MATERIAL SAFETY DATA SHEET
K&N Engineering, Inc.
P.O. Box 1329
Riverside, Ca. 92502-1329
(951) 826-4100 (M-F 8:00am ?? 4:00pm Pacific Standard Time)
Chemtrec (800) 424-9300 US / North America Outside US 703-527-3887 (collect calls accepted)
K&N Engineering, Air Filter Oil (Multi Language)

Date Prepared: 6/30/06 K&N PART # 99-0533, 99-0555, 99-18511, 99-0551, 99-11312, 99-5050 ===========================================================================================
This Material Safety Data Sheet contains environmental, health and toxicology information for your employees. Please
make sure this information is given to them. It also contains information to help you meet community Right To Know
Emergency Response reporting requirements under SARA TITLE III and many other laws. If you resell this product, this
MSDS must be given to the buyer or the information incorporated in your MSDS.
________________________________________________________________________________________________
This MSDS complies with 29 CFR 1910.1200 (The Hazard Communication Standard)

================== SECTION 1 - PRODUCT IDENTIFICATION =======================================

Product Name: K & N Air Filter Oil Red Chemical Name: Oil, n.o.s. Common Name: Petroleum Oil Cas #: Mixture

=================== SECTION 2 ?? COMPOSITION / INFORMATION ON INGREDIENTS ===================

Common Name / Chemical Name CAS # %

Hydrotreated heavy paraffinic distillate 64742-54-7 <100
Xylene 1330-20-7 <1
Methyl lardate 68082-78-0 <2

Contains no other ingredients now known to be hazardous as defined by OSHA 29 CFR 1910.1000(z).

===================== SECTION 3 ?? HAZARD IDENTIFICATION ====================================

Principle Hazards: Prolonged or repeated skin contact may cause dermatitis.
See section 11 for complete health hazard information

Threshold Limits: The PEL (OSHA) and the TLV (ACGIH) is 5 mg/m3 for oil mists.

Primary Routes of Exposure:

EYE May cause eye irritation if splashed into eyes.

SKIN Repeated or prolonged contact with skin may cause irritation, which may lead to various skin
disorders. Avoid prolonged skin contact.

INHALATION Inhalation of vapor or oil mist from this product may cause mild irritation of the respiratory system.
Use in well ventilated areas.

ORAL Ingestion may cause nausea, diarrhea and stomach discomfort.

====================== SECTION 4 ?? FIRST AID MEASURES ======================================

ORAL DO NOT INDUCE VOMITING. If conscious, give 2 glasses of water. Get immediate medical attention.

EYE Flush with water at least 15 minutes. Get medical attention if eye irritation develops or persists.

SKIN Wash immediately with soap and water. Remove soiled clothing. Get medical attention if irritation
Develops. Launder contaminated clothing.

INHALATION Remove exposed person to fresh air. If breathing is labored, administer oxygen and obtain immediate
Medical attention.
 K&N Engineering, Air Filter Oil (Multi Language)

K&N PART # 99-0533, 99-0555, 99-18511, 99-0551, 99-11312
Date Prepared: 6-30-06 ==================== SECTION 5 ?? FIRE FIGHTING MEASURES ====================================

FLASH POINT: >200?? C (COC) >392?? F May release flammable vapors when heated above the flash point.

EXTINGUISHING MEDIA Carbon dioxide, dry chemical or foam. Avoid using water.

HAZARDOUS EXPOSURE Carbon monoxide and asphyxiants.

SPECIAL FIRE PROCEDURES Recommend SCBA. Use water only for cooling container. Water may cause splat-
tering, or transport the flame.

================= Section 6 ?? ACCIDENTAL RELEASE MEASURES =================================

Evacuate all non-essential personnel. Personal protective equipment must be worn, see PPE section 8 & 16. Remove
sources of ignition. Prevent entry into sewers and waterways. Contain release, pick up free liquid for recycling or
disposal. Residual liquid can be absorbed with inert material. Check DOT / CERCLA and other agencies for reporting
requirements.

Prevent contamination to soil, waterway and sewer systems.

================== Section 7 ?? HANDLING AND STORAGE ======================================

HANDLING Avoid prolonged skin contact, breathing vapors, and contaminated clothing. Use with
adequate ventilation. Wear recommended protective equipment. Practice good personal
hygiene after handling.

Empty containers retain material residue. Do not cut, weld, braze, solder or expose containers
to other ignition sources.

STORAGE Store in closed containers of proper construction. Store away from ignition sources and in areas
of good ventilation.

============== Section 8 ?? EXPOSURE CONTROLS ?? PERSONAL PROTECTION ======================

EXPOSURE LIMITS: TLV = 5 mg/m3 as oil mist

VENTILATION: Use in areas of adequate ventilation. Use mechanical exhaust to control vapors or mists.

GLOVES: Nitrile or neoprene gloves are recommended.

EYE PROTECTION: Safety glasses, goggles, or a face shield are recommended.

RESPIRATORY: Use NIOSH/MSHA approved respirator with organic vapor cartridge and dust/mist cartridge is recom-
mended if exposure limit is exceeded. Self-contained breathing apparatus is recommended for
confined space entry.

CLOTHING: Long sleeve shirt and an apron is recommended when potential for skin contact is present. Wear neoprene
or nitrile rubber boots when necessary to avoid contaminating shoes.

===================== SECTION 9 ?? PHYSICAL AND CHEMICAL PROPERTIES ===================

APPEARANCE: Red oily liquid Ph: None detected
BOILING POINT: >300?? C SOLUBILITY: Negligible
EVAPORATION POINT: Less than ether SPECIFIC GRAVITY: 0.8650
FLAMMABILITY: N/A VAPOR DENSITY: Heavier than air
FLASH POINT: >200?? C VAPOR PRESSURE: <0.01mm Hg @ 20?? C
ODOR: Petroleum VOC %: Nil
 K&N Engineering, Air Filter Oil (Multi Language)

K&N PART # 99-0533, 99-0555, 99-18511, 99-0551, 99-11312
Date Prepared: 6-30-06 ================== SECTION 10 ?? STABILITY AND REACTIVITY ====================================

STABILITY: Material is normally stable at ambient temperature and pressure.

CONDITIONS TO AVOID: Oxidizing agents. Do not heat above the flash point.

POLYMERIZATION: Will not occur.

DECOMPOSITION: Carbon dioxide, carbon monoxide

================== SECTION 11 ?? TOXICOLOGICAL INFORMATION =================================

ORAL TOXICITY: Swallowing material may cause irritation of the gastrointestinal lining, nausea, vomiting, diarrhea and
abdominal pain.

EYE IRRITATION: Not expected to cause eye irritation.

SKIN IRRITATION: Not expected to be a primary skin irritant. Prolonged or repetitive contact may cause irritation.

CARCINOGENIC: This material has not been identified as a carcinogen by NTP, IARC, or OSHA.

================== SECTION 12 ?? ECOLOGICAL INFORMATION ====================================

This material is expected to have adverse affects on marine and plant life. Spills may contaminate drinking water.

================== SECTION 13 ?? DISPOSAL CONSIDERATIONS ===================================

DISPOSAL: Consult federal, state and local regulations regarding disposal methods. Recycle used oil. Do not
contaminate used oil with solvents or other chemicals.

================== SECTION 14 ?? TRANSPORTATION INFORMATION ==============================

See 49 CFR part 171.8 through 178.510 DOT SHIPPING NAME: Oil, n.o.s.

DOT HAZARD CLASS: Not Regulated UN/NA NUMBER: NA 1270 GUIDE NUMBER: 27 IMDG CODE

Materials classified as DOT Combustible liquids (Flash Point >141?? F and <200?? F) are not regulated by DOT in
containers of 110 gallons, or less for domestic shipments.

================== SECTION 15 ?? REGULATORY INFORMATION ===================================

TSCA All components of this material are on the US TSCA inventory.
SARA 311 CAL PROP 65 Not listed
SARA 312 RCRA Not listed
SARA 313 contains <1 ppm xylene CERCLA Listed

================= SECTION 16 - OTHER INFORMATION =========================================
Health Fire Reactivity PPE
HMIS CODE: 1 1 0 C
NFPA CODE: 1 1 0

Precautionary labels: NA

ADDITIONAL COMMENTS:
The above information is based on the data of which we are aware and is believed to be correct as of the date hereof. Since the
information contained herein may be applied under conditions beyond our control and with which we may be unfamiliar and since data
made available subsequent to the date hereof may suggest modification of the information, we do not assume any responsibility for the
results of its use. This information is furnished upon condition that the person receiving it shall make their own determination of the
suitability of the material for their particular purpose.


Oils, lard, Me esters