IUPAC Name: 1-Ethylpiperidine
CAS: 766-09-6
Formula : C₇H₁₅N
Molecular Weight: 113.2
Molecular Structure of 1-Ethylpiperidine (766-09-6):
 
Density: 0.837 g/cm³ 
Flash Point: 18.9 °C
Melting Point: -20 °C 
Boiling Point: 125.6 °C at 760 mmHg  
Index of Refraction: 1.444 
Molar Refractivity: 35.95 cm³ 
Molar Volume: 135 cm³ 
Polarizability: 14.25×10^-24cm³ 
Surface Tension: 26.7 dyne/cm 
Enthalpy of Vaporization: 36.35 kJ/mol 
Vapour Pressure: 12.1 mmHg at 25°C
Appearance: clear colourless to slightly yellowish liquid
Water Solubility: 3.461e+004(mg/L) at 25°C
Product Categories: piperidine;building blocks;heterocyclic building blocks;piperidines.

Reported in EPA TSCA Inventory.

Poison by intravenous and subcutaneous routes. An eye irritant. A very dangerous fire hazard when exposed to heat or flame; can react vigorously with oxidizing materials. When heated to decomposition it emits toxic fumes of NO_x.
Safety Information about 1-Ethylpiperidine (766-09-6):
Hazard Codes: 
F:   
Xn:
Risk Statements about 1-Ethylpiperidine (766-09-6):
R11: Highly Flammable.
R20/22: Harmful by inhalation and if swallowed.
R36/37/38: Irritating to eyes, respiratory system and skin.
Safety Statements about 1-Ethylpiperidine (766-09-6):
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39: Wear suitable protective clothing, gloves and eye/face protection.
RIDADR: UN 2386 3/PG 2
WGK Germany: 1
RTECS: TN0250000
F10: Keep under argon.
F23: Sensitive to air.
HazardClass: 3
PackingGroup: II

DOT Classification:  3; Label: Flammable Liquid

  The chemical synonyms of 1-Ethylpiperidine (766-09-6) are 1-Ethvlpiperidine ; 1-Ethylpiperidene ; 1-Ethylpiperidin ; 1-Ethyl-piperidin ; Ethylpiperidylamnie ; Aethylpiperidin ; 1-Ethylpiperidine ; N-ethylpiperidine .It may cause toxic effects if inhaled or ingested/swallowed. Contact with substance may cause severe burns to skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.It may be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas. Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.