4672-29-1Relevant articles and documents
Self-assembled titanium phosphonate nanomaterial having a mesoscopic void space and its optoelectronic application
Pramanik, Malay,Patra, Astam K.,Bhaumik, Asim
, p. 5140 - 5149 (2013)
Here we report the synthesis of a new crystalline titanium phosphonate material (HTiP-7) having a self-assembled nanostructure and a mesoscopic void space without the aid of any surfactant or templating agent. The material has been synthesized hydrothermally through the reaction between benzene-1,3,5-triphosphonic acid (BTPA) and titanium(iv) isopropoxide at neutral pH at 453 K for 24 h. This hybrid phosphonate material has been thoroughly characterized by powder X-ray diffraction, N2 sorption, HR TEM, FE SEM, TG-DTA, FT IR and UV-Vis diffuse reflectance spectroscopic studies. Two very well-known software packages, REFLEX and CELSIZ unit cell refinement programs, are employed to establish the triclinic crystal phase of this hybrid material (HTiP-7). Very tiny nanocrystals of HTiP-7 self-aggregated to form spherical nanoparticles of dimension ca. 25 nm together with a mesoscopic void space and good BET surface area (255 m2 g-1). The framework is thermally stable up to 650 K. The material showed excellent carrier mobility for photocurrent generation in the presence of a photosensitizer molecule (Rose Bengal). To the best of our knowledge this is the first report of a photon-to-electron energy transfer process over a dye doped titanium phosphonate nanomaterial.
Two- and three-dimensional hydrogen-bonded networks built from 1,3,5-[(HO)2(O)P]3C6H3 and 4-(dimethylamino)pyridine
Mehring, Michael
, p. 3240 - 3246 (2004)
Crystallisation of 3,5-bis(phosphonophenyl)phosphonic acid, 1,3,5-[(HO)2(O)P]3C6H3, from MeOH/H2O in the presence of 4-(dirnethylamino)pyridine, 4-(Me 2N)C5H4N, gave [1-{(HO)2(O)P}-3,5- {(HO)(O)2P}2C6H3] 2-[{4-(Me2N)C5H4NH} +]2 (2) and [1,3-{(HO)2(O)P} 2-5-{(HO)(O)2P}C6H3] -[4-(Me2N)-C5H4NH]+ (3). Single-crystal X-ray diffraction analyses revealed a two- and a three-dimensional hydrogen-bonded network for compounds 2 and 3, respectively. Compound 2 is composed of layers which are formed by hydrogen-bonded motifs of the type R2,2(8) and R4,4(16). These motifs are connected within the layer by additional hydrogen bonds and the benzene spacer. The cation [4-(Me 2N)C5H4NH]+ is located between the layers and determines the interlayer separation of approximately 6.5 A. In compound 3 a layered network of the hydrogen-bonded building units R2,3(10) was observed. These units are interconnected by four additional hydrogen bonds within the network. The benzene spacer links the adjacent layers to give a three-dimensional structure. Within this network, channels with internal dimensions of ca. 8.5 × 11.3 A2 which are occupied by the [4-(Me2N)C5H4NH]+ cations were observed. Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2004.
Zirconium(IV)-Benzene Phosphonate Coordination Polymers: Lanthanide and Actinide Extraction and Thermal Properties
Luca, Vittorio,Tejada, Juan J.,Vega, Daniel,Arrachart, Guilhem,Rey, Cyrielle
supporting information, p. 7928 - 7943 (2016/08/24)
Coordination polymers with different P/(Zr + P) molar ratios were prepared by combining aqueous solutions of Zr(IV) and benzenephosphonate derivatives. 1,3,5-Benzenetrisphosphonic acid (BTP) as well as phosphonocarboxylate derivatives in which carboxylate substitutes one or two of the phosphonate groups were chosen as the building blocks. The precipitates obtained on combining the two solutions were not X-ray amorphous but rather were indicative of poorly ordered materials. Hydrothermal treatment did not alter the structure of the materials produced but did result in improved crystalline order. The use of HF as a mineralizing agent during hydrothermal synthesis resulted in the crystallization of at least three relatively crystalline phases whose structure could not be determined owing to the complexity of the diffraction patterns. Gauging from the similarity of the diffraction patterns of all the phases, the poorly ordered precipitates and crystalline materials appeared to have similar underlying structures. The BTP-based zirconium phosphonates all showed a higher selectivity for lanthanides and thorium compared with cations such as Cs+, Sr2+, and Co2+. Substitution of phosphonate groups by carboxylate groups did little to alter the pattern of selectivity implying that selectivity in the system was entirely determined by the -POH group with little influence from the -COOH groups. Samples with the highest phosphorus content showed the highest extraction efficiencies for lanthanide elements, especially the heavy lanthanides such as Dy3+ and Ho3+ with separation factors of around four with respect to La3+. In highly acid solutions (4 M HNO3) there was a pronounced variation in extraction efficiency across the lanthanide series. In situ, nonambient diffraction was performed on ZrBTP-0.8 loaded with Th, Ce, and a complex mixture of lanthanides. In all cases the crystalline Zr2P2O7 pyrophosphate phase was formed at ~800 °C demonstrating the versatility of this structure.
Self-assembled hybrid tinphosphonate nanoparticles with bimodal porosity: An insight towards the efficient and selective catalytic process for the synthesis of bioactive 1,4-dihydropyridines under solvent-free conditions
Pramanik, Malay,Bhaumik, Asim
, p. 11210 - 11220 (2013/09/23)
Self-assembled ordered mesoporous organic-inorganic hybrid tinphosphonate nanomaterial (HSnP-2) with crystalline framework structure has been synthesized through the reaction of benzene-1,3,5-triphosphonic acid (BTPA) and Sn(iv) chloride under hydrothermal conditions at 453 K in the absence of any structure directing agent. Powder XRD, FE-SEM, HR-TEM, N2 sorption, solid state 13C CP-MAS and 31P MAS NMR, TG-DTA analysis and FT-IR spectroscopic techniques are employed to characterize the material. The hexagonal crystal phase of the material is established through REFLEX and CELSIZ unit cell refinement programs. The calculated unit cell parameters of HSnP-2 are a = b = 17.515 A and c = 10.254 A. The material is composed of hexagonally ordered tiny nanocrystals of dimensions of ca. 4.0 nm and exhibits high BET surface area (380 m2 g-1), good thermal stability along with uniform supermicropores (ca. 1.3 nm) and an ordered assembly of mesopores. HSnP-2 shows outstanding catalytic activity and high recycling efficiency for the green and efficient one-pot three component coupling reaction for the synthesis of bioactive 1,4-dihydropyridines with excellent yields under solvent-free conditions. The novelty of this eco-friendly catalytic system is further manifested from the mild reaction temperature (333 K) and short reaction time (20 min), together with exclusive selectivity for the desired 1,4-dihydropyridines over 2-arylpyridines or 1,2-dihydopyridines.