- A mild and selective Cu(II) salts-catalyzed reduction of nitro, azo, azoxy, N-aryl hydroxylamine, nitroso, acid halide, ester, and azide compounds using hydrogen surrogacy of sodium borohydride
-
The first mild, in situ, single-pot, high-yielding well-screened copper (II) salt-based catalyst system utilizing the hydrogen surrogacy of sodium borohydride for selective hydrogenation of a broad range of nitro substrates into the corresponding amine under habitancy of water or methanol like green solvents have been described. Moreover, this catalytic system can also activate various functional groups for hydride reduction within prompted time, with low catalyst-loading, without any requirement of high pressure or molecular hydrogen supply. Notably, this system explores a great potential to substitute expensive traditional hydrogenation methodologies and thus offers a greener and simple hydrogenative strategy in the field of organic synthesis.
- Kalola, Anirudhdha G.,Prasad, Pratibha,Mokariya, Jaydeep A.,Patel, Manish P.
-
supporting information
p. 3565 - 3589
(2021/10/12)
-
- Deoxygenative hydroboration of primary, secondary, and tertiary amides: Catalyst-free synthesis of various substituted amines
-
Transformation of relatively less reactive functional groups under catalyst-free conditions is an interesting aspect and requires a typical protocol. Herein, we report the synthesis of various primary, secondary, and tertiary amines through hydroboration of amides using pinacolborane under catalyst-free and solvent-free conditions. The deoxygenative hydroboration of primary and secondary amides proceeded with excellent conversions. The comparatively less reactive tertiary amides were also converted to the corresponding N,N-diamines in moderate yields under catalyst-free conditions, although alcohols were obtained as a minor product.
- An, Duk Keun,Jaladi, Ashok Kumar,Kim, Hyun Tae,Yi, Jaeeun
-
-
- Zirconium-hydride-catalyzed site-selective hydroboration of amides for the synthesis of amines: Mechanism, scope, and application
-
Developing mild and efficient catalytic methods for the selective synthesis of amines is a longstanding research objective. In this respect, catalytic deoxygenative amide reduction has proven to be promising but challenging, as this approach necessitates selective C–O bond cleavage. Herein, we report the selective hydroboration of primary, secondary, and tertiary amides at room temperature catalyzed by an earth-abundant-metal catalyst, Zr-H, for accessing diverse amines. Various readily reducible functional groups, such as esters, alkynes, and alkenes, were well tolerated. Furthermore, the methodology was extended to the synthesis of bio- and drug-derived amines. Detailed mechanistic studies revealed a reaction pathway entailing aldehyde and amido complex formation via an unusual C–N bond cleavage-reformation process, followed by C–O bond cleavage.
- Han, Bo,Jiao, Haijun,Wu, Lipeng,Zhang, Jiong
-
p. 2059 - 2067
(2021/09/02)
-
- Generation of Oxidoreductases with Dual Alcohol Dehydrogenase and Amine Dehydrogenase Activity
-
The l-lysine-?-dehydrogenase (LysEDH) from Geobacillus stearothermophilus naturally catalyzes the oxidative deamination of the ?-amino group of l-lysine. We previously engineered this enzyme to create amine dehydrogenase (AmDH) variants that possess a new hydrophobic cavity in their active site such that aromatic ketones can bind and be converted into α-chiral amines with excellent enantioselectivity. We also recently observed that LysEDH was capable of reducing aromatic aldehydes into primary alcohols. Herein, we harnessed the promiscuous alcohol dehydrogenase (ADH) activity of LysEDH to create new variants that exhibited enhanced catalytic activity for the reduction of substituted benzaldehydes and arylaliphatic aldehydes to primary alcohols. Notably, these novel engineered dehydrogenases also catalyzed the reductive amination of a variety of aldehydes and ketones with excellent enantioselectivity, thus exhibiting a dual AmDH/ADH activity. We envisioned that the catalytic bi-functionality of these enzymes could be applied for the direct conversion of alcohols into amines. As a proof-of-principle, we performed an unprecedented one-pot “hydrogen-borrowing” cascade to convert benzyl alcohol to benzylamine using a single enzyme. Conducting the same biocatalytic cascade in the presence of cofactor recycling enzymes (i.e., NADH-oxidase and formate dehydrogenase) increased the reaction yields. In summary, this work provides the first examples of enzymes showing “alcohol aminase” activity.
- Tseliou, Vasilis,Schilder, Don,Masman, Marcelo F.,Knaus, Tanja,Mutti, Francesco G.
-
supporting information
p. 3315 - 3325
(2020/12/11)
-
- Self-regulated catalysis for the selective synthesis of primary amines from carbonyl compounds
-
Most current processes for the general synthesis of primary amines by reductive amination are performed with enormously excessive amounts of hazardous ammonia. It remains unclear how catalysts should be designed to regulate amination reaction dynamics at a low ammonia-to-substrate ratio for the quantitative synthesis of primary amines from the corresponding carbonyl compounds. Herein we show a facile control of the reaction selectivity in the layered boron nitride supported ruthenium catalyzed reductive amination reaction. Specifically, locating ruthenium to the edge surface of layered boron nitride leads to an increased hydrogenation activity owing to the enhanced interfacial electronic effects between ruthenium and the edge surface of boron nitride. This enables self-accelerated reductive amination reactions which quantitatively synthesize structurally diverse primary amines by reductive amination of carbonyl compounds with twofold ammonia. This journal is
- Fan, Xiaomeng,Gao, Jin,Gao, Mingxia,Jia, Xiuquan,Ma, Jiping,Xu, Jie
-
supporting information
p. 7115 - 7121
(2021/09/28)
-
- Synthesis method of p-fluorobenzylamine
-
The invention discloses a synthesis method of p-fluorobenzylamine, wherein the synthesis method specifically comprises the following steps: smoothly and sequentially adding methanol, p-fluorobenzaldehyde, sodium carbonate and hydroxylamine hydrochloride into a reaction kettle, and continuously stirring until the materials are uniformly mixed; and after uniformly mixing, stirring for 2.0 hours at the temperature of 30 DEG C, fully reacting to obtain an intermediate I, and carrying out hydrogenation reduction on the intermediate I to obtain a finished product p-fluorobenzylamine. In conclusion, the total yield of the finished product p-fluorobenzylamine prepared by the method is not lower than 90%, and the purity is not lower than 99.5%; therefore, compared with the prior art, the method has the following beneficial effects that the process is simple, the raw materials are easy to obtain, the reaction yield is high, the product purity is high, generation of dimer and generation of defluorination impurity benzylamine are avoided, generation of three wastes, especially generation of waste gas ammonia gas, is greatly reduced, and the method is clean and environmentally friendly.
- -
-
Paragraph 0006; 0013; 0016-0018; 0021-0023; 0026-0027
(2021/06/13)
-
- Method for preparing primary amine by catalytically reducing nitrile compounds through nano-porous palladium catalyst
-
The invention belongs to the technical field of heterogeneous catalysis, and provides a method for preparing primary amine by catalytically reducing nitrile compounds with a nano-porous palladium catalyst. According to the invention, aromatic and aliphatic nitrile compounds are adopted as raw materials, nano-porous palladium is adopted as a catalyst, ammonia borane is adopted as a hydrogen source, no additional additive is added, and selective hydrogenation is performed to prepare the corresponding primary amine. The method provided by the invention has the beneficial effects of mild reaction conditions, no additive, environmental protection, no need of hydrogen, simple operation, stable hydrogen source, safety, harmlessness, high conversion rate, high selectivity and good catalyst stability, and makes industrialization possible.
- -
-
Paragraph 0089-0092
(2021/05/29)
-
- Manganese catalyzed selective hydrogenation of cyclic imides to diols and amines
-
Herein we report the selective hydrogenation of cyclic imides to diols and amines, homogeneously catalyzed for the first time by a complex of an earth-abundant metal, a manganese pincer complex. A plausible catalytic cycle is proposed based on informative mechanistic experiments.
- Das, Uttam Kumar,Janes, Trevor,Kumar, Amit,Milstein, David
-
supporting information
p. 3079 - 3082
(2020/06/19)
-
- Synthesis of oxalamides by acceptorless dehydrogenative coupling of ethylene glycol and amines and the reverse hydrogenation catalyzed by ruthenium
-
A sustainable, new synthesis of oxalamides, by acceptorless dehydrogenative coupling of ethylene glycol with amines, generating H2, homogeneously catalyzed by a ruthenium pincer complex, is presented. The reverse hydrogenation reaction is also accomplished using the same catalyst. A plausible reaction mechanism is proposed based on stoichiometric reactions, NMR studies, X-ray crystallography as well as observation of plausible intermediates.
- Ben-David, Yehoshoa,Diskin-Posner, Yael,Milstein, David,Zhou, Quan-Quan,Zou, You-Quan
-
p. 7188 - 7193
(2020/07/23)
-
- Nickel(ii) and nickel(0) complexes as precursors of nickel nanoparticles for the catalytic hydrogenation of benzonitrile
-
The use of the nickel(ii) complex [(TEEDA)NiCl2] (1; TEEDA= N,N,N′,N′-tetraethyl-ethylendiamine) and nickel(0) complex [Ni(COD)2] (5) as pre-catalysts in the additive-free catalytic hydrogenation of benzonitrile (BN) is reported. In the presence of 1 (1 mol%), BN was hydrogenated under relatively mild reaction conditions (100 °C, 120 psi H2, 72 h) to the corresponding secondary imine, N-benzylidenebenzylamine (BBA), in very good yield (83%). As a counterpart, 5 (1 mol%) selectively hydrogenated BN to benzylamine (BA) in excellent yield (96%) under similar reaction conditions (80 °C, 120 psi H2, 24 h). In both cases, nickel nanoparticles (Ni-NPs) were identified as the catalytically active species. These Ni-NPs were formed in situ from 1 and 5 without external additives or additional stabilizers. The use of complex 5 was extended to the hydrogenation of different (hetero) aromatic and aliphatic nitriles.
- Rodríguez, Alejandro A.,Gardu?o, Jorge A.,García, Juventino J.
-
p. 1082 - 1089
(2020/01/31)
-
- Ambient-Temperature Synthesis of Primary Amines via Reductive Amination of Carbonyl Compounds
-
Efficient synthesis of primary amines via low-temperature reductive amination of carbonyl compounds using NH3 and H2 as the nitrogen and hydrogen resources is highly desired and challenging in the chemistry community. Herein, we employed naturally occurring phytic acid as a renewable precursor to fabricate titanium phosphate (TiP)-supported Ru nanocatalysts with different reduction degrees of RuO2 (Ru/TiP-x, x represents the reduction temperature) by combining ball milling and molten-salt processes. Very interestingly, the obtained Ru/TiP-100 had good catalytic performance for the reductive amination of carbonyl compounds at ambient temperature, resulting from the synergistic cooperation of the support (TiP) and the Ru/RuO2 with a suitable proportion of Ru0 (52%). Various carbonyl compounds could be efficiently converted into the corresponding primary amines with high yields. More importantly, the conversion of other substrates with reducible groups could also be achieved at ambient temperature. Detailed investigations indicated that the partially reduced Ru and the support (TiP) were indispensable. The high activity and selectivity of Ru/TiP-100 catalyst originates from the relatively high acidity and the suitable electron density of metallic Ru0.
- Xie, Chao,Song, Jinliang,Hua, Manli,Hu, Yue,Huang, Xin,Wu, Haoran,Yang, Guanying,Han, Buxing
-
p. 7763 - 7772
(2020/08/21)
-
- The Synthesis of Primary Amines through Reductive Amination Employing an Iron Catalyst
-
The reductive amination of ketones and aldehydes by ammonia is a highly attractive method for the synthesis of primary amines. The use of catalysts, especially reusable catalysts, based on earth-abundant metals is similarly appealing. Here, the iron-catalyzed synthesis of primary amines through reductive amination was realized. A broad scope and a very good tolerance of functional groups were observed. Ketones, including purely aliphatic ones, aryl–alkyl, dialkyl, and heterocyclic, as well as aldehydes could be converted smoothly into their corresponding primary amines. In addition, the amination of pharmaceuticals, bioactive compounds, and natural products was demonstrated. Many functional groups, such as hydroxy, methoxy, dioxol, sulfonyl, and boronate ester substituents, were tolerated. The catalyst is easy to handle, selective, and reusable and ammonia dissolved in water could be employed as the nitrogen source. The key is the use of a specific Fe complex for the catalyst synthesis and an N-doped SiC material as catalyst support.
- B?umler, Christoph,Bauer, Christof,Kempe, Rhett
-
p. 3110 - 3114
(2020/06/01)
-
- Facile synthesis of controllable graphene-co-shelled reusable Ni/NiO nanoparticles and their application in the synthesis of amines under mild conditions
-
The primary objective of many researchers in chemical synthesis is the development of recyclable and easily accessible catalysts. These catalysts should preferably be made from Earth-abundant metals and have the ability to be utilised in the synthesis of pharmaceutically important compounds. Amines are classified as privileged compounds, and are used extensively in the fine and bulk chemical industries, as well as in pharmaceutical and materials research. In many laboratories and in industry, transition metal catalysed reductive amination of carbonyl compounds is performed using predominantly ammonia and H2. However, these reactions usually require precious metal-based catalysts or RANEY nickel, and require harsh reaction conditions and yield low selectivity for the desired products. Herein, we describe a simple and environmentally friendly method for the preparation of thin graphene spheres that encapsulate uniform Ni/NiO nanoalloy catalysts (Ni/NiO?C) using nickel citrate as the precursor. The resulting catalysts are stable and reusable and were successfully used for the synthesis of primary, secondary, tertiary, and N-methylamines (more than 62 examples). The reaction couples easily accessible carbonyl compounds (aldehydes and ketones) with ammonia, amines, and H2 under very mild industrially viable and scalable conditions (80 °C and 1 MPa H2 pressure, 4 h), offering cost-effective access to numerous functionalized, structurally diverse linear and branched benzylic, heterocyclic, and aliphatic amines including drugs and steroid derivatives. We have also demonstrated the scale-up of the heterogeneous amination protocol to gram-scale synthesis. Furthermore, the catalyst can be immobilized on a magnetic stirring bar and be conveniently recycled up to five times without any significant loss of catalytic activity and selectivity for the product.
- Cui, Zhibing,Liu, Jianguo,Liu, Qiying,Ma, Longlong,Singh, Thishana,Wang, Chenguang,Wang, Nan,Zhu, Yuting
-
supporting information
p. 7387 - 7397
(2020/11/19)
-
- Method for preparing primary amine by catalyzing reductive amination of aldehyde ketone compounds
-
The invention discloses a method for preparing primary amine by catalyzing reductive amination of aldehyde ketone compounds. The method comprises the following steps: 1) mixing nickel nitrate hexahydrate, citric acid and an organic solvent, carrying out heating and stirring until a colloidal material is obtained, drying the colloidal material, roasting the colloidal material in a protective atmosphere, pickling, washing and drying a roasted product, and performing a partial oxidation reaction on a dried product in an oxygen-nitrogen mixed atmosphere to obtain a catalyst for a reductive amination reaction; and 2) mixing aldehyde or ketone compounds, a methanol solution of ammonia and the reductive amination reaction catalyst, introducing hydrogen, and carrying out a reductive amination reaction. The method has the advantages of high primary amine yield, high selectivity, wide aldehyde ketone substrate range, short reaction time, mild reaction conditions, low cost, greenness, economicalperformance and the like; the used reductive amination reaction catalyst can be recycled more than 10 times, and the catalytic activity of the catalyst is not obviously changed in gram-level reactions; and the method is suitable for large-scale application.
- -
-
Paragraph 0027-0030; 0051-0055
(2020/05/30)
-
- A State-of-the-Art Heterogeneous Catalyst for Efficient and General Nitrile Hydrogenation
-
Cobalt-doped hybrid materials consisting of metal oxides and carbon derived from chitin were prepared, characterized and tested for industrially relevant nitrile hydrogenations. The optimal catalyst supported onto MgO showed, after pyrolysis at 700 °C, magnesium oxide nanocubes decorated with carbon-enveloped Co nanoparticles. This special structure allows for the selective hydrogenation of diverse and demanding nitriles to the corresponding primary amines under mild conditions (e.g. 70 °C, 20 bar H2). The advantage of this novel catalytic material is showcased for industrially important substrates, including adipodinitrile, picolinonitrile, and fatty acid nitriles. Notably, the developed system outperformed all other tested commercial catalysts, for example, Raney Nickel and even noble-metal-based systems in these transformations.
- Formenti, Dario,Mocci, Rita,Atia, Hanan,Dastgir, Sarim,Anwar, Muhammad,Bachmann, Stephan,Scalone, Michelangelo,Junge, Kathrin,Beller, Matthias
-
supporting information
p. 15589 - 15595
(2020/10/02)
-
- PROCESS FOR PREPARATION OF HALOGENATED BENZYLAMINE AND INTERMEDIATES THEROF
-
The present invention provides an improved process for the preparation of halogenated benzylamine having the formula I from halogenated benzonitriles, Formula I wherein, X1 is selected from group consisting of hydrogen, chloro or fluoro, provided atleast one X1 is chloro or fluoro.
- -
-
Page/Page column 17-18
(2020/08/13)
-
- Scope and limitations of reductive amination catalyzed by half-sandwich iridium complexes under mild reaction conditions
-
The conversion of aldehydes and ketones to 1° amines could be promoted by half-sandwich iridium complexes using ammonium formate as both the nitrogen and hydride source. To optimize this method for green chemical synthesis, we tested various carbonyl substrates in common polar solvents at physiological temperature (37 °C) and ambient pressure. We found that in methanol, excellent selectivity for the amine over alcohol/amide products could be achieved for a broad assortment of carbonyl-containing compounds. In aqueous media, selective reduction of carbonyls to 1° amines was achieved in the absence of acids. Unfortunately, at Ir catalyst concentrations of 1 mM in water, reductive amination efficiency dropped significantly, which suggest that this catalytic methodology might be not suitable for aqueous applications where very low catalyst concentration is required (e.g., inside living cells).
- Nguyen, Dat P.,Sladek, Rudolph N.,Do, Loi H.
-
supporting information
(2020/07/15)
-
- Manganese catalyzed hydrogenation of carbamates and urea derivatives
-
We report the hydrogenation of carbamates and urea derivatives, two of the most challenging carbonyl compounds to be hydrogenated, catalyzed for the first time by a complex of an earth-abundant metal. The hydrogenation reaction of these CO2-derived compounds, catalyzed by a manganese pincer complex, yields methanol in addition to amine and alcohol, which makes this methodology a sustainable alternative route for the conversion of CO2 to methanol, involving a base-metal catalyst. Moreover, the hydrogenation proceeds under mild pressure (20 bar). Our observations support a hydrogenation mechanism involving the Mn-H complex. A plausible catalytic cycle is proposed based on informative mechanistic experiments.
- Das, Uttam Kumar,Kumar, Amit,Ben-David, Yehoshoa,Iron, Mark A.,Milstein, David
-
supporting information
p. 12962 - 12966
(2019/08/26)
-
- Nitrogen-Doped Carbon-Supported Nickel Nanoparticles: A Robust Catalyst to Bridge the Hydrogenation of Nitriles and the Reductive Amination of Carbonyl Compounds for the Synthesis of Primary Amines
-
An efficient method was developed for the synthesis of primary amines either from the hydrogenation of nitriles or reductive amination of carbonyl compounds. The reactions were catalyzed by nitrogen-doped mesoporous carbon (MC)-supported nickel nanoparticles (abbreviated as MC/Ni). The MC/Ni catalyst demonstrated high catalytic activity for the hydrogenation of nitriles into primary amines in high yields (81.9–99 %) under mild reaction conditions (80 °C and 2.5 bar H2). The MC/Ni catalyst also promoted the reductive amination of carbonyl compounds for the synthesis of primary amines at 80 °C and 1 bar H2. The hydrogenation of nitriles and the reductive amination proceeded through the same intermediates for the generation of the primary amines. To the best of our knowledge, no other heterogeneous non-noble metal catalysts have been reported for the synthesis of primary amines under mild conditions, both from the hydrogenation of nitriles and reductive amination.
- Zhang, Yangmin,Yang, Hanmin,Chi, Quan,Zhang, Zehui
-
p. 1246 - 1255
(2019/03/07)
-
- Preparation of nitrogen-doped carbon supported cobalt catalysts and its application in the reductive amination
-
The use of non-noble metal catalysts with high activity is of great importance for organic transformations. Herein, nitrogen-doped carbon supported cobalt catalysts with high surface area up to 981.2 m2/g were prepared via the simple pyrolysis of cobalt coordinated organic polymers with silica as the hard template. The pyrolysis temperature showed a great effect on the structure and properties of the as-prepared catalysts. The Co@NC-800 catalyst with the pyrolysis temperature of 800 °C demonstrated a high activity for the selective reductive amination of carbonyl compounds to primary amines with ammonia and hydrogen. Structurally-diverse primary amines with yields in the range from 81.8% to 100% were attained under the optimal conditions. The Co@NC-800 catalyst could be reused without the loss of its activity. The Co@NC-800 catalyst demonstrated comparable activity as the reported heterogeneous noble metal catalysts.
- Yuan, Ziliang,Liu, Bing,Zhou, Peng,Zhang, Zehui,Chi, Quan
-
p. 347 - 356
(2019/01/24)
-
- Reusable Nickel Nanoparticles-Catalyzed Reductive Amination for Selective Synthesis of Primary Amines
-
The preparation of nickel nanoparticles as efficient reductive amination catalysts by pyrolysis of in situ generated Ni-tartaric acid complex on silica is presented. The resulting stable and reusable Ni-nanocatalyst enables the synthesis of functionalized and structurally diverse primary benzylic, heterocyclic and aliphatic amines starting from inexpensive and readily available carbonyl compounds and ammonia in presence of molecular hydrogen. Applying this Ni-based amination protocol, -NH2 moiety can be introduced in structurally complex compounds, for example, steroid derivatives and pharmaceuticals.
- Murugesan, Kathiravan,Beller, Matthias,Jagadeesh, Rajenahally V.
-
supporting information
p. 5064 - 5068
(2019/03/19)
-
- Cobalt pincer complexes for catalytic reduction of nitriles to primary amines
-
Various cobalt pincer type complexes 1-6 were applied for the catalytic hydrogenation of nitriles to amines. Among these, catalyst 4 is the most efficient, allowing the reduction of aromatic as well as aliphatic nitriles in moderate to excellent yields.
- Schneek?nig, Jacob,Tannert, Bianca,Hornke, Helen,Beller, Matthias,Junge, Kathrin
-
p. 1779 - 1783
(2019/04/27)
-
- Green and convenient protocols for the efficient reduction of nitriles and nitro compounds to corresponding amines with NaBH4 in water catalyzed by magnetically retrievable CuFe2O4 nanoparticles
-
Abstract: In this study, firstly, CuFe2O4 nanoparticles were prepared by a simple operation. The structure of the mentioned nanoparticles was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma-optical emission spectrometry, vibrating sample magnetometer and also Brunauer–Emmett–Teller and Barrett–Joyner–Halenda analyses. The prepared magnetically copper ferrite nanocomposite was successfully applied as a simple, cost-effective, practicable, and recoverable catalyst on the green, highly efficient, fast, base-free, and ligand-free reduction of nitriles and also on the affordable and eco-friendly reduction of nitro compounds with the broad substrate scope to the corresponding amines with NaBH4 in water at reflux in high to excellent yields. Graphical abstract: [Figure not available: see fulltext.].
- Zeynizadeh, Behzad,Mohammad Aminzadeh, Farkhondeh,Mousavi, Hossein
-
-
- Method for preparing primary amines through hydrogen transfer selective nitrile reduction
-
The invention discloses a method for preparing primary amines through hydrogen transfer selective nitrile reduction. The method includes the step of adding low-price copper, iron and other metal saltsor low-price easy-to-obtain iodine elementary substances as additives with a nitrile compound as the raw material and oxazole borane as the hydrogen transfer agent under the mild conditions, therebypromoting the hydrogen transfer reaction and selectively synthesizing a series of corresponding primary amines under different conditions respectively. The high yield and high selectivity are achievedin the reaction. The oxazole borane is obtained through reaction of alkamine and a tetrahydrofuran complex of borane. In addition, the method is mild in reaction condition, easy to operate, free of high-pressure devices, environmentally friendly and high in raw material general applicability, the agents required for the reaction are all low in price and easy to obtain, the reduction product is only primary amines, and selectivity and repeatability are high. Thus, an effective scheme is provided for the industrial production of other high-additional-value compounds of similar structures in future.
- -
-
Paragraph 0057-0059
(2019/05/02)
-
- Mild palladium-catalysed highly efficient hydrogenation of CN, C-NO2, and CO bonds using H2 of 1 atm in H2O
-
Here we present the first example of a mild and high-efficiency protocol enabling a process in water using 1 atm of H2 for the efficient and selective hydrogenation of nitriles, nitro compounds, ketones, and aldehydes to yield primary amines and alcohols with satisfactory yields of up to >99%. Several palladium-based nanoparticle catalysts were prepared from K2PdCl4 and ligands, and one of them was found to be the best and most suitable for the hydrogenation of CN, C-NO2, and CO bonds. In addition, the catalyst Pd-NPs can be easily recycled and reused without losing their activity and selectivity. A plausible mechanism for the hydrogenation of a CN bond was also proposed, representing the first example that possesses great potential for sustainable industrial purposes.
- Liu, Yaxu,He, Shaopo,Quan, Ziyi,Cai, Huizhuo,Zhao, Yang,Wang, Bo
-
supporting information
p. 830 - 838
(2019/02/27)
-
- Facile synthesis of supported Ru-Triphos catalysts for continuous flow application in selective nitrile reduction
-
The selective catalytic hydrogenation of nitriles represents an important but challenging transformation for many homogeneous and heterogeneous catalysts. Herein, we report the efficient and modular solid-phase synthesis of immobilized Triphos-type ligands in very high yields, involving only minimal work-up procedures. The corresponding supported ruthenium-Triphos catalysts are tested in the hydrogenation of various nitriles. Under mild conditions and without the requirement of additives, the tunable supported catalyst library provides selective access to both primary amines and secondary imines. Moreover, the first application of a Triphos-type catalyst in a continuous flow process is presented demonstrating high catalyst life-time over at least 195 hours without significant activity loss.
- Konrath, Robert,Heutz, Frank J.L.,Steinfeldt, Norbert,Rockstroh, Nils,Kamer, Paul C.J.
-
p. 8195 - 8201
(2019/09/19)
-
- Selective Hydrogenation of Cyclic Imides to Diols and Amines and Its Application in the Development of a Liquid Organic Hydrogen Carrier
-
Direct hydrogenation of a broad variety of cyclic imides to diols and amines using a ruthenium catalyst is reported here. We have applied this strategy toward the development of a new liquid organic hydrogen carrier system based on the hydrogenation of bis-cyclic imide that is formed by the dehydrogenative coupling of 1,4-butanediol and ethylenediamine using a new ruthenium catalyst. The rechargeable system has a maximum gravimetric hydrogen storage capacity of 6.66 wt%.
- Kumar, Amit,Janes, Trevor,Espinosa-Jalapa, Noel Angel,Milstein, David
-
supporting information
p. 7453 - 7457
(2018/06/08)
-
- Light Harvesting for Rapid and Selective Reactions: Click Chemistry with Strain-Loadable Alkenes
-
Intramolecular strain is a powerful driving force for rapid and selective chemical reactions, and it is the cornerstone of strain-induced bioconjugation. However, the use of molecules with built-in strain is often complicated as a result of instability or selectivity issues. Here, we show that such strain, and subsequent cycloadditions, can be mediated by visible light via the harvesting of photochemical energy. Through theoretical investigations and molecular engineering of strain-loadable cycloalkenes, we demonstrate the rapid chemoselective cycloaddition of alkyl azides with unstrained cycloalkenes via the transiently (reversibly) formed trans-cycloalkene. We assess this system via the rapid bioconjugation of azide-functionalized insulin. An attractive feature of this process is the cleavable nature of the linker, which makes a catch-and-release strategy possible. In broader terms, we show that conversion of photochemical energy to intramolecular ring strain is a powerful strategy that can facilitate complex chemical transformations, even in biomolecular systems. Probing, isolating, and/or manipulating biologically relevant macromolecules is central to the study of their function in living systems. However, the synthetic tools available for performing the chemistry necessary for such studies are often difficult to use or limited in utility. In the approach presented here, light is converted to molecular strain energy, which can in turn be used for performing rapid and highly selective chemistry on macromolecular systems. Because it involves chemically stable and chemoselective reactions, this research not only opens up new possibilities for biomolecular functionalization and manipulation but also promises to make such experiments accessible to a broader class of researchers. The central concept of strain-loadable alkenes is general and provides a firm foundation for light-activated chemistry in complex environments. Strain-loadable alkenes are cycloalkenes that, when irradiated in the presence of a visible-light-absorbing photocatalyst, undergo double-bond isomerization. Because of engineered geometrical constraints, this isomerization results in significant molecular strain. Weaver and colleagues exploit this strain to dramatically accelerate the cycloaddition with azides, which are otherwise unreactive, in mixed molecular environments.
- Singh, Kamaljeet,Fennell, Christopher J.,Coutsias, Evangelos A.,Latifi, Reza,Hartson, Steve,Weaver, Jimmie D.
-
supporting information
p. 124 - 137
(2018/01/17)
-
- A benzylamine synthetic method of the compound (by machine translation)
-
The invention discloses a compound of formula (V) indicated by the benzylamine compound synthetic methods: shown in formula (IV) of the phenmethyl nitrine as raw materials, in the boron tribromide, solvent A and gas B under the protection of the reduction reaction, after the reaction, the solvent C quenching, after treatment [...] (V) indicated by the benzylamine compound. Compared with the existing method, the invention adopts the mild reaction conditions of boron tribromide reagent, avoid the use of a metal catalyst, the operation is simple, the reaction yield is high. (by machine translation)
- -
-
Paragraph 0040; 0041; 0042
(2018/09/11)
-
- Bioproduction of benzylamine from renewable feedstocks via a nine-step artificial enzyme cascade and engineered metabolic pathways
-
Production of chemicals from renewable feedstocks has been an important task for sustainable chemical industry. Although microbial fermentation has been widely employed to produce many biochemicals, it is still very challenging to access non-natural chemicals. Two methods (biotransformation and fermentation) have been developed for the first bio-derived synthesis of benzylamine, a commodity non-natural amine with broad applications. Firstly, a nine-step artificial enzyme cascade was designed by biocatalytic retrosynthetic analysis and engineered in recombinant E. coli LZ243. Biotransformation of l-phenylalanine (60 mm) with the E. coli cells produced benzylamine (42 mm) in 70 % conversion. Importantly, the cascade biotransformation was scaled up to 100 mL and benzylamine was successfully isolated in 57 % yield. Secondly, an artificial biosynthesis pathway to benzylamine from glucose was developed by combining the nine-step cascade with an enhanced l-phenylalanine synthesis pathway in cells. Fermentation with E. coli LZ249 gave benzylamine in 4.3 mm concentration from glucose. In addition, one-pot syntheses of several useful benzylamines from the easily available styrenes were achieved, representing a new type of alkene transformation by formal oxidative cleavage and reductive amination.
- Zhou, Yi,Wu, Shuke,Mao, Jiwei,Li, Zhi
-
p. 2221 - 2228
(2018/10/20)
-
- Selective synthesis of mono- and di-methylated amines using methanol and sodium azide as C1 and N1 sources
-
A Ru(ii) complex mediated synthesis of various N,N-dimethyl and N-monomethyl amines from organic azides using methanol as a methylating agent is reported. This methodology was successfully applied for a one-pot reaction of bromide derivatives and sodium azide in methanol. Notably, by controlling the reaction time several N-monomethylated and N,N-dimethylated amines were synthesized selectively. The practical applicability of this tandem process was revealed by preparative scale reactions with different organic azides and synthesis of an anti-vertigo drug betahistine. Several kinetic experiments and DFT studies were carried out to understand the mechanism of this transformation.
- Chakrabarti, Kaushik,Mishra, Anju,Panja, Dibyajyoti,Paul, Bhaskar,Kundu, Sabuj
-
supporting information
p. 3339 - 3345
(2018/07/29)
-
- A high performance catalyst of shape-specific ruthenium nanoparticles for production of primary amines by reductive amination of carbonyl compounds
-
The creation of metal catalysts with highly active surfaces is pivotal to meeting the strong economic demand of the chemical industry. Specific flat-shaped pristine fcc ruthenium nanoparticles having a large fraction of atomically active {111} facets exposed on their flat surfaces have been developed that act as a highly selective and reusable heterogeneous catalyst for the production of various primary amines at exceedingly high reaction rates by the low temperature reductive amination of carbonyl compounds. The high performance of the catalyst is attributed to the large fraction of metallic Ru serving as active sites with weak electron donating ability that prevail on the surface exposed {111} facets of flat-shaped fcc Ru nanoparticles. This catalyst exhibits a highest turnover frequency (TOF) of ca. 1850 h-1 for a model reductive amination of biomass derived furfural to furfurylamine and provides a reaction rate approximately six times higher than that of an efficient and selective support catalyst of Ru-deposited Nb2O5 (TOF: ca. 310 h-1).
- Chandra, Debraj,Inoue, Yasunori,Sasase, Masato,Kitano, Masaaki,Bhaumik, Asim,Kamata, Keigo,Hosono, Hideo,Hara, Michikazu
-
p. 5949 - 5956
(2018/07/25)
-
- Cobalt complex, preparation method thereof, and application thereof in selective catalysis of transfer hydrogenation reaction of cyano group
-
The invention discloses a cobalt complex, a preparation method thereof, and an application thereof in the selective catalysis of a transfer hydrogenation reaction of a cyano group. The structural formula of the cobalt complex is represented by formula I. The cobalt complex is prepared through a reaction of a cobalt salt and an NNP ligand or a PNP ligand under the protection of an inert atmosphere;and the chemical formula of the cobalt salt is CoX12, wherein X1 represents halogen, a sulfate radical, a perchlorate radical, a hexafluorophosphate radical, a hexafluoroantimonate radical, a tetrafluoroborate radical, a trifluoromethanesulfonate radical or a tetra(pentafluorophenyl)borate radical. The cobalt complex can be used in the selective catalysis of the transfer hydrogenation reaction ofthe cyano group to obtain a primary amine compound, a secondary amine compound and a tertiary amine compound, the primary amine compound, the secondary amine compound and the tertiary amine compoundare important intermediates in a series of subsequent functionalizing reactions, and the cobalt complex has a very high catalysis activity, and has great research values and a great application prospect.
- -
-
Paragraph 0157-0160
(2018/05/07)
-
- Cobalt-based nanoparticles prepared from MOF-carbon templates as efficient hydrogenation catalysts
-
The development of efficient and selective nanostructured catalysts for industrially relevant hydrogenation reactions continues to be an actual goal of chemical research. In particular, the hydrogenation of nitriles and nitroarenes is of importance for the production of primary amines, which constitute essential feedstocks and key intermediates for advanced chemicals, life science molecules and materials. Herein, we report the preparation of graphene shell encapsulated Co3O4- and Co-nanoparticles supported on carbon by the template synthesis of cobalt-terephthalic acid MOF on carbon and subsequent pyrolysis. The resulting nanoparticles create stable and reusable catalysts for selective hydrogenation of functionalized and structurally diverse aromatic, heterocyclic and aliphatic nitriles, and as well as nitro compounds to primary amines (>65 examples). The synthetic and practical utility of this novel non-noble metal-based hydrogenation protocol is demonstrated by upscaling several reactions to multigram-scale and recycling of the catalyst.
- Murugesan, Kathiravan,Senthamarai, Thirusangumurugan,Sohail, Manzar,Alshammari, Ahmad S.,Pohl, Marga-Martina,Beller, Matthias,Jagadeesh, Rajenahally V.
-
p. 8553 - 8560
(2018/11/30)
-
- Highly Stable COF-Supported Co/Co(OH)2 Nanoparticles Heterogeneous Catalyst for Reduction of Nitrile/Nitro Compounds under Mild Conditions
-
Ordered nanoporosity in covalent organic framework (COF) offers excellent opportunity for property development. Loading nanoparticles (nPs) onto them is one approach to introducing tailor-made properties into a COF. Here, a COF–Co/Co(OH)2 composite containing about 16 wt% of 2 nPs is prepared on a N-rich COF support that catalyzes the release of theoretical equivalence of H2 from readily available, safe, and cheap NaBH4. Furthermore, the released H2 is utilized for the hydrogenation of nitrile and nitro compounds to amines under ambient conditions in a facile one-pot reaction. The COF “by choice” is built from “methoxy” functionalized dialdehydes which is crucial in enabling the complete retention of the COF structure under the conditions of the catalysis, where the regular Schiff bonds would have hydrolyzed. The N-rich binding pockets in the COF ensure strong nP–COF interactions, which provides stability and enables catalyst recycling. Modeling studies reveal the crucial role played by the COF in exposing the active facets and thereby in controlling the activation of the reducing agent. Additionally, via density functional theory, we provide a rational explanation for how these COFs can stabilize nanoparticles which grow beyond the limiting pore size of the COF and yet result in a truly stable heterogeneous catalyst – a ubiquitous observation. The study underscores the versatility of COF as a heterogeneous support for developing cheap and highly active nonnoble metal catalysts.
- Mullangi, Dinesh,Chakraborty, Debanjan,Pradeep, Anu,Koshti, Vijay,Vinod, Chathakudath P.,Panja, Soumendranath,Nair, Sunil,Vaidhyanathan, Ramanathan
-
-
- Synthesis of cobalt nanoparticles by pyrolysis of Vitamin B12: A non-noble-metal catalyst for efficient hydrogenation of nitriles
-
A facile preparation of vitamin B12-derived carbonaceous cobalt particles supported on ceria is reported. The resulting composite material is obtained upon wet impregnation of ceria with natural cyanocobalamin and consecutive pyrolysis under inert conditions. The novel catalyst shows good to excellent performance in the industrially relevant heterogeneous hydrogenation of nitriles to the corresponding primary amines.
- Ferraccioli, Raffaella,Borovika, Diana,Surkus, Annette-Enrica,Kreyenschulte, Carsten,Topf, Christoph,Beller, Matthias
-
p. 499 - 507
(2018/02/07)
-
- Hydrogenation of Nitriles and Ketones Catalyzed by an Air-Stable Bisphosphine Mn(I) Complex
-
Efficient hydrogenations of nitriles and ketones with molecular hydrogen catalyzed by a well-defined bench-stable bisphosphine Mn(I) complex are described. These reactions are environmentally benign and atomically economic, implementing an inexpensive, earth-abundant nonprecious metal catalyst. A range of aromatic and aliphatic nitriles and ketones were efficiently converted into primary amines and alcohols, respectively, in good to excellent yields. The hydrogenation of nitriles proceeds at 100 °C with catalyst loading of 2 mol % and 20 mol % base (t-BuOK), while the hydrogenation of ketones takes place already at 50 °C, with a catalyst loading of 1 mol % and 5 mol % of base. In both cases, a hydrogen pressure of 50 bar was applied.
- Weber, Stefan,St?ger, Berthold,Kirchner, Karl
-
supporting information
p. 7212 - 7215
(2018/11/25)
-
- Versatile Dynamic Covalent Assemblies for Probing π-Stacking and Chirality Induction from Homotopic Faces
-
Herein we report for the first time the use of dynamic covalent reactions (DCRs) for building a π-stacking model system and further quantifying its substituent effects (SEs), which remain a topic of debate despite the rich history of stacking. A general DCR between 10-methylacridinium ion and primary amines was discovered, in which π-stacking played a stabilizing role. Facile quantification of SEs with in situ competing π-stacking systems was next achieved in the form of amine exchange exhibiting structural diversity by simply varying components. The linear correlation with σm in Hammett plots indicates the dominance of purely electrostatic SEs, and the additivity of SEs is in line with the direct interaction model. With α-chiral amines π-stacking within the adduct enabled chirality transfer from homotopic faces. The strategy of dynamic covalent assembly should be appealing to future research of probing weak interactions and manipulating chirality.
- Ye, Hebo,Hai, Yu,Ren, Yulong,You, Lei
-
supporting information
p. 3804 - 3809
(2017/03/27)
-
- Electronic Effect of Ruthenium Nanoparticles on Efficient Reductive Amination of Carbonyl Compounds
-
Highly selective synthesis of primary amines over heterogeneous catalysts is still a challenge for the chemical industry. Ruthenium nanoparticles supported on Nb2O5 act as a highly selective and reusable heterogeneous catalyst for the low-temperature reductive amination of various carbonyl compounds that contain reduction-sensitive functional groups such as heterocycles and halogens with NH3 and H2 and prevent the formation of secondary amines and undesired hydrogenated byproducts. The selective catalysis of these materials is likely attributable to the weak electron-donating capability of Ru particles on the Nb2O5 surface. The combination of this catalyst and homogeneous Ru systems was used to synthesize 2,5-bis(aminomethyl)furan, a monomer for aramid production, from 5-(hydroxymethyl)furfural without a complex mixture of imine byproducts.
- Komanoya, Tasuku,Kinemura, Takashi,Kita, Yusuke,Kamata, Keigo,Hara, Michikazu
-
supporting information
p. 11493 - 11499
(2017/08/30)
-
- MOF-derived cobalt nanoparticles catalyze a general synthesis of amines
-
The development of base metal catalysts for the synthesis of pharmaceutically relevant compounds remains an important goal of chemical research. Here, we report that cobalt nanoparticles encapsulated by a graphitic shell are broadly effective reductive amination catalysts. Their convenient and practical preparation entailed template assembly of cobaltdiamine- dicarboxylic acid metal organic frameworks on carbon and subsequent pyrolysis under inert atmosphere.The resulting stable and reusable catalysts were active for synthesis of primary, secondary, tertiary, and N-methylamines (more than 140 examples).The reaction couples easily accessible carbonyl compounds (aldehydes and ketones) with ammonia, amines, or nitro compounds, and molecular hydrogen under industrially viable and scalable conditions, offering cost-effective access to numerous amines, amino acid derivatives, and more complex drug targets.
- Jagadeesh, Rajenahally V.,Murugesan, Kathiravan,Alshammari, Ahmad S.,Neumann, Helfried,Pohl, Marga-Martina,Radnik, J?rg,Beller, Matthias
-
p. 326 - 332
(2017/09/28)
-
- Low-Pressure Hydrogenation of Nitriles to Primary Amines Catalyzed by Ruthenium Pincer Complexes. Scope and mechanism
-
The catalytic hydrogenation of nitriles to primary amines constitutes an environmentally benign and atom-economical methodology in synthetic organic chemistry. However, selective hydrogenation can be challenging, and usually elevated pressure and the use of various additives is required. Herein the hydrogenation of aromatic and aliphatic nitriles to form primary amines catalyzed by ruthenium pincer complexes is described. The reactions are conducted at low H2 pressure, low catalytic loadings and, in case of a variety of benzonitriles, under neutral conditions and without any additives. Mechanistic insight is provided.
- Mukherjee, Arup,Srimani, Dipankar,Ben-David, Yehoshoa,Milstein, David
-
p. 559 - 563
(2017/02/26)
-
- Selective Hydrogenation of Nitriles to Primary Amines by using a Cobalt Phosphine Catalyst
-
A general procedure for the catalytic hydrogenation of nitriles to primary amines by using a non-noble metal-based system is presented. Co(acac)3 in combination with tris[2-(dicyclohexylphosphino)ethyl]phosphine efficiently catalyzes the selective hydrogenation of a wide range of (hetero)aromatic and aliphatic nitriles to give the corresponding amines.
- Adam, Rosa,Bheeter, Charles Beromeo,Cabrero-Antonino, Jose R.,Junge, Kathrin,Jackstell, Ralf,Beller, Matthias
-
p. 842 - 846
(2017/03/17)
-
- Cobalt-Catalyzed and Lewis Acid-Assisted Nitrile Hydrogenation to Primary Amines: A Combined Effort
-
The selective hydrogenation of nitriles to primary amines using a bench-stable cobalt precatalyst under 4 atm of H2 is reported herein. The catalyst precursor was reduced in situ using NaHBEt3, and the resulting Lewis acid formed, BEt3, was found to be integral to the observed catalysis. Mechanistic insights gleaned from para-hydrogen induced polarization (PHIP) transfer NMR studies revealed that the pairwise hydrogenation of nitriles proceeded through a Co(I/III) redox process.
- Tokmic, Kenan,Jackson, Bailey J.,Salazar, Andrea,Woods, Toby J.,Fout, Alison R.
-
supporting information
p. 13554 - 13561
(2017/10/05)
-
- Small Molecule Inhibitors Simultaneously Targeting Cancer Metabolism and Epigenetics: Discovery of Novel Nicotinamide Phosphoribosyltransferase (NAMPT) and Histone Deacetylase (HDAC) Dual Inhibitors
-
Cancer metabolism and epigenetics are among the most intensely pursued research areas in anticancer drug discovery. Here we report the first small molecules that simultaneously inhibit nicotinamide phosphoribosyltransferase (NAMPT) and histone deacetylase (HDAC), two important targets of cancer metabolism and epigenetics, respectively. Through iterative structure-based drug design, chemical synthesis, and biological assays, a highly potent dual NAMPT and HDAC inhibitor was successfully identified. Compound 35 possessed excellent and balanced activities against both NAMPT (IC50 = 31 nM) and HDAC1 (IC50 = 55 nM). It could effectively induce cell apoptosis and autophagy and ultimately led to cell death. Importantly, compound 35 showed excellent in vivo antitumor efficacy in the HCT116 xenograft model. This proof-of-concept study demonstrates the feasibility of discovering an inhibitor targeting cancer metabolism and epigenetics and provides an efficient strategy for multitarget antitumor drug discovery.
- Dong, Guoqiang,Chen, Wei,Wang, Xia,Yang, Xinglin,Xu, Tianying,Wang, Pei,Zhang, Wannian,Rao, Yu,Miao, Chaoyu,Sheng, Chunquan
-
p. 7965 - 7983
(2017/10/18)
-
- Bifunctional N-Doped Co@C Catalysts for Base-Free Transfer Hydrogenations of Nitriles: Controllable Selectivity to Primary Amines vs Imines
-
The transfer hydrogenation of nitriles is an important and alternative strategy to produce primary amines or imines, both of which play a crucial role in the synthesis of fine chemicals and pharmaceuticals. Nevertheless, developing highly active bifunctional catalyst system with controllable selectivity for these reactions still remains a huge challenge. In this study, we presented a bifunctional N-doped Co@C catalyst system (Co@NC) for the selective transfer hydrogenation of nitriles into either primary amines or imines. The Co@NC was prepared by the direct pyrolysis of an N-containing Co-MOF under an inert atmosphere, where the N-containing ligands could be transformed into highly graphitic N-doped carbon, endowing the catalysts with high-density special basic sites, while the Co2+ ions were reduced to uniform Co nanoparticles which were dispersed on or embedded in N-doped graphitic structures. Under base-free conditions with isopropyl alcohol as both proton donor and solvent, the optimized Co@NC-900 (obtained at 900 °C) catalyst could convert nitriles into primary amines or imines at will with surprising selectivities (mostly higher than 90%), depending on the solvent volume added to the reaction systems. Furthermore, a possible reaction mechanism was proposed. The N-derived basic sites on Co@NC could play a role similar to that of the base additives, which not only inhibit the formation of polyamine or prevent the products stacked on the surface of catalysts but also effectively promote the transfer hydrogenation of nitriles. The generated corresponding primary imines could controllably attack the primary imine intermediates to form imines by adjusting the concentration of Co@NC. It is clear that this strategy offers a high-performance catalyst system for base-free transfer hydrogenations of nitriles to selectively produce primary amines vs imines.
- Long, Jilan,Shen, Kui,Li, Yingwei
-
p. 275 - 284
(2017/06/07)
-
- A fluorine animal pen amine astemizole pharmaceutical intermediates for the synthesis of (by machine translation)
-
The invention discloses a fluorine animal pen amine astemizole pharmaceutical intermediates of the synthesis method, the phenylacetic acid in methylene dichloride and armor phenolic ester in the mixed solution, adding N-(the 4 [...] phenylmethyl) phthalimide reflux reaction by heating, adding sulfurous acid monobasic potassium phosphate solution, cooling, adding sodium nitrate solution, filtered, the filtrate by adding 2, the 6 [...] two chloro -4 the solution of P-nitrophenol [...], with isopropanol solution to extract the 5 [...] 8 time, mix extracted solution, potassium bromide solution, desiccant dehydration, filtration, vacuum distillation, recrystallization in solution in acetonitrile, fluorine animal pen amine shall crystal to. Astemizole of the invention the synthesis of pharmaceutical intermediates fluorine animal pen amine method, does not need to access gas, simple reaction steps many, obviously improves the reaction yield, at the same time, the invention provides a new synthetic route, reaction yield in order to further enhance the basis of the good. (by machine translation)
- -
-
Paragraph 0024; 0025; 0026; 0027
(2017/09/13)
-
- A method for the production of primary amines
-
The invention relates to the field of chemical industry and particularly relates to a method for preparing primary amine by using the raw materials including halogenated hydrocarbon (or hydrocarbon alcohol sulfonate) and ammonia water (or formamide). The method comprises the following three steps: (1) imidization: 3,4-diarylfuran-2,5-diketone (I) reacts with ammonia (or formamide) and the like to obtain 3,4-diaryl-1H-pyrrole-2,5-diketone (II); (2) N-hydrocarbylation: 3,4-diaryl-1H-pyrrole-2,5-diketone (II) generates an N-hydrocarbylation reaction with halogenated hydrocarbon (or hydrocarbon alcohol sulfonate) in the presence of alkali to obtain N-hydrocarbyl-3,4-diaryl-1H-pyrrole-2,5-diketone (III); and (3) hydrolysis: N-hydrocarbyl-3,4-diaryl-1H-pyrrole-2,5-diketone (III) is subjected to alkali hydrolysis to obtain primary amine and the generated 2,3-diaryl maleate is subjected to acid treatment and automatic ring closing to form 3,4-diaryl furan-2,5-diketone (I) which is subjected to imidization and directly applied to the N-hydrocarbylation reaction. The method provided by the invention has the characteristics that the 3,4-diaryl furan-2,5-diketone can be circularly used at a high recovery rate, the molar ratio of the raw materials is low, and the yield of the product primary amine is high.
- -
-
Paragraph 0187
(2016/10/09)
-
- Unprecedented iron-catalyzed selective hydrogenation of activated amides to amines and alcohols
-
The first example of hydrogenation of amides homogeneously catalyzed by an earth-abundant metal complex is reported. The reaction is catalyzed by iron PNP pincer complexes. A wide range of secondary and tertiary N-substituted 2,2,2-trifluoroacetamides were hydrogenated to form amines and trifluoroethanol.
- Garg, Jai Anand,Chakraborty, Subrata,Ben-David, Yehoshoa,Milstein, David
-
supporting information
p. 5285 - 5288
(2016/05/02)
-
- SYNTHESIS OF AMIDES AND AMINES FROM ALDEHYDES OR KETONES BY HETEROGENEOUS METAL CATALYSIS
-
This invention concerns the first mild and efficient synthesis of primary amines and amides from aldehydes or ketones using a heterogeneous metal catalystand amine donor. The initial heterogeneous metal- catalyzed reaction between the carbonyl and the amine donor components is followed up with the addition of a suitable acylating agent component in one-pot. Hence, the present invention provides a novel catalytic one-pot three-component synthesis of amides. Moreover, the integration of enzyme catalysis allows for eco-friendly one-pot co-catalytic synthesis ofamides from aldehyde and ketone substrates, respectively. The process can be applied to the co-catalytic one-pot three-component synthesis of capsaicin and its analogues from vanillin or vanillyl alcohol. It can also be applied for asymmetric synthesis. In the present invention, a novel co-catalytic reductive amination/dynamic kinetic resolution (dkr) relay sequence for the asymmetric synthesis of optically active amides from ketones is disclosed. Moreover, implementation of a catalytic reductive amination/kinetic resolution (kr) relay sequence produces the corresponding optically active amide product and optical active primary amine product with the opposite stereochemistry from the starting ketones.
- -
-
Page/Page column 17
(2016/07/05)
-
- Integrated Heterogeneous Metal/Enzymatic Multiple Relay Catalysis for Eco-Friendly and Asymmetric Synthesis
-
Organic synthesis is in general performed using stepwise transformations where isolation and purification of key intermediates is often required prior to further reactions. Herein we disclose the concept of integrated heterogeneous metal/enzymatic multiple relay catalysis for eco-friendly and asymmetric synthesis of valuable molecules (e.g., amines and amides) in one-pot using a combination of heterogeneous metal and enzyme catalysts. Here reagents, catalysts, and different conditions can be introduced throughout the one-pot procedure involving multistep catalytic tandem operations. Several novel cocatalytic relay sequences (reductive amination/amidation, aerobic oxidation/reductive amination/amidation, reductive amination/kinetic resolution and reductive amination/dynamic kinetic resolution) were developed. They were next applied to the direct synthesis of various biologically and optically active amines or amides in one-pot from simple aldehydes, ketones, or alcohols, respectively.
- Palo-Nieto, Carlos,Afewerki, Samson,Anderson, Mattias,Tai, Cheuk-Wai,Berglund, Per,Córdova, Armando
-
p. 3932 - 3940
(2016/07/06)
-