Preconcentration of trace lead and iron on activated carbon functionalized by o-Anisic acid (cas 100-09-4) derivatives prior to their determination in environmental samples
-
Add time:07/23/2019 Source:sciencedirect.com
Two solid-phase adsorbents (phase I and phase II) were synthesized successfully that o-Anisic acid derivatives were evenly functionalized on the surface of activated carbon. It was certified that the two adsorbents were applied to preconcentrate and separate trace levels of Pb(II) and Fe(III) from natural liquid samples with satisfactory results. It can be found that the adsorption capacity of the ions adsorbed on phase I and phase II was 48.3 and 85.7 mg g−1 for Pb(II), 39.5 and 72.5 mg g−1 for Fe(III), respectively. The detection limit (3σ) of the method separated on phase I and phase II was 0.12 and 0.09 ng mL−1 for Pb(II), 0.23 and 0.17 ng mL−1 for Fe(III), respectively. The relative standard deviation (R.S.D.) of the method was lower than 3.0%.The adsorption and desorption property of two kinds of adsorbents was comparatively studied, respectively. The adsorption selectivity of heavy metal ions at certain pH, the adsorption kinetics, the condition of complete elution, the effect of coexisting ions, the adsorption capacity and adsorption isotherm modes were examined. Based on the experimental datum determined by inductively coupled plasma optical emission spectrometry (ICP-OES), it was certified that the adsorption on the surface of adsorbents was in strict accordance with the monolayer adsorption principle. The structural features of series of multidentate ligand modified on adsorption matrix had been obtained. These conclusions can provide reference for synthesizing an efficient adsorbent which is specific to remove a particular kind of contaminant.
We also recommend Trading Suppliers and Manufacturers of Anisic acid (cas 100-09-4). Pls Click Website Link as below: cas 100-09-4 suppliers
Prev:Formulation and evaluation of anise-based bioadhesive vaginal gels
Next:Optimization and comparison of ultrasound-assisted extraction and microwave-assisted extraction of shikimic acid from Chinese star anise) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Physical and antimicrobial properties of anise oil loaded nanoemulsions on the survival of foodborne pathogens07/28/2019
- Evaluation of antibacterial efficacy of anise wastes against some multidrug resistant bacterial isolates07/27/2019
- Anise, parsley and rocket as nematicidal soil amendments and their impact on non-target soil organisms07/26/2019
- Kinetics of micellar catalysis on oxidation of p-anisaldehyde to p-Anisic acid (cas 100-09-4) in aqueous medium at room temperature07/25/2019
- Optimization and comparison of ultrasound-assisted extraction and microwave-assisted extraction of shikimic acid from Chinese star anise07/24/2019
- Formulation and evaluation of anise-based bioadhesive vaginal gels07/22/2019
- Total quantification and extraction of shikimic acid from star anise (llicium verum) using solid-state NMR and cellulose-dissolving aqueous hydroxide solutions07/20/2019
- Crystal Structures of the Free and Anisic acid (cas 100-09-4) Bound Triple Mutant of Phospholipase A207/21/2019
- Transmission of p-Anisic acid (cas 100-09-4) through nanofiltration and goat membranes07/19/2019
-
Health and Chemical more >