Welcome to LookChem.com Sign In|Join Free

CAS

  • or

3588-17-8

Post Buying Request

3588-17-8 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

3588-17-8 Usage

Chemical Properties

beige crystalline powder

Uses

Different sources of media describe the Uses of 3588-17-8 differently. You can refer to the following data:
1. A metabolite found in urine, which determines biological exposure index for workers exposed to Benzene.
2. trans,trans-1,3-Butadiene-1,4-dicarboxylic acid is a metabolite found in urine that determines biological exposure index for workers exposed to benzene.

Definition

ChEBI: The trans,trans-isomer of muconic acid. It is metabolite of benzene in humans and serves as a biomarker of occupational exposure to benzene.

Purification Methods

Crystallise the diacid from H2O. [Beilstein 2 IV 2298.]

Check Digit Verification of cas no

The CAS Registry Mumber 3588-17-8 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 3,5,8 and 8 respectively; the second part has 2 digits, 1 and 7 respectively.
Calculate Digit Verification of CAS Registry Number 3588-17:
(6*3)+(5*5)+(4*8)+(3*8)+(2*1)+(1*7)=108
108 % 10 = 8
So 3588-17-8 is a valid CAS Registry Number.
InChI:InChI=1/C6H6O4/c7-5(8)3-1-2-4-6(9)10/h1-4H,(H,7,8)(H,9,10)/p-2/b3-1+,4-2+

3588-17-8 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • Alfa Aesar

  • (L03987)  trans,trans-1,3-Butadiene-1,4-dicarboxylic acid, 98+%   

  • 3588-17-8

  • 1g

  • 169.0CNY

  • Detail
  • Alfa Aesar

  • (L03987)  trans,trans-1,3-Butadiene-1,4-dicarboxylic acid, 98+%   

  • 3588-17-8

  • 5g

  • 747.0CNY

  • Detail

3588-17-8SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 11, 2017

Revision Date: Aug 11, 2017

1.Identification

1.1 GHS Product identifier

Product name trans,trans-muconic acid

1.2 Other means of identification

Product number -
Other names MUCONIC ACID

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:3588-17-8 SDS

3588-17-8Relevant articles and documents

Molecular design and polymer structure control based on polymer crystal engineering. Topochemical polymerization of 1,3-diene mono- and dicarboxylic acid derivatives bearing a naphthylmethylammonium group as the countercation

Matsumoto, Akikazu,Nagahama, Sadamu,Odani, Toru

, p. 9109 - 9119 (2000)

The topochemical polymerization of the alkylammonium salts of (Z,Z)-, (E,Z)-, and (E,E)-1,3-diene mono- or dicarboxylic acids, i.e., of the muconic and sorbic acid derivatives, is described from the viewpoint of polymer crystal engineering. Not only the (Z,Z)- but also the (E,E)-derivatives polymerize to give a high molecular weight polymer in the crystalline state under UV irradiation when a naphthylmethylammonium moiety is introduced to these monomers as the countercation. NMR spectroscopy confirms the formation of the stereoregular meso- or erythro-diisotactic-trans-2,5-polymer during the polymerization, irrespective of the configuration of the monomers and the structure of the substituents. The single-crystal structure analysis of the naphthylmethylammonium salt of sorbic acid reveals the stacking of the diene moieties in the columns formed in the crystals, favorable for the topochemical polymerization. The photopolymerization reactivity and the stereochemistry of the resulting polymers are determined by the molecular packing in the crystals during the topochemical polymerization of the diene monomers.

Muconic acid production from methane using rationally-engineered methanotrophic biocatalysts

Henard, Calvin A.,Akberdin, Ilya R.,Kalyuzhnaya, Marina G.,Guarnieri, Michael T.

, p. 6731 - 6737 (2019)

Here, we demonstrate bioconversion of methane to muconic acid, a dicarboxylic acid that can be upgraded to an array of platform chemicals, by three gammaproteobacterial methanotrophs. All engineered methanotrophs expressing a heterologous dihydroxyshikimate dehydratase, protocatechuate decarboxylase, and catechol dioxygenase produced muconic acid from methane, with the highest titer (12.4 mg MA per L), yield (2.8 mg MA per g CH4), and specific productivity (1.2 mg MA per g dcw, 48 hr) synthesized by Methylotuvimicrobium buryatense, Methylococcus capsulatus, and Methylotuvimicrobium alcaliphilium, respectively. Methylotuvimicrobium alcaliphilum genome-scale model-guided strain engineering predicted that disruption of the pyruvate dehydrogenase or shikimate dehydrogenase would significantly enhance flux to the heterologous muconic acid pathway in this organism. However, knock-out of these targets caused a growth defect, and coupled with similar muconic acid titers (~1 mg L-1), resulted in minimal flux enhancement to muconic acid in these genetically-modified strains. The shikimate dehydrogenase mutant's ability to grow without aromatic amino acid supplementation revealed that M. alcaliphilum likely encodes an unidentified enzyme or pathway with shikimate biosynthetic capacity, which prevents maximal flux through the synthetic muconic acid pathway. This study expands the suite of products that can be generated from methane using methanotrophic biocatalysts, lays the foundation for green production of muconic acid-derived polymers from methane, and highlights the need for further analysis of methanotroph biosynthetic potential to guide refinement of metabolic models and strain engineering.

Solvent-driven isomerization of: cis, cis -muconic acid for the production of specialty and performance-advantaged cyclic biobased monomers

Carraher, Jack M.,Carter, Prerana,Cochran, Eric W.,Forrester, Michael J.,Pfennig, Toni,Rao, Radhika G.,Shanks, Brent H.,Tessonnier, Jean-Philippe

, p. 6444 - 6454 (2020/11/09)

The quest for green plastics calls for new routes to aromatic monomers using biomass as a feedstock. Suitable feedstock molecules and conversion pathways have already been identified for several commodity aromatics through retrosynthetic analysis. However, this approach suffers from some limitations as it targets a single molecule at a time. A more impactful approach would be to target bioprivileged molecules that are intermediates to an array of commodity and specialty chemicals along with novel compounds. Muconic acid (MA) has recently been identified as a bioprivileged intermediate as it gives access to valuable aliphatic and cyclic diacid monomers including terephthalic acid (TPA), 1,4-cyclohexanedicarboxylic acid (CHDA), and novel monounsaturated 1,4-cyclohexenedicarboxylic acids (CH1DA, CH2DA). However, accessing these cyclic monomers from MA requires to first isomerize biologically-produced cis,cis-MA to Diels-Alder active trans,trans-MA. A major impediment in this isomerization is the irreversible ring closing of MA to produce lactones. Herein, we demonstrate a green solvent-mediated isomerization using dimethyl sulfoxide and water. The mechanistic understanding achieved here elucidates the role of low concentrations of water in reducing the acidity of the system, thereby preventing the formation of lactones and improving the selectivity to trans,trans-MA from less than 5% to over 85%. Finally, a Diels-Alder reaction with trans,trans-MA is demonstrated with ethylene. The monounsaturated cyclic diacid obtained through this reaction (CH1DA) can be converted in a single step into TPA and CHDA, or can be directly copolymerized with adipic acid and hexamethylenediamine to tailor the thermal and mechanical properties of conventional Nylon 6,6.

Preparation method of gamma-substituted hexadienoic acid

-

Paragraph 0018; 0021-0022; 0025-0028, (2021/01/20)

The invention relates to a preparation method of gamma-substituted hexadienoic acid. The method is characterized by comprising the following steps: (1) at -10-40 DEG C, adding a solvent, a catalyst and a catalytic assistant into a reaction vessel, stirring, introducing oxygen, adding 1-(2-furyl)-1-alkyl methanol, controlling the molar ratio of the catalyst to the catalytic assistant to the 1-(2-furyl)-1-alkyl methanol at 0.0001-5:0.0001-3:100, reacting at 0-200 DEG C under 0.1-20 MPa for 1-74 h, wherein the solvent is a mixed solution composed of a water phase and an organic phase according toa volume ratio of 1:0.01-3, the water phase is a phosphate acidic solution, the organic phase is a reaction inert solvent, the catalyst is a palladium compound, and the catalytic assistant is an amine or phosphine compound; and (2) cooling the reaction vessel to room temperature, adding an organic solvent, extracting, and carrying out reduced pressure distillation on the organic phase. The methodhas the advantages that the defect of technical economy in an existing synthesis route is overcome, the technological process is simplified, consumption and emission are reduced, energy consumption and cost are reduced, and the method is suitable for industrial production for increasing productivity.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 3588-17-8