cas 24994-04-5, 5-(4-Methylphenyl)-1H-tetrazole

Articles about 24994-04-5Total 152 be found

Article title
Article abstract
Author
Journal number and time
Download

KIT-6-anchored sulfonic acid groups as a heterogeneous solid acid catalyst for the synthesis of aryl tetrazoles
In the current study, a simple, environmentally benign and cost-effective method is presented for the preparation of 5-substituted-1H-aryltetrazoles. To this goal, mesoporous KIT-6 silica anchored with sulfonic acid (–SO3H) groups via post-grafting modification was synthesized using the sol–gel method and characterized by XRD, TGA, FTIR, BET, TEM and SEM techniques. For the preparation of tetrazole derivatives, the effect of various parameters such as catalyst amount, aryl nitrile:azide ratio, temperature and reaction time was tested. The hybrid organic/inorganic catalyst could be recovered easily through a simple filtration and reused multiple times without significant loss in activity.
Najafi Chermahini, Alireza,Andisheh, Nikzad,Teimouri, Abbas
p. 831 - 838
(2018)
Read Online

1-Disulfo-[2,2-bipyridine]-1,1-diium chloride ionic liquid as an efficient catalyst for the green synthesis of 5-substituted 1H-tetrazoles
A simple, green and efficient method has been developed for the synthesis of 5-substituted 1H-tetrazole derivatives through [2+3] cycloaddition reaction in good to excellent yields between various benzonitriles and sodium azide. For this purpose, 1-disulfo-[2,2-bipyridine]-1,1-diium chloride ([BiPy](HSO3)2Cl2) system as an ionic liquid catalyst have been extended for the construction of these valuable products. This procedure has significant advantages, including using ethylene glycol as a green solvent. The other advantages of this method are inexpensive and ease the preparation of the catalyst, mild reaction conditions, green reaction medium, easy workup, short reaction time, and simple experimental process.
Aali, Elaheh,Gholizadeh, Mostafa,Noroozi-Shad, Nazanin
(2021/08/30)

CuO–NiO bimetallic nanoparticles supported on graphitic carbon nitride with enhanced catalytic performance for the synthesis of 1,2,3-triazoles, bis-1,2,3-triazoles, and tetrazoles in parts per million level
The unification of CuCl2·2H2O and NiCl2·6H2O with the support of graphitic carbon nitride yielded to form an efficient, synergistic, bimetallic nano-catalyst CuO–NiO@g-C3N4. FT-IR, SEM, TEM
Gajurel, Sushmita,Dam, Binoyargha,Bhushan, Mayank,Singh, L. Robindro,Pal, Amarta Kumar
(2021/12/09)

Oxidation/ MCR domino protocol for direct transformation of methyl benzene, alcohol, and nitro compounds to the corresponding tetrazole using a three-functional redox catalytic system bearing TEMPO/Co(III)-porphyrin/ Ni(II) complex
A redox catalytic system for oxidation-reduction reactions and the domino preparation of tetrazole compounds from nitro and alcohol precursors was designed, prepared and characterized by UV–vis, GPC, TGA, XRD, EDX, XPS, VSM, FE-SEM, TEM, DLS, BET, NMR, and ICP analyses. The catalyst was prepared via several successive steps by demetalation of chlorophyll b, copolymerization with acrylated TEMPO monomers, complexation with Ni and Co metals (In two different steps), then immobilized on magnetic nanoparticles. The presence of three functional groups including TEMPO, coordinated cobalt, and coordinated nickel in the catalyst, allowed the oxidation of various types of alcohols, alkyl benzenes as well as the reduction of nitro compounds by a single catalyst. All reactions yielded up to 97 % selectivity for oxidation and reduction reactions. Next, the ability of the catalyst to successfully convert alcohol, methyl benzenes and nitro to their corresponding tetrazoles was studied.
Mahmoudi, Boshra,Rostami, Amin,Kazemnejadi, Milad,Hamah-Ameen, Baram Ahmed
(2020/12/21)

Fe3O4@L-lysine-Pd(0) organic–inorganic hybrid: As a novel heterogeneous magnetic nanocatalyst for chemo and homoselective [2 + 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles
An efficient and sustainable synthetic protocol has been presented to synthesis and 5-substituted 1H-tetrazole privileged heterocyclic substructures. The synthetic protocol involves two-component reaction between aryl nitriles and NaN3 in water using complex of L-lysine-palladium nanoparticles (NPs) modified Fe3O4 nanoparticles as magnetically separable, recyclable, and reusable heterogeneous catalyst. Magnetically retrievable L-lysine-Pd(0) modified Fe3O4 nanoparticles were applied in [2 + 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles. The advantages of this strategy include easy recovery and efficient reusability of the expensive Pd NPs, obtaining high yields of [2 + 3] cycloaddition, short reaction times, and all of the reported synthetic strategies are being performed in water as green solvent for a wide range of substrates.
Ashraf, Muhammad Aqeel,Liu, Zhenling,Li, Cheng,Zhang, Dangquan
(2020/12/23)

An efficient Cu/functionalized graphene oxide catalyst for synthesis of 5-substituted 1H-tetrazoles
The copper nanoparticles (Cu NPs) and amide functionalized graphene oxide (Cu-Amd-RGO) catalyst were prepared. This prepared catalyst (Cu-Amd-RGO) used for the synthesis of tetrazole derivatives. The catalyst (Cu-Amd-RGO) was characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction analysis (XRD). The average particle size of Cu was found to be 7.6?nm. The Cu-Amd-RGO catalyst exhibited excellent catalytic activity and recyclability for synthesis of tetrazoles.
Kulkarni, Padmakar A.,Satpati, Ashis Kumar,Thandavarayan, Maiyalagan,Shendage, Suresh S.
p. 2891 - 2899
(2021/02/12)

The mineral alum: an effective and low-cost heterogeneous catalyst for the successful synthesis of 5-substituted-1H-tetrazoles
A simple, efficient, and green procedure for the synthesis of 5-substituted-1H-tetrazoles via [3 + 2] cycloaddition reaction of nitriles with sodium azide is described. The reaction was catalyzed by natural and mesoporous alum nanoparticles (NPs) in DMSO
Karimian, Azam,Emarloo, Nahid,Salari, Samira
p. 91 - 100
(2020/06/01)

Practical scale up synthesis of carboxylic acids and their bioisosteres 5-substituted-1H-tetrazoles catalyzed by a graphene oxide-based solid acid carbocatalyst
Herein, catalytic application of a metal-free sulfonic acid functionalized reduced graphene oxide (SA-rGO) material is reported for the synthesis of both carboxylic acids and their bioisosteres, 5-substituted-1H-tetrazoles. SA-rGO as a catalytic material incorporates the intriguing properties of graphene oxide material with additional benefits of highly acidic sites due to sulfonic acid groups. The oxidation of aldehydes to carboxylic acids could be efficiently achieved using H2O2as a green oxidant with high TOF values (9.06-9.89 h?1). The 5-substituted-1H-tetrazoles could also be effectively synthesized with high TOF values (12.08-16.96 h?1). The synthesis of 5-substituted-1H-tetrazoles was corroborated by single crystal X-ray analysis and computational calculations of the proposed reaction mechanism which correlated well with experimental findings. Both of the reactions could be performed efficiently at gram scale (10 g) using the SA-rGO catalyst. SA-rGO displays eminent reusability up to eight runs without significant decrease in its productivity. Thus, these features make SA-rGO riveting from an industrial perspective.
Mittal, Rupali,Kumar, Amit,Awasthi, Satish Kumar
p. 11166 - 11176
(2021/03/31)

Synthesis of 5-Substituted 1H-Tetrazoles Catalyzed by M-SAPO-34 (M = Co, Cu, Mn, Fe, and V) Nanostructures
Abstract: The synthesis of 5-substituted 1H-tetrazoles by use of a series of M-SAPO-34 (M = Co, Cu, Mn, Fe, and V) nanocatalysts are presented. Following the optimized conditions, Co-SAPO-34 nanocatalyst has been found to effectively catalyze the 5-substi
Baghershiroudi, Mahrokh,Bafandeh, Fereshteh Taghipour,Safa, Kazem D.,Panahi, Parvane Nakhostin
p. 230 - 236
(2021/04/09)

Catalytic conversion of 2,4,5-trisubstituted imidazole and 5-substituted 1H-tetrazole derivatives using a new series of half-sandwich (η6-p-cymene)Ruthenium(II) complexes with thiophene-2-carboxylic acid hydrazone ligands
A new series of half-sandwich (η6-p-cymene) ruthenium(II) complexes with thiophene-2-carboxylic acid hydrazide derivatives [Ru(η6-p-cymene)(Cl)(L)] [L = N'-(naphthalen-1-ylmethylene)thiophene-2-carbohydrazide (L1), N'-(anthracen-9-ylmethylene)thiophene-2-carbohydrazide (L2) and N'-(pyren-1-ylmethylene)thiophene-2-carbohydrazide (L3)] were synthesized. The ligand precursors and their Ru(II) complexes (1–3) were structurally characterized by spectral (IR, UV–Vis, NMR and mass spectrometry) and elemental analysis. The molecular structures of the ruthenium(II) complexes 1–3 were determined by single-crystal X-ray diffraction. All complexes were used as catalysts for the one-pot three-component syntheses of 2,4,5-trisubstitued imidazole and 5-substituted 1H-tetrazole derivatives. The catalytic studies optimized parameters as solvent, temperature and catalyst. The catalysts revealed very active for a broad range of aromatic aldehydes presenting either electron attractor or electron donor substituents and, although less active, moderate to high activities were observed for alkyl aldehydes.
Vinoth, Govindasamy,Indira, Sekar,Bharathi, Madheswaran,Archana, Govindhasamy,Alves, Luis G.,Martins, Ana M.,Shanmuga Bharathi, Kuppannan
(2020/11/16)

Sustainable and recyclable magnetic nanocatalyst of 1,10-phenanthroline Pd(0) complex in green synthesis of biaryls and tetrazoles using arylboronic acids as versatile substrates
A magnetic nanocatalyst was purveyed as a heterogeneous recoverable palladium-based catalyst anchored on green, sustainable and phosphine free support. Resulted Fe3O4@SiO2-Phen-Pd(0) nanocatalyst bearing powerful phenanthroline ligand was thoroughly characterized by physicochemical approaches like UV–vis, FT-IR, EDX, XRD, TGA, ICP, VSM, DLS, FESEM, and TEM analyses. After finding trustable data, the obtained magnetic catalyst was considered to be applied in the Suzuki-Miyaura type C-C couplings and getting corresponding tetrazoles using arylboronic acid derivatives as alternate precursors of aromatic halides and stupendous data were observed.
Bagherzadeh, Nastaran,Sardarian, Ali Reza,Eslahi, Hassan
(2021/04/02)

Magnetic nitrogen-doped carbon derived from silk cocoon biomass: a promising and sustainable support for copper
In this study, a magnetic nitrogen-doped carbon-based copper (MNC-Cu) catalyst was fabricated so that natural silk cocoons undergo thermal processes and then activate by combining with Fe3O4 MNPs as a suitable substrate for placement copper metal. The efficiency of the generated catalyst in the synthesis of 5-substituted 1H-tetrazole derivatives was evaluated by the [3 + 2] cycloaddition reaction of aromatic aldehydes, azide ions, and hydroxylamines. FT-IR, FE-SEM, EDS, TEM, XRD, TGA, and VSM techniques have been adopted to identify and validate this heterogeneous catalyst. The observation from EDS, elemental mapping, XRD, and FT-IR analysis confirms the immobilization of Cu metals on the MNC surface and uniform distribution of species and then no aggregation occurs during functionalization. VSM results show the magnetic feature of fabricated catalyst, and based on the leaching test, the amount of catalyst leaching was negligible. Moreover, this reaction is a one-pot multicomponent reaction (MCRs) or more precisely a one-pot, three-component reaction, which is one of the advantages of this work. The fabricated catalyst shows high efficiency, good stability, and considerable reactivity in synthesizing 5-substituted 1H-tetrazole derivatives. So it can be seen that the fabricated magnetic catalyst is a useful and practical catalyst for synthesizing [3 + 2] cycloaddition reactions. Reusability and recyclability for five sequential runs without notable increase and reduction in activity are other advantages. In addition, the magnetic properties of this heterogeneous catalyst led to easy and quickly recovered and striking copper leaching. Graphical abstract: [Figure not available: see fulltext.]
Akbarzadeh, Parisa,Koukabi, Nadiya,Tahmasbi, Marzieh
(2021/12/01)

Novel Hybrid Thioamide Ligand Supported Copper Nanoparticles on SBA-15: A Copper Rich Robust Nanoreactor for Green Synthesis of Triazoles and Tetrazoles in Water Medium
Abstract: In this work, a new thioamide based ligand with reductive nature was designed for modification of mesoporous SBA-15. For this purpose, the channels of SBA-15 were modified with Tris(2-aminoethyl)amine (TAEA) groups and then reacted with S8 and phenyl acetylene to form thioamide groups via Willgerodt-Kindler reaction. This porous material proved to be an effective host for the immobilization of inexpensive Cu(II) ions. The catalytically active Cu(I) species were generated automatically due to the reductive nature of thioamide modified surface of catalyst without use of any toxic reducing agents. The well stabilized Cu(I) species into the nano-channels of SBA-15 were used for synthesis of various triazoles from sodium azide, phenyl acetylene and alkyl/benzyl halides or alkyl epoxides and various tetrazoles from sodium azide and aryl/alkyl nitriles under green mild aqueous reaction conditions. This catalytic system was used for 9 and 11 consecutive runs for synthesis of triazoles and tetrazoles, respectively. Graphic Abstract: [Figure not available: see fulltext.]
Pourhassan, Fatemeh,Eshghi, Hossein
p. 1287 - 1300
(2019/11/21)

Copper coordinated-poly(α-amino acid) decorated on magnetite graphene oxide as an efficient heterogeneous magnetically recoverable catalyst for the selective synthesis of 5- and 1-substituted tetrazoles from various sources: A comparative study
In this work, poly(α-amino acid)-Cu(II) complex immobilized on magnetite graphene oxide (GO/Fe3O4?PAA-Cu-complex) was prepared via a multistep synthesis and employed as an efficient, heterogeneous, magnetically recyclable nanocatalyst for one-pot, three component synthesis of 5- and 1-substituted tetrazoles using different substrates including benzaldehydes, benzonitriles, and anilines in mild conditions. The different approaches were mechanically investigated and compared. The catalyst was fully characterized by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), energy dispersive X-ray spectroscopy (EDX), inductively coupled plasma (ICP), FE-SEM and TEM analyses. The magnetic nanocatalyst could be readily separated from the reaction mixture by an external magnet and reused for several times without significant loss of catalytic activity. Also, the spectroscopic analysis revealed the stability and durability of the catalyst. Finally, the chemoselectivity of the method was investigated by the various combinations of aldehyde, nitrile, and oxime.
Kazemnejadi, Milad,Mahmoudi, Boshra,Sharafi, Zeinab,Nasseri, Mohammad A.,Allahresani, Ali,Esmaeilpour, Mohsen
(2019/12/15)

Methionine-Coated Fe3O4 Nanoparticles: An Efficient and Reusable Nanomagnetic Catalyst for the Synthesis of 5-Substituted 1H-Tetrazoles
Abstract: Methionine-coated Fe3O4 nanoparticles, a magnetically reusable and environmentally friendly heterogeneous catalyst, was synthesized. The new catalyst was characterized by FT-IR spectra, XRD, SEM, and EDX analysis and was us
Abbasi, R.,Karimian, A.,Namvar-Mhaboub, M.
p. 1646 - 1653
(2020/10/22)

A robust and recyclable ionic liquid-supported copper(II) catalyst for the synthesis of 5-substituted-1H-tetrazoles using microwave irradiation
Abstract: A novel and robust ionic liquid-supported copper(II) catalyst has been developed and explored for the efficient synthesis of 5-substituted-1H-tetrazoles using microwave irradiation. The ionic liquid-supported catalyst facilitated the efficient isolation of tetrazole products with high purity by simple extraction with organic solvent. Recovered ionic liquid-supported copper(II) catalyst could be recycled for three times for the synthesis of tetrazole products with high purity. This synthetic protocol offers a very clean, convenient, and microwave-assisted environment-friendly method for the efficient synthesis of 5-substituted-1H-tetrazoles with high yield. Graphic abstract: [Figure not available: see fulltext.].
Padmaja,Chanda, Kaushik
p. 1307 - 1317
(2019/11/14)

Synthesis of 5-Substituted 1 H-Tetrazoles from Nitriles by Continuous Flow: Application to the Synthesis of Valsartan
An efficient continuous flow process for the synthesis of 5-substituted 1H-tetrazoles is described. The process involves the reaction between a polymer-supported triorganotin azide and organic nitriles. The polymer-supported organotin azide, which is in situ generated with a polystyrene-supported triorganotin alkoxide and trimethylsilylazide, is immobilized in a packed bed reactor. This approach is simple, fast (it takes from 7.5 to 15 min), and guarantees a low concentration of tin residues in the products (5 ppm). The process was developed to aryl-, heteroaryl-, and also alkylnitriles and was applied for the synthesis of valsartan, an angiotensin II receptor antagonist.
Carpentier, Florian,Felpin, Fran?ois-Xavier,Zammattio, Fran?oise,Le Grognec, Erwan
p. 752 - 761
(2020/03/13)

One-Pot Suzuki-Hydrogenolysis Protocol for the Modular Synthesis of 2,5-Diaryltetrazoles
2,5-Diaryltetrazoles are a diverse range of compounds of considerable interest within the field of photochemistry as a valuable precursor of the nitrile imine 1,3-dipole. Current literature approaches toward this heterocycle remain unsuitable for the prac
Bertrand, Sophie,Jamieson, Craig,Livingstone, Keith
p. 7413 - 7423
(2020/07/07)

5-Aryltetrazoles from Direct C-H Arylation with Aryl Bromides
A mild, direct C-H arylation of 1-substituted tetrazoles to 5-aryltetrazoles is developed using a Pd/Cu cocatalytic system with readily available aryl bromides. The methodology avoids late-stage usage of azides and tolerates a wide range of functionalities.
Zhang, Yuan,Lee, Jack Chang Hung,Reese, Matthew R.,Boscoe, Brian P.,Humphrey, John M.,Helal, Christopher J.
p. 5718 - 5723
(2020/05/19)

Highly active and reusable cu/c catalyst for synthesis of 5-substituted 1h-tetrazoles starting from aromatic aldehydes
A new, efficient and convenient method for the synthesis of 5-substituted 1H-tetrazole derivatives with a wide range of substituents in good to excellent yields has been developed. The synthesis was performed by the one-pot three-component [3+2]cycloaddit
Khalifeh, Reza,Khalili, Dariush,Rastegar, Najme
p. 1044 - 1052
(2021/06/07)

Anchoring of Cu (II)-Schiff base complex on magnetic mesoporous silica nanoparticles: catalytic efficacy in one-pot synthesis of 5-substituted-1H-tetrazoles, antibacterial activity evaluation and immobilization of α-amylase
Magnetic mesoporous silica nanocomposite, Fe3O4?MCM-41, was prepared and functionalized with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPS). Then Schiff base grafted nanoparticles were synthesized by the condensation of 5,5'-
Ahmadi, Ameneh,Azadi, Roya,Motamedi, Hossein,Sedaghat, Tahereh
(2020/03/11)

A 5 - substituted four nitrogen azole compound of synthetic method (by machine translation)
The invention discloses a 5 - substituted four nitrogen azole compound of synthetic method, the synthesis method of the process is as follows: to point pen in the autoclave (I) indicated by the nitrile compounds, sodium azide, nickel ferrite and carboxylic acid ammonium ion exchange resin, added with an organic solvent to the cyclization reaction, the reaction solution after the reaction is finished filter, pickling, desolvation and heavy after crystallization, as shown in formula (II) of the 5 - substituted tetrazole compounds, yield is 85 - 95%, purity ≥ 99%; Formula (I) in the formula (II), the substituent R1 Is phenyl, substituted phenyl, C1 - C3 alkyl or amino; substituted phenyl substituent is methyl, methoxy, F or nitro. The invention of 5 - substituted tetrazole compounds synthesis method, adopt the catalytic ferrous acid nickel and carboxylic acid ammonium ion exchange resin catalyst combination, the carboxylic acid [...], not only good general the reaction substrate, the reaction yield is high, and the catalyst is easily separated and recycled, the production cost is reduced and the three waste emissions. (by machine translation)
-
Paragraph 0016; 0017; 0021

(2019/04/04)

PYRIDINE BASED IONIC FLUORIDE FOR CATALYZING INDOLE AND TETRAZOLE FORMATION
A pyridine based ionic liquid with a fluoride counter anion which catalyzes Fischer indole reaction and click chemistry. Methods of preparing the ionic liquid, and methods of utilizing the ionic liquid as a catalyst to synthesize indoles/indolenines and tetrazoles are also provided.
-
Paragraph 0033; 0034; 0124-0127

(2020/01/02)

Catalytic Synthesis of 5-Substituted Tetrazoles: Unexpected Reactions and Products
Tetrazoles are incredibly useful organic molecules with a wide range of applications from medicinal chemistry as carboxylic acid isosteres to high energy density materials in space research. In an effort to develop an easy protocol for the synthesis of te
Wani, Mohmmad Y.,Silva, Manuela R.,Krishnakumar, Balu,Kumar, Santosh,Al-Bogami, Abdullah S.,Aqlan, Faisal M.,Sobral, Abilio J. F. N.
p. 1613 - 1621
(2019/04/26)

Tin-Catalyzed Synthesis of 5-Substituted 1H-Tetrazoles from Nitriles: Homogeneous and Heterogeneous Procedures
The preparation of 5-substituted 1H-tetrazoles was efficiently achieved by reaction of trimethylsilylazide with nitriles using a triorganotin alkoxide precatalyst. The reaction mechanism was first investigated using a homogeneous tributyltin derivative and was explored through experimental investigations and DFT calculations. A heterogeneous version was then developed using a polymer-supported organotin alkoxide and afforded an efficient method for the preparation of tetrazoles in high yields with an easy work-up and a residual tin concentration in the desired products compatible for pharmaceutical applications (less than 10 ppm). (Figure presented.).
Chrétien, Jean-Mathieu,Kerric, Gaelle,Zammattio, Fran?oise,Galland, Nicolas,Paris, Michael,Quintard, Jean-Paul,Le Grognec, Erwan
supporting information
p. 747 - 757
(2019/01/04)

Iron (III)-porphyrin Complex FeTSPP as an efficient catalyst for synthesis of tetrazole derivatives via [2?+?3]cycloaddition reaction in aqueous medium
The metal complex (5,10,15,20-tetrakis-(4-sulfonatophenyl)-porphyrin-iron (III) chloride (FeTSPP) was new employed in an environmentally benign protocol as an efficient catalyst for a “click” chemistry approach for the synthesis of tetrazole and guanindinyltetrazole derivatives via [2?+?3] cycloaddition reaction of nitriles and azide derivatives in aqueous medium. The synthesized compounds were obtained in excellent yield, short reaction times and a recoverable catalyst.
El-Remaily, Mahmoud Abd El Aleem Ali Ali,Elhady
(2019/06/08)

Synthesis of α-Aminonitriles and 5-Substituted 1H-Tetrazoles Using an Efficient Nanocatalyst of Fe3O4@SiO2–APTES-supported Trifluoroacetic Acid
Fe3O4@SiO2–APTES-supported trifluoroacetic acid nanocatalyst was used for the one-pot synthesis of α-aminonitriles via a three-component reaction of aldehydes (or ketones), amines, and sodium cyanide. This method produced a high yield of 75–96% using only a small amount of the catalyst (0.05?g) in EtOH at room temperature. The catalyst was also employed for the synthesis of 5-substituted 1H-tetrazoles from nitriles and sodium azide in EtOH at 80°C. The tetrazoles were produced with good-to-excellent yields in a short reaction time of 4?h. Both synthetic methods were carried out in the absence of an organic volatile solvent. Because the supported trifluoroacetic acid generated a solid acid on the surface, thus the acid corrosiveness was not a serious challenge. This heterogeneous nanocatalyst was magnetically recovered and reused several times without significant loss of catalytic activity.
Fatahi, Hosna,Jafarzadeh, Mohammad,Pourmanouchehri, Zahra
p. 2090 - 2098
(2019/07/05)

Impregnated copper ferrite on mesoporous graphitic carbon nitride: An efficient and reusable catalyst for promoting ligand-free click synthesis of diverse 1,2,3-triazoles and tetrazoles
Magnetic CuFe2O4/g-C3N4 hybrids were synthesized through a facile method and their catalytic performances were evaluated in click chemistry for the first time. The structural and morphological characterization of prepared materials was carried out by different techniques such as X-ray diffraction, high-resolution transmission electron microscopy, field emission scanning electron microscopy, Fourier infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, and N2 adsorption–desorption analysis (Brunauer–Emmett–Teller surface area). The utilization of magnetic CuFe2O4/g-C3N4 enabled superior performance in the one-pot azide–alkyne cycloaddition reaction in water using alkyl halides and epoxides as azide precursors without the need of any additional agents. The present system is broad in scope and especially practical for the synthesis of macrocyclic triazoles and also tetrazoles. In addition, the catalytic system highly fulfills the demands of “green click chemistry” with its convenient conditions, especially easy access to a variety of significant products in low catalyst loading and simple work-up and isolation procedure.
Khalili, Dariush,Rezaee, Meysam
(2019/09/17)

Biosynthesis of Pd/MnO2 nanocomposite using Solanum melongena plant extract and its application for the one-pot synthesis of 5-substituted 1H-tetrazoles from aryl halides
In this work, for the first time, Solanum melongena plant extract was used for the green synthesis of Pd/MnO2 nanocomposite via reduction osf Pd(II) ions to Pd(0) and their immobilization on the surface of manganese dioxide (MnO2) nanoparticles (NPs) as an effective support. The synthesized nanocomposite were characterized by various analytical techniques such as Fourier transform infrared (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS) and UV–Vis spectroscopy. The catalytic activity of Pd/MnO2 nanocomposite was used as a heterogeneous catalyst for the one-pot synthesis of 5-substituted 1H-tetrazoles from aryl halides containing various electron-donating or electron-withdrawing groups in the presence of K4[Fe (CN)6] as non-toxic cyanide source and sodium azide. The products were obtained in good yields via a simple methodology and easy work-up. The nanocatalyst can be recycled and reused several times with no remarkable loss of activity.
Nasrollahzadeh, Mahmoud,Ghorbannezhad, Fatemeh,Sajadi, S. Mohammad
(2018/12/14)

Dendron-functionalized Fe3O4 magnetic nanoparticles with palladium catalyzed CN insertion of arylhalide for the synthesis of tetrazoles and benzamide
A novel method for the one-pot synthesis of 5-substituted 1H-tetrazoles and Benzamide from arylhalide containing in situ CN insertion from inorganic salt source was accomplished in presence of a new magnetically catalyst, palladium on surface-modified Schiff-Base complex. K2[Ni(CN)4] plays a role of nontoxic inorganic cyanide source in arylhalide Nucleophilic substitution. The synthesized Pd-Schiff-Base@Fe3O4MNPs was characterized by various techniques such as FT-IR, TGA, SEM, VSM, XRD, TEM, ICP-AES, EDX, BET and XPS. The nano structure catalyst was easily recovered by external magnetic field and reused several times without noticeable loss of its catalytic activity. Leaching study of Pd-Schiff-Base@Fe3O4 MNPs shows palladium strong bonded to different active parts of catalyst surface. Heterogeneity of this catalyst has been examined using hot filtration and ICP-AES techniques.
Karimi Zarchi, Mohammad Ali,Darbandizadeh Mohammad Abadi, Seyed Shahab Addin
p. 196 - 212
(2018/11/24)

Cationic organotin cluster [t-Bu2Sn(OH)(H2O)]2 2+2OTf?-catalyzed one-pot three-component syntheses of 5-substituted 1H-tetrazoles and 2,4,6-triarylpyridines in water
The cationic organotin cluster [t-Bu2Sn(OH)(H2O)]2 2+2OTf? is easy to prepare and stable in air. The catalytic activity of [t-Bu2Sn(OH)(H2O)]2 2+2OTf? as a neutral organotin Lewis acid catalyst is probed through the one-pot three-component syntheses of 5-substituted 1H-tetrazoles from aldehydes, hydroxylamine hydrochloride and sodium azide, and of 2,4,6-triarylpyridines from aromatic aldehydes, substituted acetophenones and ammonium acetate. The reactions proceed well in the presence of 1?mol% of [t-Bu2Sn(OH)(H2O)]2 2+2OTf? in water and provide the corresponding 5-substituted 1H-tetrazoles and 2,4,6-triarylpyridines in good to excellent yields. The method reported has several advantages such as the catalyst being neutral, low catalyst loading and use of water as a green solvent.
Wang, Hongshe,Zhao, Weixing,Du, Juan,Wei, Fenyan,Chen, Qi,Wang, Xiaomei
(2019/08/20)

Humic acid as an efficient and reusable catalyst for one pot three-component green synthesis of 5-substituted 1: H -tetrazoles in water
Humic acid is a non toxic, inexpensive, easily available high-molecular weight polymer. A simple and facile one pot three-component synthesis of 5-substituted 1H-tetrazoles from aldehydes, hydroxyamine hydrochloride and sodium azide using humic acid as an efficient catalyst in water is described. The method reported has several advantages such as high to excellent yields, easy work-up, mild reaction conditions, use of water as a green solvent, and a commercially available, nontoxic and reusable catalyst.
Wang, Hongshe,Wang, Yichun,Han, Yinfeng,Zhao, Weixing,Wang, Xiaomei
p. 784 - 789
(2020/01/23)

Copper(II)-faciliated synthesis of substituted thioethers and 5-substituted 1H-tetrazoles: Experimental and theoretical studies
Benzoylhydrazine based Schiff base-ligated two new copper(II) complexes, [Cu(L1)2] (1) and [Cu(L2)2] (2) were synthesized by the reaction of Cu(CH3COO)2·H2O with respective Schiff base ligand 1-[(4-nitrophenyl)ethylidene] benzohydrazide (HL1) or 1-[(4-methoxyphenyl)ethylidene] benzohydrazide (HL2). Both complexes were isolated as greenish solid and fully characterized by elemental analysis, FT-IR, EPR, thermo-gravimetric (TG) analysis and Cyclic Voltammetry. The molecular structures of both complexes have also been determined by single crystal X-ray crystallography, which confirmed the coordination of Schiff base ligands through N, O donor atoms and distorted square planar geometry around the Cu(II) ion. Both complexes were found to be good homogeneous catalysts for the synthesis of a wide range of substituted thioethers and 5-substituted 1H-tetrazoles in 92% and 93% yield, respectively, at a low catalyst loading (0.5 mol%). The bond angles and distances, as discerned from the DFT calculations, commusurated with the experimental findings. The energy difference between the HOMO and the LUMO, calculated from DFT studies, was found to be 5.645 eV and 6.459 eV for complex 1 and complex 2, respectively. These results are in harmony with the observed higher catalytic activity of complex 1.
Layek, Samaresh,Agrahari, Bhumika,Dey, Shuvankar,Ganguly, Rakesh,Pathak, Devendra D.
p. 194 - 206
(2019/06/24)

A Facile Approach to Catalyst-Free Cyanation and Azidation of a-Organic Compounds and a One-Pot Preparation of 5-Substituted 1 H-Tetrazoles by Using a Dimethyl Sulfoxide-Nitric Acid Combination
In this study, cyanations or azidations of imines were performed by using hydroxy(dimethyl)-λ 4-sulfanecarbonitrile or azido(dimethyl)-λ 4-sulfanol, respectively, prepared in situ by treatment of potassium cyanide or sodium azide with a dimethyl sulfoxide-nitric acid combination. Furthermore, a one-pot preparation of 5-substituted 1 H-tetrazole derivatives was carried out by using this reagent combination in the presence of an aldehyde, hydroxylamine hydrochloride, and sodium azide under mild conditions.
Alavi, Seyyedeh Ameneh,Kazemnejadi, Milad,Mahmoudi, Boshra,Nasseri, Mohammad Ali
supporting information
p. 2290 - 2294
(2019/12/11)

Tandem magnetization and post-synthetic metal ion exchange of metal–organic framework: Synthesis, characterization and catalytic study
For the first time, metal-exchange in a magnetic metal–organic framework (MOF) via tandem magnetization and post-synthetic modification has been developed. The new magnetic mixed-metal metal–organic framework nanocomposite, CoFe2O4/[
Yadollahi, Mahtab,Hamadi, Hosein,Nobakht, Valiollah
(2019/03/08)

Preparation of Ag-doped g-C3N4 Nano Sheet Decorated Magnetic γ-Fe2O3@SiO2 Core–Shell Hollow Spheres through a Novel Hydrothermal Procedure: Investigation of the Catalytic activity for A3, KA2 Coupling Reactions and [3?+?2] Cycloaddition
Taking advantageous of both g-C3N4 and magnetic core-shell hollow spheres, for the first time a heterogeneous and magnetically separable hybrid system was prepared through a novel and simple hydrothermal procedure and used for immobilization of bio-synthesized Ag(0) nanoparticles. The hybrid system was fully characterized by using SEM/EDS, FTIR, VSM, TEM, XRD, TGA, DTGA, ICP-AES, BET and elemental mapping analysis. The catalytic utility of the obtained system, h-Fe2O3@SiO2/g-C3N4/Ag, for promoting ultrasonic-assisted A3, KA2 coupling reactions and [3?+?2] cycloaddition has been confirmed. The results established that the catalyst could efficiently catalyze the reaction to afford the corresponding products in high yields in short reaction times. The reusability study confirmed that the catalyst could be recovered and reused for at least five reaction runs with only slight loss of the catalytic activity. The hot filtration test also proved low silver leaching, indicating the heterogeneous nature of the catalysis.
Sadjadi, Samahe,Malmir, Masoumeh,Heravi, Majid M.
(2018/07/31)

L -Proline: An Efficient Organocatalyst for the Synthesis of 5-Substituted 1 H -Tetrazoles via [3+2] Cycloaddition of Nitriles and Sodium Azide
A simple and efficient route for the synthesis of a series of 5-substituted 1 H -tetrazoles using l -proline as a catalyst from structurally diverse organic nitriles and sodium azide is reported. The prominent features of this environmentally benign, cost effective, and high-yielding l -proline-catalyzed protocol includes simple experimental procedure, short reaction time, simple workup, and excellent yields making it a safer and economical alternative to hazardous Lewis acid catalyzed methods. The protocol was successfully applied to a broad range of substrates, including aliphatic and aryl nitriles, organic thiocyanates, and cyanamides.
Bhagat, Saket B.,Telvekar, Vikas N.
supporting information
p. 874 - 879
(2018/02/16)

Urea mediated 5-substituted-1H-tetrazole via [3?+?2] cycloaddition of nitriles and sodium azide
A simple, new and convenient metal free procedure for the synthesis of 5-substituted 1H-tetrazoles using various nitriles and sodium azide in the presence of urea and acetic acid with good to high yields is developed. The reaction plausibly proceeds through in situ formation of urea azide active complex without toxic and/or expensive metal catalysts.
Yakambram,Jaya Shree,Srinivasula Reddy,Satyanarayana,Naveen,Bandichhor, Rakeshwar
supporting information
p. 445 - 449
(2018/01/03)

Engineering a Cu-MOF Nano-Catalyst by using Post-Synthetic Modification for the Preparation of 5-Substituted 1H-Tetrazoles
A new nano scale Cu-MOF has been obtained via post-synthetic metalation by immersing a Zn-MOF as a template in DMF solutions of copper(II) salts. The Cu-MOF serves as recyclable nano-catalyst for the preparation of 5-substituted 1H-tetrazoles via [3?+?2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post-synthetic metalated MOF were characterized by FT-IR spectroscopy, powder X-ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X-ray spectroscopy (EDX) techniques. The morphology and size of the nano-catalyst were determined by field emission scanning electron microscopy (FE-SEM).
Salahshournia, Behrang,Hamadi, Hosein,Nobakht, Valiollah
(2018/07/31)

Synthesis, molecular docking and xanthine oxidase inhibitory activity of 5-aryl-1H-tetrazoles
5-Aryl-1H-tetrazoles (1–24) were synthesized and screened for their xanthine oxidase (XO) inhibitory activity using allopurinol as standard inhibitor (IC50 = 2.0 ± 0.01 μM). Six compounds 3, 4, 5, 9, 21, and 24 exhibited significant to weak act
Fatima, Itrat,Zafar, Humaira,Khan, Khalid Mohammed,Saad, Syed Muhammad,Javaid, Sumaira,Perveen, Shahnaz,Choudhary, M. Iqbal
p. 201 - 211
(2018/05/24)

Synthesis of tetrazoles, triazoles, and imidazolines catalyzed by magnetic silica spheres grafted acid
The magnetically separable catalysts are used in the synthesis of N-containing heterocycles, including tetrazoles, triazoles, and imidazolines. The magnetic silica sphere grafted sulfonic acid (MSS-SO3H) is suitable for the synthesis of 1,2,3-triazole via the cycloaddition of nitroalkene with NaN3, whereas the zinc-modified silica sphere catalyst (MSS-SO3Zn) is more suitable for the synthesis of tetrazoles. The MSS-SO3Zn catalyst also works well for the synthesis of 2-substituted imidazoline via the condensation of nitriles with ethylenediamine. Both of the MSS-SO3H and MSS-SO3Zn catalysts can be recovered easily by a magnet, and they can be reused without further tedious activation.
Jiang, Ruihang,Sun, Hong-Bin,Li, Shuang,Zhan, Kun,Zhou, Junjie,Liu, Lei,Zhang, Kai,Liang, Qionglin,Chen, Zhangpei
supporting information
p. 2652 - 2662
(2018/11/26)

Facile one-pot preparation of 5-aryltetrazoles and 3-arylisoxazoles from aryl bromides
The successive treatment of aryl bromides with n-BuLi, DMF, hydroxylamine hydrochloride, and finally diphenylphosphoryl azide provided efficiently the corresponding 5-aryltetrazoles in good to moderate yields. Similarly, the successive treatment of aryl bromides with n-BuLi, DMF, hydroxylamine hydrochloride, and finally diethyl acetylenedicarboxylate and Oxone provided efficiently the corresponding diethyl 3-arylisoxazole-4,5-dicarboxylates in good to moderate yields. Aromatic aldoximes are the key intermediates in both reactions, and 5-aryltetrazoles and 3-arylisoxazoles could be obtained from aryl bromides in one pot under transition-metal-free conditions.
Kobayashi, Eiji,Togo, Hideo
p. 4226 - 4235
(2018/07/06)

A Practical Synthesis of 5-Substituted 1 H -Tetrazoles from Aldoximes Employing the Azide Anion from Diphenyl Phosphorazidate
5-Substituted 1 H -tetrazoles were effectively synthesized from aldoximes and diphenyl phosphorazidate (DPPA) under reflux conditions in xylenes. Various aldoximes underwent the cycloaddition reaction to afford the corresponding 5-substituted 1 H -tetrazoles in short reaction times and in good yields. Chiral aldoximes derived from amino acids also gave aminotetrazoles with almost no racemization.
Ishihara, Kotaro,Kawashima, Mayumi,Matsumoto, Takatoshi,Shioiri, Takayuki,Matsugi, Masato
p. 1293 - 1300
(2017/12/26)

Dendrimer-encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N-arylation of nitrogen heterocycles and green synthesis of 5-substituted 1H-tetrazoles
In this study, dendrimer-encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles were prepared via a multistep-synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), dynamic light scattering (DLS), UV-vis spectroscopy, energy dispersive X-ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by. FE-SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50?nm. Also, the amount of Cu is determined to be 0.51?mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano-compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N-arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one-pot, three-component reaction for the efficient and green synthesis of 5-substituted 1H-tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.
Esmaeilpour, Mohsen,Sardarian, Ali Reza,Firouzabadi, Habib
(2018/03/21)

One pot three-component synthesis of 5-substituted 1H-tetrazole from aldehyde
A versatile, robust and efficient strategy for the synthesis of vast range of highly functionalized 5-substituted 1H-tetrazole derivatives by using one pot three-component synthesis from various aldehydes, hydroxylamine hydrochloride and sodium azide in p
Mitra, Bijeta,Mukherjee, Suvodip,Pariyar, Gyan Chandra,Ghosh, Pranab
supporting information
p. 1385 - 1389
(2018/03/12)

Method for preparing tetrazole compound
The invention discloses a method for preparing a tetrazole compound. The tetrazole compound is synthesized/prepared from cyanobenzene or substituted cyanobenzene and sodium azide, which serve as raw materials, in a manner of taking dimethylformamide as a
-
Paragraph 0033; 0034; 0045; 0046

(2017/08/28)

Synthesis of 5-substituted-1H-tetrazole derivatives using monodisperse carbon black decorated Pt nanoparticles as heterogeneous nanocatalysts
A facile and highly efficient protocol for synthesis of new 5-substituted 1H-tetrazoles derivatives has been developed by the assistance of vulcan carbon decorated based on monodisperse platinum nanoparticles (Pt NPs@VC) as superior and recyclable heterog
Baskaya, Gaye,Esirden, Ibrahim,Erken, Esma,Sen, Fatih,Kaya, Muharrem
p. 1992 - 1999
(2017/01/28)

Diisopropylethylammonium acetate (DIPEAc): An efficient and recyclable catalyst for the rapid synthesis of 5-substituted-1H-tetrazoles
A simple and efficient protocol developed for the synthesis of 5-substituted 1H-tetrazole derivatives through [2+3] cycloaddition reaction between benzonitriles and sodium azide using diisopropylethylammonium acetate as a recyclable reaction medium is described. The reactions proceed well at 80 °C and provide the corresponding tetrazoles in good to excellent yields (up to 94% yield). Developed method has notable advantages, such as simple and mild conditions, easy workup, reusability with consistent catalytic activity, and safer alternative to hazardous, corrosive conventional Lewis acid catalysts.
Bhosle, Manisha R.,Shaikh, Dastgir S.,Khillare, Lalit D.,Deshmukh, Amarsinh R.,Mane, Ramrao A.
supporting information
p. 695 - 703
(2017/03/27)

The microwave-assisted synthesis of 5-substituted 1: H -tetrazoles via [3+2] cycloaddition over a heterogeneous Cu-based catalyst: Application to the preparation of 13N-labelled tetrazoles
The [3+2] cycloaddition between various nitriles and sodium azide proceeds smoothly in the presence of a new CuII catalyst in N-methyl-2-pyrrolidone (NMP) to give the corresponding 5-substituted 1H-tetrazoles. The desired tetrazoles were obtain
Joshi, Sameer M.,Mane, Rasika B.,Pulagam, Krishna R.,Gomez-Vallejo, Vanessa,Llop, Jordi,Rode, Chandrashekhar
p. 8084 - 8091
(2017/08/14)

Cu(II) immobilized on Fe3O4@APTMS-DFX nanoparticles: An efficient catalyst for the synthesis of 5-substituted 1: H -tetrazoles with cytotoxic activity
Cu(ii) immobilized on deferasirox loaded amine functionalized magnetic nanoparticles (Cu(ii)/Fe3O4@APTMS-DFX) as a novel magnetically recyclable heterogeneous catalyst is able to catalyze the [3 + 2] cycloaddition reactions of various organic nitriles with sodium azide. Using this method, a series of 5-substituted-1H-tetrazoles under mild conditions in DMSO were prepared. The reaction involves mild reaction conditions with efficient transformation capability. The developed catalyst could be easily separated by applying an external magnetic field. Furthermore, it could be recycled for 5 runs with negligible leaching of copper from the surface of the catalyst. The catalyst was characterized by various techniques such as FT-IR, TGA, VSM, SEM-EDX, and ICP-OES. Several derivatives of 1H-tetrazoles were prepared using this catalyst, and their structures were confirmed using different techniques. Then, the synthesized anthraquinones were evaluated for their cytotoxicity against several cell lines including MCF-7, MAD-MD-231, HT-29, HeLa, neuro-2a and L-929. The results obtained from the MTT assay revealed that the 6 derivatives exhibited a high level of cytotoxicity. In order to determine the cytotoxicity mechanism, 2 derivatives with the highest cytotoxic activity were selected, and an apoptosis assay was carried out by flow cytometry, which supported that apoptosis is the major mechanism.
Taghavi, Faezeh,Gholizadeh, Mostafa,Saljooghi, Amir Sh.,Ramezani, Mohammad
p. 1953 - 1964
(2017/10/27)