Kinetic study of the liquid-phase selective hydrogenation of 1-Butyne (cas 107-00-6) in presence of 1-butene over a commercial palladium-based catalyst
-
Add time:08/22/2019 Source:sciencedirect.com
A kinetic investigation of the liquid-phase selective hydrogenation of 1-Butyne (cas 107-00-6) in presence of 1-butene was performed over a commercial palladium-based/alumina catalyst of the eggshell type. This investigation is aimed at validating a kinetic expression to describe 1-butyne hydrogenation under experimental conditions around the typical operating conditions of industrial C4 cuts hydrorefining processes. Seven levels of temperature between 27 °C and 62 °C were explored. 1-Butyne and n-butene initial mole fractions amounted to ca. 8% and 9% and hydrogen partial pressure was set between 0.85 atm and 7.82 atm. Experimental data and data analysis were extended to 1-butyne total conversion.Palladium proved to be quite selective towards 1-butyne hydrogenation. However, the intrinsic palladium selectivity is impaired by the presence in our experiments of severe intracatalyst diffusion limitations. This result turns the attention to the crucial influence of hydrogen partial pressure level on selectivity because unnecessary hydrogen excesses severely lessen selectivity when 1-butyne becomes the limiting reactant inside the catalyst.A kinetic expression of the Langmuir–Hinshelwood–Hougen–Watson type was proposed to describe the hydrogenation of 1-butyne. 1-Butene hydrogenation rate was described by a zero-order and first-order kinetic expression with respect to 1-butene and hydrogen, respectively.The kinetic model predicts experimental data with an average deviation of 17.1%. The relative inference intervals of the kinetic parameter estimates were less than ±14.8%.
▶ The high palladium selectivity is spoiled by the strong pore diffusion resistance. ▶ A kinetic expression of the Langmuir–Hinshelwood–Hougen–Watson type was validated. ▶ The kinetic model predicts experimental data with an average deviation of 17.1%. ▶ The inference intervals of the kinetic parameter estimates were less than ±14.8%.
We also recommend Trading Suppliers and Manufacturers of 1-Butyne (cas 107-00-6). Pls Click Website Link as below: cas 107-00-6 suppliers
Prev:Reaction dynamics of the phenyl radical (C6H5) with 1-Butyne (cas 107-00-6) (HCCC2H5) and 2-butyne (CH3CCCH3)
Next:Evaluation of 4-[18F]fluoro-1-Butyne (cas 107-00-6) as a radiolabeled synthon for click chemistry with azido compounds) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Synthesis and light-emitting properties of C60-containing poly(1-phenyl-1-Butyne (cas 107-00-6))s08/27/2019
- Kinetic studies on the hydrogenation of 1,3-butadiene, 1-Butyne (cas 107-00-6) and their mixtures08/26/2019
- Effect of 2-butyne-1, 4-diol on silver electrodeposition from 5, 5-dimethyl hydantoin solutions08/25/2019
- Kinetic study of the liquid-phase hydrogenation of 1-Butyne (cas 107-00-6) over a commercial palladium/alumina catalyst08/24/2019
- Evaluation of 4-[18F]fluoro-1-Butyne (cas 107-00-6) as a radiolabeled synthon for click chemistry with azido compounds08/23/2019
- Reaction dynamics of the phenyl radical (C6H5) with 1-Butyne (cas 107-00-6) (HCCC2H5) and 2-butyne (CH3CCCH3)08/21/2019
- Development of a multi-layer microreactor: Application to the selective hydrogenation of 1-Butyne (cas 107-00-6)08/20/2019
- A crossed molecular beams investigation of the reactions of atomic silicon (Si(3P)) with C4H6 isomers (1,3-butadiene, 1,2-butadiene, and 1-Butyne (cas 107-00-6))08/19/2019
- Application of a catalytic membrane reactor to the selective hydrogenation of 1-Butyne (cas 107-00-6)08/18/2019