CAS : 68187-99-5
MATERIAL SAFETY DATA SHEET
Share Corporation
P.O. Box 245013
Milwaukee, WI 53224
GENERAL INFORMATION NUMBER: 414-355-4000 REVISION DATE: February 5, 2008
CHEMTREC: (800) 424-9300 DATE OF ISSUE: February 5, 2008
I - Product Identification
Arctic Wrench
PRODUCT CODE: 8107
CHEMICAL FORMULATION: PRESSURIZED PENETRATING LUBRICANT.
NFPA HAZARD IDENTIFICATION SYSTEM: HEALTH: 2 FLAMMABILITY: 3 REACTIVITY: 0
HAZARD RATING: 4 - Extreme; 3 - High; 2 - Moderate; 1 - Slight; 0 - Insignificant
II - Hazardous Ingredients
OSHA ACGIH EPA 40 CFR:
SUBSTANCE PEL TLV 302 355 372 CAS #
1,1 Difluoroethane N/E N/E N N N 75-37-6
Dimethylpolysiloxanes N/E N/E N N N 63148-62-9
Methyl Isobutyl Ketone 100 ppm 50 ppm Y N Y 108-10-1
Oleic Acid N/E N/E N N N 68187-99-5
Key: PEL: Permissible Exposure Limit TLV: Threshold Limit Value C: Ceiling level STEL: Short Term Exposure Limit
N/A: Not Applicable N/D: Not Determined N/E: Not Established Y: Yes N: No
302: CERCLA List of Hazardous Substances and Reportable Quantities (40 CFR 302.4).
355: SARA TITLE III / List of Extremely Hazardous Substances for Emergency Planning and Notification (40 CFR 355).
372: SARA TITLE III / List of Toxic Chemicals subject to Release Reporting (Community Right to Know) (40 CFR 372).
III - Physical Data
SPECIFIC GRAVITY (WATER = 1): 0.91 (Conc. only)
BOILING POINT (??F): N/ VAPOR PRESSURE (PSIG @ 70??F): <90 (Aerosol) VOC CONTENT (% by weight): N/ VAPOR DENSITY (AIR = 1): > 1.0 (Conc. only) EVAPORATION RATE (WATER = 1): N/ SOLUBILITY IN WATER: Negligible pH: N/ APPEARANCE AND ODOR: Clean colorless spray; faint solvent odor.
IV - Fire and Explosion Hazard Data
FLASH POINT (??F): N/A (concentrate) (TEST METHOD): Closed cup FLAME EXTENSION: 26 inches
FLAMMABLE LIMITS IN AIR (VOLUME %) UPPER: N/D LOWER: N/D NFPA 30B Rating: N/ EXTINGUISHING MEDIA: Foam, carbon dioxide, dry chemical.
SPECIAL FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water fog. Firefighters should be equipped with full
protective gear including self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARD: Exposure to temperature above 120??F may cause bursting.
PRODUCT NAME: Arctic Wrench PRODUCT CODE: 8107
V - Reactivity Data
STABILITY: Stable
INCOMPATIBILITY: Strong alkalis and strong oxidizers.
CONDITIONS TO AVOID: Excess heat and open flame. Dropping of containers may cause bursting.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition may produce oxides of carbon, hydrofluoric acid, and
possibly carbonyl fluoride.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: None
VI - Health Hazard Data
ROUTES OF ENTRY INHALATION: X EYE CONTACT: SKIN CONTACT: X INGESTION:
INGREDIENTS THAT ARE CONSIDERED BY OSHA, NTP, IARC TO BE SUSPECTED HUMAN CARCINOGENS:
None
EFFECTS OF OVEREXPOSURE
IF IN EYES: Irritant. May cause burning sensation.
IF ON SKIN: May cause burns and frostbite.
IF SWALLOWED: Possible chemical pneumonitis if aspirated into lungs.
IF INHALED: Product is an asphyxiant at very high concentrations. Excessive inhalation of vapors can be harmful and may cause
headache, disorientation, rapid respiration, nausea, anesthetic effects, temporary CNS depression, and possible unconsciousness.
Vapors are heavier than air and displace oxygen required for breathing. Higher exposures may lead to shortness of breath,
temporary alteration of cardiac electrical activity with irregular pulse, palpitations or inadequate circulation
EMERGENCY AND FIRST AID PROCEDURES
IF IN EYES: Flush eyes and under eyelids with plenty of cool water for at least 15 minutes. If irritation persists, obtain medical
attention.
IF ON SKIN: Treat burned or frostbitten skin by flushing or immersing affected areas in lukewarm water. If skin is not burned, keep
warm and stimulate circulation with massage. Seek medical attention immediately.
IF SWALLOWED: Contact physician or poison control center immediately. Give affected person 1 to 2 glasses of water. Do not
induce vomiting. Never give anything to an unconscious person.
IF INHALED: Remove person to fresh air. If breathing stops give artificial respiration. Seek medical attention immediately.
VII - Spill or Leak Protection
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Ventilate area and remove all sources of ignition.
WASTE DISPOSAL METHOD: Consult local environmental authorities. Dispose of cans in non-incinerated trash only.
VIII - Special Protection Information
RESPIRATORY PROTECTION: Use with adequate ventilation. If recommended Exposure Limits are exceeded wear a NIOSH
approved respirator, following manufacturer??s recommendations.
VENTILATION LOCAL: Recommended MECHANICAL: Not required
PROTECTIVE GLOVES: Chemical resistant.
EYE PROTECTION: Safety glasses.
OTHER PROTECTIVE EQUIPMENT: None.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in a cool, dry place away from heat or open flame. Do
not expose to direct sunlight or store at temperatures above 120??F.
OTHER PRECAUTIONS: Keep out of reach of children. Do not puncture or incinerate container.
IX - Transportation Information (ground transportation only)
DOT ID #: None DOT PROPER SHIPPING NAME: Consumer Commodity
DOT CLASS: ORM-D DOT PACKING GROUP: None
The shipping information listed above applies only to non-bulk (< 119 gallons) containers of this product. This product may have more than one proper
shipping name depending on packaging, product properties, & mode of shipment. If any alteration of packaging, product, or mode of transportation is further
intended, different shipping names and labeling may apply.
REVISION DATE: February 5, 2008 Prepared by: Technical Dept. DATE OF ISSUE: February 5, 2008
This information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or
the results to be obtained from the use thereof. Share Corporation assumes no responsibility for personal injury or property damage to the vendee, users or third
parties caused by the material such vendees or users assume all risks associated with the use of this material.
Share Corporation
P.O. Box 245013
Milwaukee, WI 53224
GENERAL INFORMATION NUMBER: 414-355-4000 REVISION DATE: February 5, 2008
CHEMTREC: (800) 424-9300 DATE OF ISSUE: February 5, 2008
I - Product Identification
Arctic Wrench
PRODUCT CODE: 8107
CHEMICAL FORMULATION: PRESSURIZED PENETRATING LUBRICANT.
NFPA HAZARD IDENTIFICATION SYSTEM: HEALTH: 2 FLAMMABILITY: 3 REACTIVITY: 0
HAZARD RATING: 4 - Extreme; 3 - High; 2 - Moderate; 1 - Slight; 0 - Insignificant
II - Hazardous Ingredients
OSHA ACGIH EPA 40 CFR:
SUBSTANCE PEL TLV 302 355 372 CAS #
1,1 Difluoroethane N/E N/E N N N 75-37-6
Dimethylpolysiloxanes N/E N/E N N N 63148-62-9
Methyl Isobutyl Ketone 100 ppm 50 ppm Y N Y 108-10-1
Oleic Acid N/E N/E N N N 68187-99-5
Key: PEL: Permissible Exposure Limit TLV: Threshold Limit Value C: Ceiling level STEL: Short Term Exposure Limit
N/A: Not Applicable N/D: Not Determined N/E: Not Established Y: Yes N: No
302: CERCLA List of Hazardous Substances and Reportable Quantities (40 CFR 302.4).
355: SARA TITLE III / List of Extremely Hazardous Substances for Emergency Planning and Notification (40 CFR 355).
372: SARA TITLE III / List of Toxic Chemicals subject to Release Reporting (Community Right to Know) (40 CFR 372).
III - Physical Data
SPECIFIC GRAVITY (WATER = 1): 0.91 (Conc. only)
BOILING POINT (??F): N/ VAPOR PRESSURE (PSIG @ 70??F): <90 (Aerosol) VOC CONTENT (% by weight): N/ VAPOR DENSITY (AIR = 1): > 1.0 (Conc. only) EVAPORATION RATE (WATER = 1): N/ SOLUBILITY IN WATER: Negligible pH: N/ APPEARANCE AND ODOR: Clean colorless spray; faint solvent odor.
IV - Fire and Explosion Hazard Data
FLASH POINT (??F): N/A (concentrate) (TEST METHOD): Closed cup FLAME EXTENSION: 26 inches
FLAMMABLE LIMITS IN AIR (VOLUME %) UPPER: N/D LOWER: N/D NFPA 30B Rating: N/ EXTINGUISHING MEDIA: Foam, carbon dioxide, dry chemical.
SPECIAL FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water fog. Firefighters should be equipped with full
protective gear including self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARD: Exposure to temperature above 120??F may cause bursting.
PRODUCT NAME: Arctic Wrench PRODUCT CODE: 8107
V - Reactivity Data
STABILITY: Stable
INCOMPATIBILITY: Strong alkalis and strong oxidizers.
CONDITIONS TO AVOID: Excess heat and open flame. Dropping of containers may cause bursting.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition may produce oxides of carbon, hydrofluoric acid, and
possibly carbonyl fluoride.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: None
VI - Health Hazard Data
ROUTES OF ENTRY INHALATION: X EYE CONTACT: SKIN CONTACT: X INGESTION:
INGREDIENTS THAT ARE CONSIDERED BY OSHA, NTP, IARC TO BE SUSPECTED HUMAN CARCINOGENS:
None
EFFECTS OF OVEREXPOSURE
IF IN EYES: Irritant. May cause burning sensation.
IF ON SKIN: May cause burns and frostbite.
IF SWALLOWED: Possible chemical pneumonitis if aspirated into lungs.
IF INHALED: Product is an asphyxiant at very high concentrations. Excessive inhalation of vapors can be harmful and may cause
headache, disorientation, rapid respiration, nausea, anesthetic effects, temporary CNS depression, and possible unconsciousness.
Vapors are heavier than air and displace oxygen required for breathing. Higher exposures may lead to shortness of breath,
temporary alteration of cardiac electrical activity with irregular pulse, palpitations or inadequate circulation
EMERGENCY AND FIRST AID PROCEDURES
IF IN EYES: Flush eyes and under eyelids with plenty of cool water for at least 15 minutes. If irritation persists, obtain medical
attention.
IF ON SKIN: Treat burned or frostbitten skin by flushing or immersing affected areas in lukewarm water. If skin is not burned, keep
warm and stimulate circulation with massage. Seek medical attention immediately.
IF SWALLOWED: Contact physician or poison control center immediately. Give affected person 1 to 2 glasses of water. Do not
induce vomiting. Never give anything to an unconscious person.
IF INHALED: Remove person to fresh air. If breathing stops give artificial respiration. Seek medical attention immediately.
VII - Spill or Leak Protection
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Ventilate area and remove all sources of ignition.
WASTE DISPOSAL METHOD: Consult local environmental authorities. Dispose of cans in non-incinerated trash only.
VIII - Special Protection Information
RESPIRATORY PROTECTION: Use with adequate ventilation. If recommended Exposure Limits are exceeded wear a NIOSH
approved respirator, following manufacturer??s recommendations.
VENTILATION LOCAL: Recommended MECHANICAL: Not required
PROTECTIVE GLOVES: Chemical resistant.
EYE PROTECTION: Safety glasses.
OTHER PROTECTIVE EQUIPMENT: None.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in a cool, dry place away from heat or open flame. Do
not expose to direct sunlight or store at temperatures above 120??F.
OTHER PRECAUTIONS: Keep out of reach of children. Do not puncture or incinerate container.
IX - Transportation Information (ground transportation only)
DOT ID #: None DOT PROPER SHIPPING NAME: Consumer Commodity
DOT CLASS: ORM-D DOT PACKING GROUP: None
The shipping information listed above applies only to non-bulk (< 119 gallons) containers of this product. This product may have more than one proper
shipping name depending on packaging, product properties, & mode of shipment. If any alteration of packaging, product, or mode of transportation is further
intended, different shipping names and labeling may apply.
REVISION DATE: February 5, 2008 Prepared by: Technical Dept. DATE OF ISSUE: February 5, 2008
This information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or
the results to be obtained from the use thereof. Share Corporation assumes no responsibility for personal injury or property damage to the vendee, users or third
parties caused by the material such vendees or users assume all risks associated with the use of this material.
TALL OIL FATTY ACID)