Dalton Transactions
Paper
which can be helpful to understand the formation mechan- 11 L. Ding, Y. Shu, A. Wang, M. Zheng, L. Li, X. Wang and
ism; the dispersions of the phosphides obtained from MOs/ T. Zhang, Appl. Catal., A, 2010, 385, 232–237.
P2O5 precursors were superior to those of phosphides prepared 12 R. Cheng, Y. Shu, M. Zheng, L. Li, J. Sun, X. Wang and
from the traditional precursors. Finally, it was suggested that T. Zhang, J. Catal., 2007, 249, 397–400.
the route might be feasible for large scale preparation of 13 M. Zheng, Y. Shu, J. Sun and T. Zhang, Catal. Lett., 2008,
phosphides and this aspect will be investigated in the future.
121, 90–96.
14 Z. W. Yao, H. Dong and Y. Shang, J. Alloys. Compd., 2009,
474, L10–L13.
15 S. T. Oyama, J. Catal., 2003, 216, 343–352.
16 R. Cheng, Y. Shu, M. Zheng, L. Li, J. Sun, X. Wang and
T. Zhang, J. Catal., 2007, 249, 397–400.
4. Conclusions
In summary, we developed a new MOs/P2O5 precursors for the
synthesis of Ni2P, Co2P and MoP phosphides via the H2 17 S. Carenco, D. Portehault, C. Boissière, N. Mézailles and
reduction method. Compared with the traditional precursors C. Sanchez, Chem. Rev., 2013, 113, 7981–8065.
obtained from metal salts and (NH4)2HPO4 via dissolution, 18 A. Wang, M. Qin, J. Guan, L. Wang, H. Guo, X. Li, Y. Wang
drying and calcination, this new type of precursor was pre-
pared only by simple mechanical mixing of starting materials.
and R. Prins, Angew. Chem., Int. Ed., 2008, 120, 6141–
6143.
Furthermore, the formation pathway of phosphides using the 19 J. Guan, Y. Wang, M. Qin, Y. Yang, X. Li and A. Wang,
precursors can be proposed as the MOs/P2O5 precursors shift- J. Solid State Chem., 2009, 182, 1550–1555.
ing to the phosphide products via metal, metal phosphate and 20 S. Yang, C. Liang and R. Prins, J. Catal., 2006, 237, 118–
metal oxide-phosphate intermediates. In addition, it was 130.
found that the dispersions of Ni2P, Co2P and MoP obtained 21 Y. Xie, H. L. Su, X. F. Qian, X. M. Liu and Y. T. Qian, J. Solid
from MOs/P2O5 precursors were superior to those of the State Chem., 2000, 149, 88–91.
corresponding phosphides prepared from the traditional pre- 22 Y. Ni, L. Jin and J. Hong, Nanoscale, 2011, 3, 196–200.
cursors. This was because the morphology of as-prepared 23 J. Park, B. Koo, K. Y. Yoon, Y. Hwang, M. Kang, J.-G. Park
metal phosphides might be inherited from corresponding
MOs.
and T. Hyeon, J. Am. Chem. Soc., 2005, 127, 8433–8440.
24 A. E. Henkes and R. E. Schaak, Chem. Mater., 2007, 19,
4234–4242.
25 E. Muthuswamy, G. H. L. Savithra and S. L. Brock, ACS
Nano, 2011, 5, 2402–2411.
26 L. Li and P. Reiss, J. Am. Chem. Soc., 2008, 130, 11588–
11589.
27 W.-S. Ojo, S. Xu, F. Delpech, C. Nayral and B. Chaudret,
Angew. Chem., Int. Ed., 2012, 51, 738–741.
Acknowledgements
We acknowledge the financial support from the National
Natural Science Foundation of China (No. 21276253).
28 W. Maneeprakorn, C. Q. Nguyen, M. A. Malik, P. O’Brien
and J. Raftery, Dalton Trans., 2009, 2103–2108.
29 S. Liu, X. Liu, L. Xu, Y. Qian and X. Ma, J. Cryst. Growth,
2007, 304, 430–434.
Notes and references
1 A.-M. Alexander and J. S. J. Hargreaves, Chem. Soc. Rev.,
2010, 39, 4388–4401.
30 X. Hu and J. C. Yu, Chem. Mater., 2008, 20, 6743–6749.
2 E. J. Popczun, J. R. McKone, C. G. Read, A. J. Biacchi, 31 A. Panneerselvam, M. A. Malik, M. Afzaal, P. O’Brien and
A. M. Wiltrout, N. S. Lewis and R. E. Schaak, J. Am. Chem.
Soc., 2013, 135, 9267–9270.
3 K. Y. Yoon, Y. Jang, J. Park, Y. Hwang, B. Koo, J.-G. Park
and T. Hyeon, J. Solid State Chem., 2008, 181, 1609–1613.
M. Helliwell, J. Am. Chem. Soc., 2008, 130, 2420–2421.
32 X. Wang, P. Clark and S. T. Oyama, J. Catal., 2002, 208,
321–331.
33 I. I. Abu and K. J. Smith, J. Catal., 2006, 241, 356–366.
4 X. C. Jiang, Q. H. Xiong, S. Nam, F. Qian, Y. Li and 34 V. Zuzaniuk and R. Prins, J. Catal., 2003, 219, 85–96.
C. M. Lieber, Nano Lett., 2007, 7, 3214–3218.
5 C. Stinner, R. Prins and Th. Weber, J. Catal., 2000, 191,
438–444.
6 X. Wang, P. Clark and S. T. Oyama, J. Catal., 2002, 208,
321–331.
35 Z. Yao, G. Wang, Y. Shi, Y. Zhao, J. Jiang, Y. Zhang and
H. Wang, Dalton Trans., 2015, 44, 14122–14129.
36 Z. Yao, M. Li, X. Wang, X. Qiao, J. Zhu, Y. Zhao, G. Wang,
J. Yin and H. Wang, Dalton Trans., 2015, 44, 5503–5509.
37 A. W. Burns, A. F. Gaudette and M. E. Bussell, J. Catal.,
2008, 260, 262–269.
7 Q. Guan and W. Li, J. Catal., 2010, 271, 413–415.
8 J. A. Cecilia, A. Infantes-Molina, E. Rodríguez-Castellón and 38 Q. Guan, X. Cheng, R. Li and W. Li, J. Catal., 2013, 299,
A. Jiménez-López, Appl. Catal., B, 2009, 92, 100–113. 1–9.
9 E. J. Popczun, C. G. Read, C. W. Roske, N. S. Lewis and 39 S. S.-Y. Lin, D. H. Kim, M. H. Engelhard and S. Y. Ha,
R. E. Schaak, Angew. Chem., Int. Ed., 2014, 126, 5531–5534. J. Catal., 2010, 273, 229–235.
10 L. Feng, H. Vrubel, M. Bensimon and X. Hu, Phys. Chem. 40 J. Chen, H. Shi, L. Li and K. Li, Appl. Catal., B, 2014, 144,
Chem. Phys., 2014, 16, 5917–5921.
870–884.
This journal is © The Royal Society of Chemistry 2016
Dalton Trans., 2016, 45, 1225–1232 | 1231