9003-17-2Relevant articles and documents
Impact of composition and structural parameters on the catalytic activity of MFI type titanosilicalites
Bruk, Lev,Chernyshev, Vladimir,Khramov, Evgeny,Kravchenko, Galina,Kustov, Aleksander,Kustov, Leonid,Kuz'Micheva, Galina,Markova, Ekaterina,Pastukhova, Zhanna,Pirutko, Larisa
, p. 3439 - 3451 (2022/03/14)
Titanosilicalite of the MFI type was obtained via a hydrothermal method. Its initial and annealed at 75 °C (TS-1P(75)) and 500 °C (TS-1P(500)) forms were studied by X-ray powder diffraction (PXRD), X-ray absorption spectroscopy (XAS-method), Fourier-transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), temperature-programmed ammonia desorption (TPD NH3), and pyridine adsorption (Py). The full-profile Rietveld method allowed us to observe the presence of the organic template tetrapropylammonium hydroxide (TPAOH) in the framework voids, as well as to determine the silicate module (Si/Ti = 73.5) and the distribution of Ti4+ ions over the MFI-type structure sites (Ti atoms replace Si ones in two positions: T1 and T6). The coordination numbers of titanium (CNTi = 4.6 for TS-1P and TS-1P(75), CNTi = 3.8 for TS-1P(500)) were established by the XAS-method. The catalytic activity of titanosilicalites was found in the reactions of nitrous oxide decomposition (the maximal decomposition rate is demonstrated for the TS-1P(75) sample), allyl chloride epoxidation to epichlorohydrin (the best combination of all indicators was exhibited for the TS-1P sample) and propane conversion (maximum propane conversion, and butadiene and propylene selectivity were observed in both TS-1P(75) and TS-1P(500) samples). Mechanisms for the catalytic processes are proposed. The relationship between the catalytic properties and the composition (Si/Ti), Ti4+ ion distribution over the MFI-type structure sites, the local environment of titanium ions, and the number of acid sites in the titanosilicalites are discussed.
SUPPORTED TANTALUM CATALYST FOR THE PRODUCTION OF 1,3-BUTADIENE
-
Page/Page column 14-17, (2021/04/03)
The invention relates to a process for the production of 1,3-butadiene from a feed comprising ethanol and acetaldehyde in the presence of a supported tantalum catalyst obtainable by aqueous impregnation of the support with a water-soluble tantalum precursor. Furthermore, the present invention relates to a process for the production of a supported tantalum catalyst, and the supported tantalum catalyst. Finally, the invention relates to the use of the supported tantalum catalyst for the production of 1,3-butadiene from a feed comprising ethanol and acetaldehyde to increase one or both of selectivity and yield of the reaction.
Chemoenzymatic Buta-1,3-diene Synthesis from Syngas Using Biological Decarboxylative Claisen Condensation and Zeolite-Based Dehydration
Balasubramaniam, Sivaraman,Badle, Sneh,Badgujar, Swati,Veetil, Vinod P.,Rangaswamy, Vidhya
, p. 705 - 711 (2020/12/01)
A method for producing buta-1,3-diene (1,3-BD) by an amalgamation of chemical and biological approaches with syngas as the carbon source is proposed. Syngas is converted to the central intermediate, acetyl-CoA, by microorganisms through a tetrahydrofolate metabolism pathway. Acetyl-CoA is subsequently converted to malonyl-CoA using a carbonyl donor in the presence of a carboxylase enzyme. A decarboxylative Claisen condensation of malonyl-CoA and acetaldehyde ensues in the presence of acyltransferases to form 3-hydroxybutyryl-CoA, which is subsequently reduced by aldehyde reductase to give butane-1,3-diol (1,3-BDO). An ensuing dehydration step converts 1,3-BDO to 1,3-BD in the presence of a chemical dehydrating reagent.