Oil-Flo Safety Solvent Cleaner
MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT SOURCE AND IDENTITY
Product description: Date: March 06, 2006
Supplier identity and address
Name: Oil-Flo Safety Solvent Cleaner
Titan Laboratories
1071 Wright Ave. Purpose: Safe, high flash point solvent cleaner
Mountain View, CA 94043 Proprietary Formula Code: TL OFSSC
Emergency : 800-255-3924 Product information: 650-965-9900
SECTION 2 - SHIPPING CLASSIFICATION
Proper Shipping Name, Hazard Class, UN/NA Number Packing Group, Emergency Response Guide Number
Not regulated
Labels required per 49 CFR 172.101: None
Qualifies for "Limited quantity" per 49 CFR 173.150-.155: Not applicable
Reportable Quantity ("RQ") per 49 CFR172.101: None or not possible in one non-bulk package
SECTION 3- SAFETY RATINGS AND HAZARDOUS INGREDIENT INFORMATION
Reporting required by Title III Sec 313, 40 CFR 372, 29 CFR 1910.1200 Exposure Limit Values
CAS# 313, dm % Material or Component Approx. % RQ# TWA STEL
95-63-6 Yes, 1 Trimethyl benzene 25 None 25 ppm
1330-20-7 Yes, 1 Xylene (mixed isomers) A4, BEI 1 100 100 ppm 150 ppm
98-82-8 Yes, 1 Cumene 1 5000 50 ppm (Skin)
64742-95-6 No Total aromatic petroleum distillates 65 None Not established
111-76-2 Yes, 1 2-butoxyethanol A3 7 None 20 ppm (Skin)
A3= Confirmed Animal carcinogen with Unknown Relevance to Humans A4= Not Classifiable as a
human carcinogen. BEI = indicates a Biological Exposure Limit exists for this material.
dm % = de minimus, the minimum percent which must be reported.
Note: The purpose of this MSDS is to provide safe handling, shipping and disposal information for users of the
product. It is not intended to, nor does it, provide complete or extensive toxicological data on the product or its
components. Users who require this information are referred to primary suppliers of the ingredients of interest.
Emergency overview: Aromatic based rinsible cleaning solvent. Keep out of eyes and away from fire.
Avoid extended skin contact. Do not breathe vapors. Keep lid on container when not in use.
Hazard Categories: Health Fire Pressure Reactivity Reference 49 CFR 171.8,
Immediate Yes No No No OSHA 29 CFR 1910.1200 and
Delayed No XXX XXX XXX SARA 302/311/312/313.
HMIS Hazard ratings: Health 1 Fire 2 Instability 0 Other B (Glasses, gloves)
NFPA 704 Hazard Ratings: Health 1 Flammability 2 Reactivity 0 Special NA
Hazard Ratings: Least: 0 Slight: 1 Moderate: 2 High: 3 Extreme: 4
Note: HMIS and NFPA ratings are subjective evaluations of hazards and can differ between preparers.
They are intended and useful only as a rapid approximation of the hazards rated.
Threshold limit value: Not established on product.
TOSCA Status: All ingredients listed
California Prop. 65: Ethyl benzene, 1, 4-dioxane, ethylene oxide, benzene, acetaldehyde, formaldehyde.
SECTION 4 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear, colorless to slight amber Flash point deg. F (cc): > 105' F
Odor: Bouquet plus petroleum Initial boiling point deg. C: 100'C (Component)
Specific gravity: 0.91 Vapor pressure 20 deg C: N pH reaction: 7.8 in water Freezing point deg. C: N % phosphorous: None Solubility in water: Partial
VOC Content: 844 g/L
California Rule 102 (66): Contains no photo chemically active materials.
Prop. 65: Contains substances known to the state of California to cause reproductive harm.
Prop. 65: Contains substances known to the state of California to cause cancer.
 Oil-Flo Safety Solvent Cleaner



SECTION 5 - SAFE HANDLING AND STORAGE
General Rinsible solvent cleaner. Store in a cool place. Keep out of eyes and off of skin.
Keep away from heat, flame, sparks and oxidizing chemicals. Keep containers sealed when not in use.
Wipe up spills immediately. Containers may be hazardous when empty: do not cut or weld.
Protective equipment
Eyes Safety glasses or goggles should be worn if there is possibility of eye contact.
Skin Impermeable gloves such as rubber, PVC or neoprene are recommended.
Respiratory protection None normally required. If risk of inhalation occurs, select and
use equipment according to OSHA/NIOSH guidelines
Ventilation A well ventilated work environment is recommended.
Other Electrically ground containers when transferring product.
SECTION 6- HEALTH SAFETY DATA
Effects of chronic over exposure
Eyes None.
Skin See Sec. 4. Can cause irritation from repeated exposure.
Inhalation See Sec. 4. Mists may be irritating to breathing passages.
Ingestion Not a likely source of chronic exposure.
SECTION 7 - PHYSICAL STABILITY AND REACTIVITY DATA
Approx. Explosive limits % Flash point: See Sec 4
Upper 1.0 Lower 10.6 Conditions to avoid: Exposure to heat and evaporation.
Chemical Stable
stability Hazardous decomposition products: None known
Hazardous Incompatibility: Oxidation chemicals like peroxides, etc.
polymerization Cannot occur
SECTION 8- EMERGENCY RESPONSE PROCEDURES
Extinguishing media Regular foam, water fog, carbon dioxide, dry chemical
Fire
Special procedures Wear full Bunker gear and respiratory protection (SCBA).
Unusual hazards None
Eyes Flush with water for at least 15 min. Seek medical attention if appropriate.
First
Skin Wash exposed skin with soap and water until gone. Remove affected
Aid
clothes rinse off product and wash clothes before reuse.
Inhalation If affected, remove individual to fresh air, get medical attention at
once if there is any discomfort.
Ingestion Dilute by giving large amounts of milk or water. Get medical attention
immediately. Do not induce vomiting.
Small / large spill Small amounts may be flushed to drain. Comply with federal,
Spills
state and local regulations on reporting spills. Floors may be slippery.
Dike spill if safe to do, and keep unauthorized people away. Extinguish all sources of ignition.
Keep out of waterways and storm sewers.
Product as made has the characteristic of ignitability, like " Unlisted Hazardous Waste D001", RQ 100#.
Information presented herein has been compiled from sources considered to be accurate and reliable, but is not
guaranteed to be so. Since conditions of use are beyond our control we make no warranties, expressed or implied.


1,2,4-Trimethylbenzene