NuGenTec
NuKut LT 1 PRD Number: MGB104 June 4, 2007


MATERIAL SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION AND USE

Product Identification
----------------------
Product Name: NuKut LT 1
Product Number: MGB104
CAS Number: Blend

Company Identification
----------------------
NuGeneration Technologies, LLC www.nugentec.com
100 Professional Center Dr., Rohnert Park, CA 94928
(707) 820-4080 (For product information)
1-800-424-9300 or 1-202-483-7616 (CHEMTREC: For emergencies)

2. HAZARDOUS INGREDIENTS

100.0% NuKut LT 1

CONTAINING:

HAZARDOUS AND/OR REGULATED COMPONENTS
Chemical Name Amount CAS Number
------------- -------- ----------
1H-BENZOTRIAZOLE, C-METHYL-, POTASSIUM SALT < 3.0 % 64665-53-8
BIOCIDE/FUNGICIDE (NON-FORMALDEHYDE) < 2.0 % Trade-Secret

NON-HAZARDOUS COMPONENTS
Chemical Name Amount CAS Number
------------- -------- ----------
DEFOAMER < 0.1 % TRADESECRET
MODIFIED ALCOHOL ETHOXYLATE < 4.0 % 68603-25-8
TETRASODIUM ETHYLENEDIAMINETETRAACETATE < 2.0 % 64-02-8
BALANCE NON-HAZARDOUS INGREDIENTS > 88.9 % N/A

EXPOSURE GUIDELINES:
No Information Available.

3. PHYSICAL DATA

FORM .....................: Liquid
COLOR ....................: Blue
ODOR .....................: Mild
BOILING POINT ............: >212 F
SOLUBILITY IN WATER ......: Complete
SPECIFIC GRAVITY .........: 1.026 (Water = 1)
BULK DENSITY .............: 8.56
MELTING/FREEZING POINT ...: 32 F
PH .......................: 10.6
% VOLATILES ..............: 0%
PH (5.0% B.V.) ...........: 10.3
NuGenTec
NuKut LT 1 PRD Number: MGB104 June 4, 2007

INHALATION:
No known hazards in normal industrial use.

INGESTION:
Ingestion is not considered a potential route of exposure.

CARCINOGENICITY INFORMATION:
No known cancer hazards.

MISCELLANEOUS:
Poses little or no immediate hazard. Slippery, can cause falls if walked
on.

4. FIRE AND EXPLOSION DATA

FLAMMABLE PROPERTIES
COC Flash Point: None
TCC Flash Point: None
Autoignition Temperature: None

FLAMMABLE LIMITS IN AI LEL: None
UEL: None

EXTINGUISHING MEDIA:
Will not burn.

FIRE & EXPLOSION HAZARDS:
Material will not burn.

5. REACTIVITY DATA

STABILITY:
Stable.

POLYMERIZATION:
Hazardous polymerization will not occur.

INCOMPATIBILITY WITH OTHER MATERIALS:
None known.

DECOMPOSITION:
Decomposition will not occur if handled and stored properly.

CONDITIONS TO AVOID:
This material is safe under normal storage and handling conditions.

6. TOXICOLOGICAL PROPERTIES

EYE:
Contact may cause eye irritation.

SKIN:
No hazard in normal industrial use. Not expected to be a skin irritant.
NuGenTec
NuKut LT 1 PRD Number: MGB104 June 4, 2007

Prolonged or repeated contact may result in drying of the skin which may
result in skin irritation and dermatitis.

INHALATION:
No known hazards in normal industrial use.

INGESTION:
Ingestion is not considered a potential route of exposure.

CARCINOGENICITY INFORMATION:
No known cancer hazards.

MISCELLANEOUS:
Poses little or no immediate hazard. Slippery, can cause falls if walked
on.

EYE EFFECTS:
Contact may cause eye irritation.

SKIN EFFECTS:
Contact may cause slight skin irritation.

ACUTE ORAL EFFECTS:
No know hazards in normal industrial use.

ACUTE INHALATION EFFECTS:
No know hazards in normal industrial use.

7. PREVENTITIVE MEASURES

RECOMMENDED STORAGE TEMPERATURE
Minimum: 4.4 C (39.9 F)
Maximum: 48.9 C (120.0 F)

HANDLING (PERSONNEL):
Avoid prolonged contact with skin or eyes.

HANDLING (PHYSICAL ASPECTS):
Store in a cool dry area.

STORAGE PRECAUTIONS:
Keep from freezing. Keep container closed when not in use.

ENGINEERING CONTROLS:
No special ventilation requirements.

EYE / FACE PROTECTION REQUIREMENTS:
Where contact with this material is likely, eye protection is recommended.

SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contamination.

RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special
handling equipment is required.
NuGenTec
NuKut LT 1 PRD Number: MGB104 June 4, 2007


SAFEGUARDS (PERSONNEL):
Wear appropriate personal protective equipment.

INITIAL CONTAINMENT:
Contain spilled material. Floor may become slippery. Wash area to
prevent slipping. Treat or dispose of waste material in accordance with
all local, state/provincial, and national requirements.

LARGE SPILLS PROCEDURE:
Forms smooth, slippery surfaces on floors, posing an accident risk. Flush
spill area with water to wastewater treatment system. After removal,
flush contaminated area thoroughly with water. Or absorb spill with inert
material (e g, dry sand or earth), then place in a chemical waste
container. Treat or dispose of waste material in accordance with all
local, state/provincial, and national requirements.

SMALL SPILLS PROCEDURE:
Floor may become slippery. Wash with water or absorb spills with inert
material. Treat or dispose of waste material in accordance with all
local, state/provincial, and national requirements.

WASTE DISPOSAL:
Treat or dispose of waste material in accordance with all local,
state/provincial, and national requirements. Uncleaned empty containers
should be disposed of in the same manner as the contents. For additional
waste disposal information contact your local NuGenTec representative at
(888) 99-NuGen.

CONTAMINATED MATERIALS:
Wash contaminated clothing before reuse.

CONTAINER DISPOSAL:
Clean out containers prior to disposal.

8. FIRST AID MEASURES

EYE CONTACT FIRST AID:
Flush eye with water for 15 minutes. Get medical attention if irritation
develops or persists.

SKIN CONTACT FIRST AID:
Immediately flush skin with plenty of water. Remove contaminated clothing
and shoes. Get medical attention if irritation develops or persists.

INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if
breathing is difficult, remove to fresh air and provide oxygen.

INGESTION FIRST AID:
Get medical attention immediately. Do not induce vomiting. Give milk or
water.

NOTES TO PHYSICIAN:
Treat patient symptomatically.
NuGenTec
NuKut LT 1 PRD Number: MGB104 June 4, 2007

9. PREPARATION DATE OF MSDS

Prepared By.......: Donato Polignone
Approval Date.....: June 4, 2007
Supercedes Date...: April 26, 1999
PRD Number........: MGB104 (Official Copy)

**********************************************************************
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of NuGeneration
Technologies, LLC. The data on this sheet are related only to the
specific material designated herein. NuGeneration Technologies, LLC
assumes no legal responsibility for use or reliance upon these data.

**********************************************************************
END OF MSDS
**********************************************************************


4(or 5)-methyl-1H-benzotriazole, potassium salt