BondPak 7513 Adhesive Material Safety Data Sheet 1 of 12


MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
ISSUSED: March 10, 2003

TRADE NAME:

BondPak 7513 Adhesive


This product is a kit which contains both the Part A and Part B
independently packaged in a duel cartridge syringe. An MSDS for each
of these components is included. Please do not separate the component
MSDSs from this cover page.




The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user??s methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro Corporation product, some of which are
uniquely within the user??s knowledge and control, it is essential that
the user evaluate the BondPro Corporation product to determine whether
it is fit for a particular purpose and suitable for user??s method of
use or application.

BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
BondPak 7513 Adhesive Material Safety Data Sheet 2 of 12




SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
May 30, 2001

TRADE NAME:

BondPro 7513 Adhesive part A

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS

SUBSTANCE DESCRIPTION CAS# PERCENT
SYNTHETIC RUBBER OLIGOMER TradeSecret 40 - 70
POLYFUNCTIONAL AZIRIDINE 64265-57-2 10 - 30
COMPLEXED AMINE/POLYOL BLEND TradeSecret 1.0 - 5.0
AMORPHOUS SILICA 7631-86-9 1.0 - 5.0

This material is not on EINECS and should be used in Europe only for
research purposes in order to establish its properties. The
components of this product are in compliance with the chemical
notification requirements of TSCA

SECTION 3. PHYSICAL DATA

BOILING POINT: N/A
VAPOR PRESSURE: < 0.1 mmHg
VAPOR DENSITY: N/ EVAPORATION RATE: N/ SOLUBILITY IN WATER: slight
SPECIFIC GRAVITY: 1.028 g/cc
PERCENT VOLATILE: 7.9 % by wt ASTM D2369 @110 C
pH: N/A
VISCOSITY: 25000 - 35000 centipoise
MELTING POINT: N/A

APPEARANCE AND ODOR:
Paste, WHITE, MILD ODO
SECTION 4. FIRE AND EXPLOSION HAZARD DATA

FLASH POINT: 223 F Setaflash
FLAMMABLE LIMITS - LEL: N/ FLAMMABLE LIMITS - UEL: N/ AUTOIGNITION TEMPERATURE: N/ BondPak 7513 Adhesive Material Safety Data Sheet 3 of 12


BondPro 7513 Adhesive part A EXTINGUISHING MEDIA:
Water spray, Carbon dioxide, Dry chemical, Foam

SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.

UNUSUAL FIRE AND EXPLOSION HAZARDS:
Not determined.

NFPA HAZARD CODES: HEALTH: 2 FIRE: 2 REACTIVITY: 0

UNUSUAL REACTION HAZARD: none

OSHA FIRE HAZARD CLASS: Class II Combustible Liquid



SECTION 5. REACTIVITY DATA

STABILITY: Stable

INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Strong Acids, Heat.

HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.

HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Aldehydes,
Amine Compounds, Toxic Vapors, Gases or Particulates.


SECTION 6. ENVIRONMENTAL INFORMATION

SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Extinguish all ignition sources.
Contain spill. Cover with inorganic absorbent material. Cover with
water. Collect spilled material. Clean up residue. Place in a
closed container. Cloth or paper contaminated with adhesive should be
disposed of in a metal container, covered with water and container
sealed.

RECOMMENDED DISPOSAL:
Incinerate in an industrial or commercial facility. Do not dispose
of in a sanitary landfill.

ENVIRONMENTAL DATA:
Not applicable.

REGULATORY INFORMATION:
Volatile Organic Compounds: 81 gms/liter South Coast Air Quality Mgmt
Dist Method.
BondPak 7513 Adhesive Material Safety Data Sheet 4 of 12


BondPro 7513 Adhesive part A
VOC Less H2O & Exempt Solvents: 81 gms/liter South Coast Air Quality
Mgmt Dist Method.
Since regulations vary, consult applicable regulations or authorities
before disposal. In the event of an uncontrolled release of this
material, the user should determine if the release qualifies as a
reportable quantity.
When components B & A are mixed at a 10:1 ratio, the specific gravity
of the mixture is 1.006 . The VOC content (less water and exempt
solvent) for the mixture is 218 g/l

EPCRA HAZARD CLASS:
FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: No

SECTION 7. SUGGESTED FIRST AI EYE CONTACT:
Immediately flush eyes with large amounts of water for at least 15
minutes. Get immediate medical attention.

SKIN CONTACT:
Immediately flush skin with large amounts of water. Remove
contaminated clothing. If irritation persists, call a physician. Wash
contaminated clothing before reuse.

INHALATION:
If signs/symptoms occur, remove person to fresh air. If
signs/symptoms continue, call a physician.

IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.

SECTION 8. PRECAUTIONARY INFORMATION

EYE PROTECTION:
Avoid eye contact. Wear safety glasses with side shields.

SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material(s) are
recommended: butyl rubber, nitrile rubber, polyethylene, polyvinyl
alcohol.

RECOMMENDED VENTILATION:
Do not use in a confined area or areas with little or no air
movement. Provide appropriate local exhaust when product is heated.
Use in a well-ventilated area. If exhaust ventilation is not
adequate, use appropriate respiratory protection.

RESPIRATORY PROTECTION:
Avoid breathing of vapors. half-mask organic vapor respirator, full-
face organic vapor respirator.

PREVENTION OF ACCIDENTAL INGESTION:
Wash hands after handling and before eating. Do not ingest.
BondPak 7513 Adhesive Material Safety Data Sheet 5 of 12


BondPro 7513 Adhesive part A
RECOMMENDED STORAGE:
Store away from acids. Store away from heat. Keep container dry.

FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed. Keep away from heat, sparks, open
flame, and other sources of ignition. Combustible liquid and vapor.

OTHER PRECAUTIONARY INFORMATION:
Not intended for consumer sale or use.
When equalizing plungers, prior to use, dispense unmixed adhesive
onto a clean, solvent-free, non-porous surface such as aluminum foil,
glass or a metal can. Do not dispense unmixed adhesive onto paper or
cloth towels or rags.

EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
SYNTHETIC RUBBER OLIGOMER NONE NONE NONE NONE
POLYFUNCTIONAL AZIRIDINE NONE NONE NONE NONE
COMPLEXED AMINE/POLYOL BLEND NONE NONE NONE NONE
AMORPHOUS SILICA 3 MG/M3 TWA CMRG
AS RESPIRABLE DUST

* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer
to the potential contribution to the overall exposure by the cutaneous
route including mucous membrane and eye, either by airborne or, more
particularly, by direct contact with the substance. Vehicles can alter
skin absorption.

SOURCE OF EXPOSURE LIMIT DATA:
- CMRG: Chemical Manufacturer Recommended Exposure Guidelines
- NONE: None Established


SECTION 9. HEALTH HAZARD DATA

EYE CONTACT:
Chemical Related Eye Burns (chemical corrosivity): signs/symptoms can
include cloudy appearance of the cornea, chemical burns, pain,
tearing, ulcers, impaired vision or loss of vision.

SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Severe Skin Irritation (after prolonged or repeated contact):
signs/symptoms can include redness, swelling, itching, dryness,
cracking, blistering, and pain. May be absorbed through the skin and
produce effects similiar to those caused by inhalation and/or
ingestion.

INHALATION:
Health effects from inhalation are not expected unless product is
heated.
Allergic Respiratory Reaction: signs/symptoms can include difficulty
BondPak 7513 Adhesive Material Safety Data Sheet 6 of 12


BondPro 7513 Adhesive part A
breathing, wheezing, tightness of chest, and respiratory failure.
Irritation (upper respiratory): signs/symptoms can include soreness
of the nose and throat, coughing and sneezing.


WHILE THE FOLLOWING EFFECTS ARE ASSOCIATED WITH ONE OR MORE OF THE
INDIVIDUAL INGREDIENTS IN THIS PRODUCT AND ARE REQUIRED TO BE
INCLUDED ON THE MSDS BY THE U.S. OSHA HAZARD COMMUNICATION STANDARD,
THEY ARE NOT EXPECTED EFFECTS DURING FORESEEABLE USE OF THIS PRODUCT.
Kidney Effects: signs/symptoms can include reduced urine volume,
blood in urine and back pain.
Liver Effects: signs/symptoms can include yellow skin(jaundice) and
tenderness of upper abdomen.

IF SWALLOWED:
Illness may occur after a single swallowing of relatively large
quantities of this material.
Irritation of Gastrointestinal Tissues: signs/symptoms can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
Liver Effects: signs/symptoms can include yellow skin(jaundice) and
tenderness of upper abdomen.


Abbreviations: N/D - Not Determined N/A - Not Applicable CA -
Approximately




The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user??s methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro

Corporation product, some of which are uniquely within the user??s
knowledge and control, it is essential that the user evaluate the
BondPro Corporation product to determine whether it is fit for a
particular purpose and suitable for user??s method of use or
application.

BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
BondPak 7513 Adhesive Material Safety Data Sheet 7 of 12




SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
Issued: June 25, 2001

TRADE NAME:

BondPak 7513 Adhesive part B

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS

SUBSTANCE DESCRIPTION CAS# PERCENT
METHACRYLATE 2455-24-5 40 - 70
ACRYLONITRILE-BUTADIENE-STYRENE RESIN 9003-56-9 10 - 30
DIBUTYL ITACONATE 2155-60-4 5.0 - 10.0
SYNTHETIC RUBBER OLIGOMER TradeSecret 1.0 - 5.0
MICROSPHERES 66402-68-4 1-5
IMPACT MODIFIER 20882-04-6 0.5 - 1.5

This material is not on EINECS and should be used in Europe only for
research purposes in order to establish its properties. The
components of this product are in compliance with the chemical
notification requirements of TSCA.

SECTION 3. PHYSICAL DATA

BOILING POINT: N/ VAPOR PRESSURE: < 0.1 mmHg
VAPOR DENSITY: N/ EVAPORATION RATE: N/ SOLUBILITY IN WATER: slight
SPECIFIC GRAVITY: 1.009 g/cc
PERCENT VOLATILE: 59.47 % ASTM @ 110 degrees C
pH: N/A
VISCOSITY: 25000-35000 centipoise
MELTING POINT: N/A

APPEARANCE AND ODOR:
Paste, pink/amber, mild acrylic odor
BondPak 7513 Adhesive Material Safety Data Sheet 8 of 12




BondPak 7513 Adhesive part B
SECTION 4. FIRE AND EXPLOSION HAZARD DATA


FLASH POINT: 206 F Setaflash
FLAMMABLE LIMITS - LEL: N/ FLAMMABLE LIMITS - UEL: N/ AUTOIGNITION TEMPERATURE: N/
EXTINGUISHING MEDIA:
Water spray, Carbon dioxide, Dry chemical, Foam

SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.

UNUSUAL FIRE AND EXPLOSION HAZARDS:
Not determined.

NFPA HAZARD CODES: HEALTH: 2 FIRE: 3 REACTIVITY: 0

UNUSUAL REACTION HAZARD: none

OSHA FIRE HAZARD CLASS: IB Flammable Liquid

SECTION 5. REACTIVITY DATA

STABILITY: Stable

INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Strong Acids, Heat.

HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.

HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Aldehydes,
Amine Compounds, Toxic Vapors, Gases or Particulates.


SECTION 6. ENVIRONMENTAL INFORMATION

SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Extinguish all ignition sources.
Contain spill. Cover with inorganic absorbent material. Cover with
water. Collect spilled material. Clean up residue. Place in a
closed container. Cloth or paper contaminated with adhesive should be
disposed of in a metal container, covered with water and container
sealed.
BondPak 7513 Adhesive Material Safety Data Sheet 9 of 12


BondPak 7513 Adhesive part B
RECOMMENDED DISPOSAL:
Incinerate in an industrial or commercial facility. Do not dispose
of in a sanitary landfill.

ENVIRONMENTAL DATA:
No data available.

REGULATORY INFORMATION:
Volatile Organic Compounds: 597 gms/liter South Coast Air Quality Mgmt
Dist Method.
VOC Less H2O & Exempt Solvents: 597 gms/liter South Coast Air Quality
Mgmt Dist Method.
Since regulations vary, consult applicable regulations or authorities
before disposal. In the event of an uncontrolled release of this
material, the user should determine if the release qualifies as a
reportable quantity.
When components B & A are mixed at a 10:1 ratio, the specific gravity
of the mixture is 1.006 g/cc. The VOC content (less water and exempt
solvent) for the mixture is 218 g/l

EPCRA HAZARD CLASS:
FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: No

SECTION 7. SUGGESTED FIRST AI EYE CONTACT:
Immediately flush eyes with large amounts of water. Get immediate
medical attention.

SKIN CONTACT:

Flush skin with large amounts of water. If irritation persists, get
medical attention.

INHALATION:
Remove person to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, get immediate medical
attention.

IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician

SECTION 8. PRECAUTIONARY INFORMATION

EYE PROTECTION:
Avoid eye contact. Wear safety glasses with side shields.

SKIN PROTECTION:
Wear appropriate gloves when handling this material. A pair of
gloves made from the following material(s) are recommended: butyl
rubber, nitrile rubber, polyethylene, polyvinyl alcohol.

RECOMMENDED VENTILATION:
Use with appropriate local exhaust ventilation. Use in a well-
BondPak 7513 Adhesive Material Safety Data Sheet 10 of 12


BondPak 7513 Adhesive part B
ventilated area. If exhaust ventilation is not adequate, use
appropriate respiratory protection.

RESPIRATORY PROTECTION:
Avoid breathing of vapors. half-mask organic vapor respirator, full-
face organic vapor respirator.

PREVENTION OF ACCIDENTAL INGESTION:
Do not ingest.

RECOMMENDED STORAGE:
Store away from acids. Store away from heat. Keep container dry.

FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed. Keep away from heat, sparks, open
flame, and other sources of ignition. Combustible liquid and vapor.

OTHER PRECAUTIONARY INFORMATION:
Not intended for consumer sale or use.
When equalizing plungers, prior to use, dispense unmixed adhesive
on to a clean, solvent free non-porous surface such as aluminum foil,
glass or a metal can. Do not dispense unmixed adhesive onto paper or
cloth towels or rags.


EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
METHACRYLATE NONE NONE NONE NONE
ACRYLONITRILE-BUTADIENE-STYRENE
RESIN NONE NONE NONE NONE
DIBUTYL ITACONATE NONE NONE NONE NONE
SYNTHETIC RUBBER OLIGOMER NONE NONE NONE NONE
MICROSPHERES NONE NONE NONE NONE
IMPACT MODIFIER NONE NONE NONE NONE

* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer
to the potential contribution to the overall exposure by the cutaneous
route including mucous membrane and eye, either by airborne or, more
particularly, by direct contact with the substance. Vehicles can alter
skin absorption.

SOURCE OF EXPOSURE LIMIT DATA:
- NONE: None Established


SECTION 9. HEALTH HAZARD DATA

EYE CONTACT:
Moderate Eye Irritation: signs/symptoms can include redness, swelling,
pain, tearing, and hazy vision.

SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
BondPak 7513 Adhesive Material Safety Data Sheet 11 of 12


BondPak 7513 Adhesive part B
blistering, and itching. Moderate Skin Irritation: signs/symptoms can
include redness, swelling, itching, and dryness. May be absorbed
through the skin and produce effects similar to those caused by
inhalation and/or ingestion.
WHILE THE FOLLOWING EFFECTS ARE ASSOCIATED WITH ONE OR MORE OF THE
INDIVIDUAL INGREDIENTS IN THIS PRODUCT AND ARE REQUIRED TO BE
INCLUDED ON THE MSDS BY THE U.S. OSHA HAZARD COMMUNICATION STANDARD,
THEY ARE NOT EXPECTED EFFECTS DURING FORESEEABLE USE OF THIS PRODUCT.
Nervous System Effects: signs/symptoms can include emotional changes,
lack of coordination, tremors and sensory loss.

INHALATION:
Irritation (upper respiratory): signs/symptoms can include soreness
of the nose and throat, coughing and sneezing.

WHILE THE FOLLOWING EFFECTS ARE ASSOCIATED WITH ONE OR MORE OF THE
INDIVIDUAL INGREDIENTS IN THIS PRODUCT AND ARE REQUIRED TO BE
INCLUDED ON THE MSDS BY THE U.S. OSHA HAZARD COMMUNICATION STANDARD,
THEY ARE NOT EXPECTED EFFECTS DURING FORESEEABLE USE OF THIS PRODUCT.
Kidney Effects: signs/symptoms can include reduced urine volume,
blood in urine and back pain.
Liver Effects: signs/symptoms can include yellow skin(jaundice) and
tenderness of upper abdomen.
Nervous System Effects: signs/symptoms can include emotional changes,
lack of coordination, tremors and sensory loss.

IF SWALLOWED:
Illness may occur after a single swallowing of relatively large
quantities of this material.
Irritation of Gastrointestinal Tissues: signs/symptoms can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.


Abbreviations: N/D - Not Determined N/A - Not Applicable CA -
Approximately



The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user??s methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro

Corporation product, some of which are uniquely within the user??s
knowledge and control, it is essential that the user evaluate the
BondPro Corporation product to determine whether it is fit for a
particular purpose and suitable for user??s method of use or
application.
BondPak 7513 Adhesive Material Safety Data Sheet 12 of 12



BondPak 7513 Adhesive part B
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.


MONO-2-(METHACRYLOYLOXY)ETHYL SUCCINATE