the inclusion of ambipolar units influences donor-acceptor frameworks. The full oligomeric series was thoroughly investigated via photophysical and electrochemical studies, in parallel with density functional theory (DFT) calculations, in order to correlate the nature and extent of donor-acceptor effects on both frontier orbital energies and the desired narrowing of the HOMO-LUMO energy gap. The corresponding relationships revealed should then provide a deeper understanding of donor-acceptor interactions and their application to conjugated materials.
3,4-ethylenedioxythiophene derivative as well as preparation method and application thereof
-
Paragraph 0397; 0399; 0400; 0401, (2018/12/14)
The invention relates to a compound shown as a formula (I), wherein R1 to R6 are defined in the description. The compound is a 3,4-ethylenedioxythiophene derivative, can absorb radiation energy in a wavelength range of 365 to 405 nm, and has higher absorption in the range of 365 to 405 nm, so that the compound has high matching ability with the emission spectrum of a UV-LED (Ultraviolet-Light Emitting Diode) light source, high thermal stability, low odor and low toxicity. The invention further relates to a method for preparing the 3,4-ethylenedioxythiophene derivative and use of the compound as a photoinitiator. Compared with the conventional photoinitiator, the 3,4-ethylenedioxythiophene derivative as a photoinitiator has higher absorption in the wavelength range of 365 to 405 nm, and canbe applied to a UV-LED photo-curing system. The formula (I) is shown in the description.
PYRIDYL-ETHYLENEDIOXY-THIOPHENE DERIVATIVES AS TRANSPARENT CONDUCTIVE MATERIAL
-
Page/Page column 15; 16, (2018/09/25)
Described herein is a molecule for use as a conductive coating, the molecule comprising pH neutral or substantially neutral functionalities and presenting chemical diversity, transparency in the UV-Vis spectrum and solubility in common organic solvents. Also described herein is film prepared from a solution of a molecule described herein, a method of tuning the properties of a molecule described herein, a transparent electrode and an organic electronic device comprising a molecule described herein.