- Copper-catalyzed oxidative esterification of alcohols with aldehydes activated by Lewis acids
-
An efficient oxidative esterification of aromatic and aliphatic aldehydes with simple alcohols was accomplished using catalytic amounts of Cu(ClO4)2·6H2O and InBr3 with tert-hydroperoxide as an oxidant.
- Yoo, Woo-Jin,Li, Chao-Jun
-
-
Read Online
- Alcoholysis of benzotrichloride studied by liquid beam - Multiphoton ionization technique
-
Chemical reactions of benzotrichloride in an alcohol solution initiated by multiphoton ionization were observed by irradiation of a tightly focused laser beam at wavelength of 274 nm. The product ions ejected from the liquid surface were analyzed by a time-of-flight mass spectrometer. The mass spectra of the ions indicate that alcoholysis occurs between PhCCl+2 produced by multiphoton ionization and alcohol molecules, ROH, giving PhCCl(OR)+ and PhC(OR)+2.
- Horimoto, Noriko,Mafune, Fumitaka,Kondow, Tamotsu
-
-
Read Online
- STUDY OF INTERMOLECULAR INTERACTIONS IN A SYSTEM FOR EQUILIBRIUM CATALYTIC TRANSESTERIFICATION OF ESTERS. 1. REACTION OF BORON, TITANIUM, AND ARSENIC BUTOXIDES WITH ESTERS ACCORDING TO IR FOURIER SPECTROSCOPIC DATA
-
IR spectroscopy was used to study solutions of esters of PHCOOR (R = Me, Bu, C7H15, (CH2)2OBu) in B(OBu)3, Ti(OBu)4, and As(OBu)3 and in mixtures of the latter with CCl4 and hexane.It is shown that weak complexes form between the ester molecules and B(OBu
- Komarova, L. I.,Lapina, N. N.,Lokshin, B. V.,Markova, G. D.,Vasnev, V. A.
-
-
Read Online
- Mechanism of Amine-Catalyzed Ester Formation from an Acid Chloride and Alcohol
-
Stopped-flow FT-IR spectroscopy has been used to study the amine-catalyzed reactions of benzoyl chloride with either butanol or phenol in dichloromethane at 0 °C. There is a paucity of detailed rate information available in the literature for this process. Our goal was to determine whether amine catalysis operated by a nucleophilic-, specific-base-, or general-base-catalyzed mechanism. A large isotope effect was observed for butanol versus butanol-O-d which is consistent with a general- base-catalyzed mechanism. Some anomalous rate dependencies on reactant concentration and the relative rate of benzoyl chloride loss versus butyl benzoate formation were observed. The analogous reaction of phenol was studied in more detailed. An overall reaction order of three, and a negligible isotope effect for phenol versus phenol-d6 are consistent with either a base- or nucleophilic-catalyzed mechanism. The most interesting result with phenol was a large sensitivity of the rate of phenyl benzoate formation on small structural changes in the amine (e.g., diethylmethylamine versus triethylamine). We observed the key intermediate (acylammonium salt) in the nucleophilic process via NMR for solutions of benzoyl chloride and amine in the absence of alcohol; however, we did not observe this intermediate in the IR during ester formation [with the exception of 4-(dimethylamino)- pyridine]. While we can rule out specific-base catalysis (no evidence for phenoxide intermediates), it is difficult to completely eliminate nucleophilic catalysis.
- Hubbard, Patricia,Brittain, William J.
-
-
Read Online
- Ligand free palladium catalyzed decarboxylative cross-coupling of aryl halides with oxalate monoester salts
-
Ligand free Pd-catalyzed decarboxylative cross-coupling of potassium oxalate monoester and derivatives with aryl iodides and bromides is described. Functionalized aromatic esters can be efficiently synthesized via this method with only 1.0 mol % Pd(OAc)2 catalyst without any phosphine ligand. This method illustrates an inexpensive and operationally simple method for the preparation of aromatic esters and acids, which is especially beneficial for a large scale synthesis.
- Li, Yan,Chen, Huan-Huan,Wang, Chu-Fei,Xu, Xiao-Lan,Feng, Yi-Si
-
-
Read Online
- Application of a new interface for rapid optimisation of bio-catalysed processes: Proteolytic digestion and an enzyme-catalysed transesterification as examples
-
The results of an evaluation of the iChemExplorer for the study of bio-catalysed processes are reported. The iChemExplorer comprises of a specially-designed sample tray and a control unit, the former of which replaces a traditional tray in an HPLC autosampler assembly. It can be heated and reaction mixtures can be agitated. The system has been used to study the trypsin digestion of insulin chain B, cytochrome c and bovine serum albumin as well as the lipase-catalysed transesterification reaction between ethyl benzoate and 1-butanol. The Royal Society of Chemistry and the Centre National de la Recherche Scientifique 2014.
- Stencel, Lauren M.,Leadbeater, Nicholas E.
-
-
Read Online
- THE USE OF MICROWAWE OVENS FOR RAPID ORGANIC SYNTHESIS
-
Four different types of organic reactions have been studied and seven different organic compounds have been prepared, under pressure in a microwave oven.Considerable rate increases have been observed.
- Gedye, Richard,Smith, Frank,Westaway, Kenneth,Ali, Humera,Baldisera, Lorraine,at al.
-
-
Read Online
- Aromatic Acylation of Hydroxy Groups via the Rare SN1 Reaction Pathway
-
The unusual reactivity of anthracene-9-carbonyl chloride indicates its acylation of low concentrations of hydroxy groups in aprotic organic solvents to proceed via an SN1 type mechanism.
- Bayliss, Mark A.,Homer, Roger B.,Shepherd, Martin J.
-
-
Read Online
- MWCNTs/SnZrMoP nano-composite as Ba (II)-selective electrode and heterogeneous catalyst for esterification of primary alcohols
-
The present investigation covers the synthesis, characterization and applications of a novel nano-composite of multiwalled carbon nanotubes–tin zirconium molybdophosphate (MWCNTs–SnZrMoP) ion exchanger. The synthesized material was characterized by various instrumental techniques viz. Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), and thermogravimetric/ differential thermal analysis (TGA/DTA). The nano-composite exhibited an ion exchange capacity of 2.56?meq?g?1, which is higher than its inorganic counterpart SnZrMoP (1.95?meq?g?1). The distribution studies confirmed that the as-synthesized nano-composite was selective for barium ions. The nano-composite was employed to fabricate an ion-selective electrode which showed a sub-Nernstian response for barium ions in the concentration range 1 × 10?7?M—1 × 10?1?M, with a response time of 11?s. The average slope of the calibration curve was observed to be 23.3?mV/decade with 1.78 × 10?8?M as limit of detection (LOD). The synthesized material was also used as a heterogeneous catalyst in esterification reactions of some primary alcohols due to its high mechanical, thermal and chemical stability. The esters produced were characterized by nuclear magnetic resonance (1H-NMR) and FT-IR techniques.
- Kaur, Rupinder,Kaushal, Sandeep,Singh, Prit Pal
-
-
Read Online
- A more efficient catalyst for the carbonylation of chloroarenes
-
The right ligand enables the efficient carbonylation of unactivated chloroarenes. A general synthesis of benzoic acid derivatives is possible with the palladium - Ferrocenylphosphane catalysts (see scheme).
- Maegerlein, Wolfgang,Indolese, Adriano F.,Beller, Matthias
-
-
Read Online
- Highly Efficient Carbon Monoxide Capture by Carbanion-Functionalized Ionic Liquids through C-Site Interactions
-
A novel method for the highly efficient and reversible capture of CO in carbanion-functionalized ionic liquids (ILs) by a C-site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol?1) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf2N] (2×10?3 mol mol?1). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C-site in the carbanion and CO resulted in the superior CO absorption capacities. Furthermore, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion-functionalized ILs provides a new way of separating and converting CO.
- Tao, Duan-Jian,Chen, Feng-Feng,Tian, Zi-Qi,Huang, Kuan,Mahurin, Shannon M.,Jiang, De-En,Dai, Sheng
-
-
Read Online
- Kinetic features of decomposition of benzoyl peroxide in superbasic media
-
Kinetics of decomposition of benzoyl peroxide in superbasic media comprising mixtures of a dipolar aprotic solvent and a strong ionic base is studied. The process occurs in two steps through formation of intermediate perbenzoate anion. The contribution of ionic reactions is controlled by the polarity and dielectric constant of the solvent. The decomposition products are molecular oxygen and an alkali metal benzoate or perbenzoate. These products can be alkylated with butyl bromide in superbasic media. 2005 Pleiades Publishing, Inc.
- Lyavinets
-
-
Read Online
- Mechanistic insight into the synergistic Cu/Pd-catalyzed carbonylation of aryl iodides using alcohols and dioxygen as the carbonyl source
-
Pd-catalyzed carbonylation, as an efficient synthetic approach to the installation of carbonyl groups in organic compounds, has been one of the most important research fields in the past decade. Although elegant reactions that allow highly selective carbonylations have been developed, straightforward routes with improved reaction activity and broader substrate scope remain long-term challenges for new practical applications. Here, we show a new type of synergistic Cu/Pd-catalyzed carbonylation reaction using alcohols and dioxgen as the carbonyl sources. A broad range of aryl iodides and alcohols are compatible with this protocol. The reaction is concise and practical due to the ready availability of the starting materials and the scalability of the reaction. In addition, the reaction affords lactones and lactams in an intermolecular fashion. Moreover, DFT calculations have been performed to study the detailed mechanisms. [Figure not available: see fulltext.]
- Li, Junxuan,Zhou, Jinlei,Wang, Yumei,Yu, Yue,Liu, Qiang,Yang, Tilong,Chen, Huoji,Cao, Hua
-
-
- LiHMDS: Facile, highly efficient and metal-free transesterification under solvent-free condition
-
Transesterification is one of the important organic reactions employed in numerous industrial as well as laboratory applications for the synthesis of various esters. Herein, we report a rapid, highly efficient, and transition metal-free transesterification reaction in the presence of LiHMDS under solvent-free conditions. The transesterification reaction was carried out with three different benzoate esters and a wide range of primary and secondary alcohols (from C3-C18) in good to excellent yields (45 examples). By considering the commercial role of esters, this method will be promising for the facile synthesis of esters in industry-relevant applications.
- Gore, Kiran R.,Mittapelli, Lavanya L.
-
-
- Mechanically induced solvent-free esterification method at room temperature
-
Herein, we describe two novel strategies for the synthesis of esters, as achieved under high-speed ball-milling (HSBM) conditions at room temperature. In the presence of I2 and KH2PO2, the reactions afford the desired esterification derivatives in 45% to 91% yields within 20 min of grinding. Meanwhile, using KI and P(OEt)3, esterification products can be obtained in 24% to 85% yields after 60 min of grinding. In addition, the I2/KH2PO2 protocol was successfully extended to the late-stage diversification of natural products showing the robustness of this useful approach. Further application of this method in the synthesis of inositol nicotinate was also discussed. This journal is
- Zheng, Lei,Sun, Chen,Xu, Wenhao,Dushkin, Alexandr V.,Polyakov, Nikolay,Su, Weike,Yu, Jingbo
-
p. 5080 - 5085
(2021/02/05)
-
- Method for synthesizing ester through catalytic esterification of ionic liquid
-
The invention relates to a method for synthesizing ester through catalytic esterification of ionic liquid. The method comprises the following step: carrying out an esterification reaction on carboxylic acid and an organic matter containing a hydroxyl group under the catalysis of the ionic liquid to obtain an esterification product, wherein the general formula of the ionic liquid is [Bu3PR]N(CF3SO2)2, and R is a C8-C16 straight chain or branched chain alkyl group. According to the above technical scheme, the method for synthesizing the ester through catalytic esterification of the ionic liquid is high in catalyst catalytic activity, high in reaction selectivity, few in by-products, high in reaction rate and high in catalyst recycling performance.
- -
-
Paragraph 0028-0030; 0035-0039
(2021/06/22)
-
- Encapsulation of heteropolyacids within hollow microporous polymer nanospheres for sustainable esterification reaction
-
Herein, the Keggin structural phosphotungstic acid (HPW) has been successfully encapsulated within hollow microporous polymer nanospheres (H-MPNs) by a “ship-in-bottle” approach. The H-MPNs are formed by self-assembly induced by hyper-crosslinking of polylactide-b-polystyrene (PLA-b-PS). The obtained catalysts (HPW@H-MPNs) exhibit more sustainable availability than the previously reported HPW-supported catalysts in esterification reaction. This excellent sustainability can be attributed to the stable microporous channels in H-MPNs which are smaller than the molecular size of HPW, thereby effectively preventing the HPW from leaking out. Moreover, such catalysts also perform well in terms of catalytic activity and universality because of the combination of a hollow structure in the interior and permeable pore channels in the shells. This type of polymer carrier and general encapsulation method may provide a new strategy for developing more sustainable catalysts for various chemical reactions.
- He, Zhiwei,Huang, Kun,Song, Chunmei,Wang, Huaqing,Yu, Haitao,Zhang, Li
-
-
- Oxidative esterification of alcohols by a single-side organically decorated Anderson-type chrome-based catalyst
-
The direct esterification of alcohols with non-noble metal-based catalytic systems faces great challenges. Here, we report a new chrome-based catalyst stabilized by a single pentaerythritol decorated Anderson-type polyoxometalate, [N(C4H9)4]3[CrMo6O18(OH)3C{(OCH2)3CH2OH}], which can realize the efficient transformation from alcohols to esters by H2O2oxidation in good yields and high selectivity without extra organic ligands. A variety of alcohols with different functionalities including some natural products and pharmaceutical intermediates are tolerated in this system. The chrome-based catalyst can be recycled several times and still keep the original configuration and catalytic activity. We also propose a reasonable catalytic mechanism and prove the potential for industrial applications.
- Wang, Jingjing,Jiang, Feng,Tao, Chaofu,Yu, Han,Ruhlmann, Laurent,Wei, Yongge
-
supporting information
p. 2652 - 2657
(2021/04/21)
-
- Electrochemical esterification via oxidative coupling of aldehydes and alcohols
-
An electrolytic method for the direct oxidative coupling of aldehydes with alcohols to produce esters is described. Our method involves anodic oxidation in presence of TBAF as supporting electrolyte in an undivided electrochemical cell equipped with graphite electrodes. This method successfully couples a wide range of alcohols to benzaldehydes with yields ranging from 70 to 90%. The protocol is easy to perform at a constant voltage conditions and offers a sustainable alternative over conventional methods.
- Smeyne, Dylan,Verboom, Katherine,Bryan, Maria,LoBue, James,Shaikh, Abid
-
supporting information
(2021/03/26)
-
- Zr-MOF-808 as Catalyst for Amide Esterification
-
In this work, zirconium-based metal–organic framework Zr-MOF-808-P has been found to be an efficient and versatile catalyst for amide esterification. Comparing with previously reported homogeneous and heterogeneous catalysts, Zr-MOF-808-P can promote the reaction for a wide range of primary, secondary and tertiary amides with n-butanol as nucleophilic agent. Different alcohols have been employed in amide esterification with quantitative yields. Moreover, the catalyst acts as a heterogeneous catalyst and could be reused for at least five consecutive cycles. The amide esterification mechanism has been studied on the Zr-MOF-808 at molecular level by in situ FTIR spectroscopic technique and kinetic study.
- Villoria-del-álamo, Beatriz,Rojas-Buzo, Sergio,García-García, Pilar,Corma, Avelino
-
supporting information
p. 4588 - 4598
(2020/12/25)
-
- Hydrogen-bond-assisted transition-metal-free catalytic transformation of amides to esters
-
The amide C-N cleavage has drawn a broad interest in synthetic chemistry, biological process and pharmaceutical industry. Transition-metal, luxury ligand or excess base were always vital to the transformation. Here, we developed a transition-metal-free hydrogen-bond-assisted esterification of amides with only catalytic amount of base. The proposed crucial role of hydrogen bonding for assisting esterification was supported by control experiments, density functional theory (DFT) calculations and kinetic studies. Besides broad substrate scopes and excellent functional groups tolerance, this base-catalyzed protocol complements the conventional transition-metal-catalyzed esterification of amides and provides a new pathway to catalytic cleavage of amide C-N bonds for organic synthesis and pharmaceutical industry. [Figure not available: see fulltext.]
- Huang, Changyu,Li, Jinpeng,Wang, Jiaquan,Zheng, Qingshu,Li, Zhenhua,Tu, Tao
-
-
- Carboxyboronate as a Versatile In Situ CO Surrogate in Palladium-Catalyzed Carbonylative Transformations
-
The application of carboxy-MIDA-boronate (MIDA=N-methyliminodiacetic acid) as an in situ CO surrogate for various palladium-catalyzed transformations is described. Carboxy-MIDA-boronate was previously shown to be a bench-stable boron-containing building block for the synthesis of borylated heterocycles. The present study demonstrates that, in addition to its utility as a precursor to heterocycle synthesis, carboxy-MIDA-boronate is an excellent in situ CO surrogate that is tolerant of reactive functionalities such as amines, alcohols, and carbon-based nucleophiles. Its wide functional-group compatibility is highlighted in the palladium-catalyzed aminocarbonylation, alkoxycarbonylation, carbonylative Sonogashira coupling, and carbonylative Suzuki–Miyaura coupling of aryl halides. A variety of amides, esters, (hetero)aromatic ynones, and bis(hetero)aryl ketones were synthesized in good-to-excellent yields in a one-pot fashion.
- Tien, Chieh-Hung,Trofimova, Alina,Holownia, Aleksandra,Kwak, Branden S.,Larson, Reed T.,Yudin, Andrei K.
-
supporting information
p. 4342 - 4349
(2020/12/25)
-
- Metal nitrate-catalyzed one-pot oxidative esterification of benzaldehyde with hydrogen peroxide in alcoholic solutions at room temperature
-
The activity of metal nitrate catalysts was investigated in the oxidative esterification reactions of benzaldehyde with hydrogen peroxide. Several types of metal nitrates (alkaline, alkaline earth, and transition metals) were evaluated as catalysts. Among the assessed salts, Fe(NO3)3 was the most efficient catalyst toward the formation of the target product (i.e., benzoic alkyl ester). In methyl alcohol, benzaldehyde was selectively oxidized to benzoic acid and then esterified to methyl benzoate. The efficiency of the catalyst was correlated with its higher Lewis acidity character, which was established through the pH measurements of methanolic solutions of the soluble metal nitrate salts. The influence of main variables of the reaction, such as catalyst load, temperature, and reactant stoichiometry, was investigated. The size of the carbon chain and steric hindrance played an essential role in the reaction selectivity. While methyl and ethyl alcohols selectively provided ester as the main product (ca. 70-75%) and acetal as the subproduct, the other alcohols gave ester, hemiacetal, and benzoic acid, which was formed in the least amount. The use of an inexpensive catalyst, a green oxidant, mild conditions, and short reaction times were the positive aspects of this one-pot process. The high TON (ca. 900) is evidence of the high catalytic activity of Fe(NO3)3. It is noteworthy that this methodology does not rely upon ligands and other additives.
- Da Silva, Márcio José,De Oliveira, Cesar Macedo
-
p. 3683 - 3691
(2021/03/03)
-
- Method for preparing carboxylic ester compounds by oxidizing and breaking carbon-carbon bonds of secondary alcohol compounds
-
The invention discloses a method for preparing carboxylic ester compounds by oxidizing and breaking carbon-carbon bonds of secondary alcohol compounds. The method comprises the following steps: adding a secondary alcohol compound, an additive and a nitrogen-doped mesoporous carbon loaded monatomic catalyst into a fatty primary alcohol solvent, putting into a pressure container, sealing, introducing oxygen source gas with a certain pressure, controlling the pressure of the oxygen source gas to be 0.1-1 MPa and the reaction temperature to be 80-150 DEG C, and obtaining a product after the reaction to be the carboxylic ester compound. The nitrogen-doped mesoporous carbon-loaded monatomic catalyst adopted by the invention is high in activity, the highest separation yield of the carboxylic ester compound as a reaction product reaches 99%, the method is wide in application range, the reaction conditions are easy to control, the catalyst can be recycled, the post-treatment is simple, and the method is suitable for industrial production.
- -
-
Paragraph 0088-0089; 0093
(2021/06/02)
-
- Alkali-modified heterogeneous Pd-catalyzed synthesis of acids, amides and esters from aryl halides using formic acid as the CO precursor
-
To establish an environmentally friendly green chemical process, we minimized and resolved a significant proportion of waste and hazards associated with conventional organic acids and molecular gases, such as carbon monoxide (CO). Herein, we report a facile and milder reaction procedure, using low temperatures/pressures and shorter reaction time for the carboxyl- and carbonylation of diverse arrays of aryl halides over a newly developed cationic Lewis-acid promoted Pd/Co3O4catalyst. Furthermore, the reaction proceeded in the absence of acid co-catalysts, and anhydrides for CO release. Catalyst reusability was achievedviascalable, safer, and practical reactions that provided moderate to high yields, paving the way for developing a novel environmentally benign method for synthesizing carboxylic acids, amides, and esters.
- Fapojuwo, Dele Peter,Maqunga, Nomathamsanqa Prudence,Meijboom, Reinout,Mogudi, Batsile M.,Molokoane, Pule Petrus,Onisuru, Oluwatayo Racheal,Oseghale, Charles O.
-
p. 26937 - 26948
(2021/08/17)
-
- Nickel-Catalyzed Hydrodeoxygenation of Aryl Sulfamates with Alcohols as Mild Reducing Agents
-
The nickel-catalyzed hydrodeoxygenation of aryl sulfamates has been developed with alcohols as mild reductants. A variety of functional groups and heterocycles were tolerated in this reaction system to give the desired products in high yields. In addition, the gram-scale process and stepwise cine-substitution were also achieved with high efficiency.
- Matsuo, Kasumi,Kuriyama, Masami,Yamamoto, Kosuke,Demizu, Yosuke,Nishida, Koyo,Onomura, Osamu
-
p. 4449 - 4460
(2021/08/25)
-
- Enolate-Based Regioselective Anti-Beckmann C-C Bond Cleavage of Ketones
-
The Baeyer-Villiger or Beckmann rearrangements are established methods for the cleavage of ketone derivatives under acidic conditions, proceeding for unsymmetrical precursors selectively at the more substituted site. However, the fragmentation regioselectivity cannot be switched and fragmentation at the less-substituted terminus is so far not possible. We report here that the reaction of ketone enolates with commercial alkyl nitrites provides a direct and regioselective way of fragmenting ketones into esters and oximes or ω-hydroxyimino esters, respectively. A comprehensive study of the scope of this reaction with respect to ketone classes and alkyl nitrites is presented. Control over the site of cleavage is gained through regioselective enolate formation by various bases. Oxidation of kinetic enolates of unsymmetrical ketones leads to the otherwise unavailable "anti-Beckmann"cleavage at the less-substituted side chain, while cleavage of thermodynamic enolates of the same ketones represents an alternative to the Baeyer-Villiger oxidation or the Beckmann rearrangement under basic conditions. The method is suited for the transformation of natural products and enables access to orthogonally reactive dicarbonyl compounds.
- Jahn, Ullrich,Ma?ek, Tomá?
-
p. 11608 - 11632
(2021/09/02)
-
- N-Aroylbenzotriazoles as Efficient Reagents for o-Aroylation in Absence of Organic Solvent
-
N-Aroylbenzotriazoles have been shown to be efficient reagents for esterification in the absence of organic solvent. Grinding of N-aroylbenzoytiazoles with twofold excess of alcohols for a couple of hours at room temperature gave corresponding esters in high percentage of yields.
- Hahnvajanawong, Viwat,Phungpis, Baramee
-
p. 2671 - 2674
(2021/10/25)
-
- IrIII-Catalyzed direct syntheses of amides and esters using nitriles as acid equivalents: A photochemical pathway
-
An unprecedented IrIII[df(CF3)ppy]2(dtbbpy)PF6-catalyzed simple photochemical process for direct addition of amines and alcohols to the relatively less reactive nitrile triple bond is described herein. Various amides and esters are synthesized as the reaction products, with nitriles being the acid equivalents. A mini-library of different types of amides and esters is made using this mild and efficient process, which uses only 1 mol% of photocatalyst under visible light irradiation (λ = 445 nm). The reaction strategy is also efficient for gram-scale synthesis.
- Talukdar, Ranadeep
-
supporting information
p. 5303 - 5308
(2020/04/17)
-
- Palladium-catalyzed aryloxy- and alkoxycarbonylation of aromatic iodides in γ-valerolactone as bio-based solvent
-
Fossil-based solvents and triethylamine as a toxic and volatile base were successfully replaced with γ-valerolactone as a non-volatile solvent and K2CO3 as inorganic base in the alkoxy- and aryloxycarbonylation of aryl iodides using phosphine-free Pd catalyst systems. By this, the traditional systems were not simply replaced but also significantly improved. In the study, the effects of different reaction parameters, i.e. the use of several other solvents, the temperature, the carbon monoxide pressure, the base and the catalyst concentrations, were evaluated in details on the efficiency of the carbonylations. To gather some information on the mechanism of these reactions, the effects of the electronic parameters (σ) of various aromatic substituents of the aryl iodides as well as the influence of para-substitution of phenol were investigated on the activity. For a comparison, the aryl-substituted aryl iodides were also reacted with methanol and aryl iodide was also alkoxycarbonylated using several different lower alcohols. From the observed correlations between the electronic parameters of the aromatic substituents and the rates, it appears that the rate determining step is the oxidative addition of Ar–I to Pd0, provided that sufficient amounts of nucleophiles are present for the ester formation. If this is not the case, the rate of nucleophile attack might determine the overall rate.
- Tukacs, József M.,Marton, Bálint,Albert, Eszter,Tóth, Imre,Mika, László T.
-
-
- Soluble asphaltene oxide: A homogeneous carbocatalyst that promotes synthetic transformations
-
Carbocatalysts, materials which are predominantly composed of carbon and catalyze the synthesis of organic or inorganic compounds, are promising alternatives to metal-based analogues. Even though current carbocatalysts have been successfully employed in a broad range of synthetic transformations, they suffer from a number of drawbacks in part due to their heterogeneous nature. For example, the insolubility of prototypical carbocatalysts, such as graphene oxide (GO), may restrict access to catalytically-active sites in a manner that limits performance and/or challenges optimization. Herein we describe the preparation and utilization of soluble asphaltene oxide (sAO), which is a novel material that is composed of oxidized polycyclic aromatic hydrocarbons and is soluble in a wide range of organic solvents as well as in aqueous media. sAO promotes an array of synthetically useful transformations, including esterifications, cyclizations, multicomponent reactions, and cationic polymerizations. In many cases, sAO was found to exhibit higher catalytic activities than its heterogeneous analogues and was repeatedly and conveniently recycled, features that were attributed to its ability to form homogeneous phases.
- Bielawski, Christopher W.,Jung, Hyosic
-
p. 15598 - 15603
(2020/05/05)
-
- Palladium-Catalyzed Para-Selective Difluoromethylation of Arene Esters
-
Highly efficient, palladium-catalyzed, para-selective difluoromethylation of arene esters has been developed using [1,1′-biphenyl]-2-dicyclohexylphosphine as the effective ligand. A wide variety of arene esters bearing various functional groups were all compatible with the reaction conditions, leading to para-difluoromethylated products in moderate to good yields. Moreover, benzoylamide and benzenesulfonamide were also well-tolerated, suggesting that this novel catalyst system has broad applications to a variety of substrates.
- Tu, Guangliang,Wang, Dongjie,Yuan, Chunchen,Zhang, Jingyu,Zhao, Yingsheng
-
p. 10740 - 10749
(2020/09/18)
-
- Esterification of Tertiary Amides: Remarkable Additive Effects of Potassium Alkoxides for Generating Hetero Manganese–Potassium Dinuclear Active Species
-
A catalyst system of mononuclear manganese precursor 3 combined with potassium alkoxide served as a superior catalyst compared with our previously reported manganese homodinuclear catalyst 2 a for esterification of not only tertiary aryl amides, but also tertiary aliphatic amides. On the basis of stoichiometric reactions of 3 and potassium alkoxide salt, kinetic studies, and density functional theory (DFT) calculations, we clarified a plausible reaction mechanism in which in situ generated manganese–potassium heterodinuclear species cooperatively activates the carbonyl moiety of the amide and the OH moiety of the alcohols. We also revealed details of the reaction mechanism of our previous manganese homodinuclear system 2 a, and we found that the activation free energy (ΔG≠) for the manganese–potassium heterodinuclear complex catalyzed esterification of amides is lower than that for the manganese homodinuclear system, which was consistent with the experimental results. We further applied our catalyst system to deprotect the acetyl moiety of primary and secondary amines.
- Akiyama, Shoko,Himo, Fahmi,Hirai, Takahiro,Katayama, Shoichiro,Kato, Daiki,Mai, Binh Khanh,Mashima, Kazushi,Nagae, Haruki
-
supporting information
(2020/07/25)
-
- Facile synthesis of a highly efficient Co/Cu@NC catalyst for base-free oxidation of alcohols to esters
-
The direct oxidation of alcohols to esters is an environmentally benign and cost-effective organic synthetic strategy, but it is still a great challenge to discover an economic, highly active, and long-term stable catalyst for efficient transformation of alcohols to esters under milder conditions. Herein, we developed cobalt and copper nanoparticle -co-decorated nitrogen-doped carbon catalysts (CoCu@NCn) through two steps of ball milling and calcination. It was found that CoCu@NCn could catalyze the oxidation of alcohols to esters effectively in the absence of basic additives. The catalytic activity was much higher than those of monometallic Co@NC2 and Cu@NC2 samples, and the catalyst can be conveniently recovered and quite steadily reused. Through a series of control experiments and characterizations, it is concluded that the remarkable catalytic performance of CoCu@NC2 was associated with the synergistic effect between the two metal components, the enhanced basic active sites and the active surface area.
- Jiang, Jiusheng,Li, Xiang,Du, Shengyu,Shi, Langchen,Jiang, Pingping,Zhang, Pingbo,Dong, Yuming,Leng, Yan
-
p. 7780 - 7785
(2020/06/09)
-
- Mechanochemical Palladium-Catalyzed Carbonylative Reactions Using Mo(CO)6
-
Esters and amides were mechanochemically prepared by palladium-catalyzed carbonylative reactions of aryl iodides by using molybdenum hexacarbonyl as a convenient solid carbonyl source and avoiding a direct handling of gaseous carbon monoxide. Real-time monitoring of the mechanochemical reaction by in situ pressure sensing revealed that CO is rapidly transferred from Mo(CO)6 to the active catalytic system without significant release of molecular carbon monoxide.
- van Bonn, Pit,Bolm, Carsten,Hernández, José G.
-
supporting information
p. 2576 - 2580
(2020/02/20)
-
- Nickel-Catalyzed Esterification of Amides Under Mild Conditions
-
Abstract: The use of ligands to adjust the catalytic activity of the catalyst for esterification of amides is challenge in organic chemistry. In this paper, Nickel(II)-NHC-catalyzed the esterification reaction between N,N-di-Boc amide and alcohols at room temperature have been demonstrated. The imidazolium salt bearing a hydroxyl functionalized side arm showed high effective catalytic activity in the activation of the amide N–C bond in air atmosphere. Graphic Abstract: [Figure not available: see fulltext.].
- Li, Jun-Fei,Wang, Yao-Fang,Wu, Yuan-Yuan,Liu, Wen-Jing,Wang, Jun-Wen
-
p. 874 - 880
(2019/11/13)
-
- Catalytic conversion of ketones to esters: Via C(O)-C bond cleavage under transition-metal free conditions
-
The catalytic conversion of ketones to esters via C(O)-C bond cleavage under transition-metal free conditions is reported. This catalytic process proceeds under solvent-free conditions and offers an easy operational procedure, broad substrate scope with excellent selectivity, and reaction scalability. This journal is
- Subaramanian, Murugan,Ramar, Palmurukan M.,Rana, Jagannath,Gupta, Virendra Kumar,Balaraman, Ekambaram
-
supporting information
p. 8143 - 8146
(2020/09/09)
-
- Carbonylative Suzuki coupling and alkoxycarbonylation of aryl halides using palladium supported on phosphorus-doped porous organic polymer as an active and robust catalyst
-
Developing highly active catalysts with the combined advantages of molecular and solid catalysis is considered as the “Holy Grail” in the area of catalysis research. Herein, a phosphorus-doped porous polymer-immobilized palladium was successfully developed as an efficient, robust, and recyclable catalyst for the carbonylative Suzuki coupling and alkoxycarbonylation reactions of aryl halides. Rather than just as an immobilizing molecular catalyst, palladium supported on phosphorus-doped porous organic polymer exhibits even better catalytic performances than that of its analogue homogeneous catalysts in both carbonylation reactions. Moreover, the catalyst can be easily separated and reused for at least 5 times without significant loss in reactivity. Importantly, the catalyst was highly stable under carbonylation reaction conditions, and no palladium nanoparticle was observed even after the 5th reuse.
- Wan, Yali,Song, Fangxiang,Ye, Tao,Li, Guangxing,Liu, Dingfu,Lei, Yizhu
-
-
- MnO2?Fe3O4 Magnetic Nanoparticles as Efficient and Recyclable Heterogeneous Catalyst for Benzylic sp3 C?H Oxidation
-
Herein, we report a highly chemoselective and efficient heterogeneous MnO2?Fe3O4 MNP catalyst for the oxidation of benzylic sp3 C?H group of ethers using TBHP as a green oxidant to afford ester derivatives in high yield under batch/continuous flow module. This catalyst was also effective for the benzylic sp3 C?H group of methylene derivatives to furnish the ketone in high yield which can be easily integrated into continuous flow condition for scale up. The catalyst is fully characterized by spectroscopic techniques and it was found that 0.424 % MnO2?Fe3O4 catalyzes the reaction; the magnetic nanoparticles of this catalyst could be easily recovered from the reaction mixture. The recovered catalyst was recycled for twelve cycles without any loss of the catalytic activity. The advantages of MnO2?Fe3O4 MNP are its catalytic activity, easy preparation, recovery, and recyclability, gram scale synthesis with a TOF of up to 14.93 h?1 and low metal leaching during the reaction.
- Pandey, Akanksha M.,Agalave, Sandip G.,Vinod, Chathakudath P.,Gnanaprakasam, Boopathy
-
supporting information
p. 3414 - 3423
(2019/10/19)
-
- Method for synthesizing esters
-
The invention belongs to the technical field of organic chemical synthesis, and discloses a method for synthesizing esters. The method is characterized in that a dehydration reaction of carboxylic acid and alcohols is promoted by common imidazole quaternary ammonium salts, thiazole quaternary ammonium salts or triazole quaternary ammonium salts and fluorides to synthesize the esters. The method has the advantages of cheap raw materials, simple process, greenness, safety, high efficiency and environmental protection, and is suitable for industrial production.
- -
-
Paragraph 0018-0020
(2019/11/29)
-
- Robust acidic pseudo-ionic liquid catalyst with self-separation ability for esterification and acetalization
-
The novel acidic pseudo-ionic liquid catalyst with self-separation ability has been synthesized through the quaternization of triphenylphosphine and the acidification with silicotungstic acid. The pseudo-IL showed high activities for the esterification with average conversions over 90%. The pseudo-IL showed even higher activities for acetalization than traditional sulfuric acid. The homogeneous catalytic process benefited the mass transfer efficiency. The pseudo-IL separated from the reaction mixture automatically after reactions, which was superior to other IL catalysts. The high catalytic activities, easy reusability and high stability were the key properties of the novel catalyst, which hold great potential for green chemical processes.
- Shi, Yingxia,Liang, Xuezheng
-
p. 1413 - 1421
(2019/05/04)
-
- 1,3-Dibromo-5,5-dimethylhydantoin as a Precatalyst for Activation of Carbonyl Functionality
-
Activation of carbonyl moiety is one of the most rudimentary approaches in organic synthesis and is crucial for a plethora of industrial-scale condensation reactions. In esterification and aldol condensation, which represent two of the most important reactions, the susceptibility of the carbonyl group to nucleophile attack allows the construction of a variety of useful organic compounds. In this context, there is a constant need for development of and improvement in the methods for addition-elimination reactions via activation of carbonyl functionality. In this paper, an advanced methodology for the direct esterification of carboxylic acids and alcohols, and for aldol condensation of aldehydes using widely available, inexpensive, and metal-free 1,3-dibromo-5,5-dimethylhydantoin under neat reaction conditions is reported. The method is air- and moisture-tolerant, allowing simple synthetic and isolation procedures for both reactions presented in this paper. The reaction pathway for esterification is proposed and a scale-up of certain industrially important derivatives is performed.
- ?ebular, Klara,Bo?i?, Bojan ?.,Stavber, Stojan
-
-
- Novel SO3H-functionalized polyoxometalate-based ionic liquids as highly efficient catalysts for esterification reaction
-
Three novel heteropolyanion-based Br?nsted acidic ionic liquids (BAILs), butane mono sulfoacid-functionalized 1,10-phenanthrolinum, butane mono and bis sulfoacid-functionalized 1,4-dimethylpiperazinium salts of phosphortungstate catalyst (PhBs1-PW, [PipBs1]3-PW and [PipBs2]3-(PW)2) were synthesized and well characterized with FTIR, 1H and 13C NMR, Electro-Spray Ionization Mass Spectrometry (ESI-MS), Elemental analysis (CHNS), EDX and TG analysis techniques. The esterification reactions of monocarboxylic acids with monohydric alcohols were carried out using these catalysts. The introduced catalysts present a self-separation performance after reaction, which can be easily recovered and quite steadily reused as confirmed by six-run recycling test. Moreover, bis sulfoacid-functionalized 1,4-dimethylpiperazinium salt of phosphortungstate showed the best catalytic performance among the prepared catalysts for the esterification reaction.
- Keshavarz, Mosadegh,Iravani, Nasir,Parhami, Abolfath
-
p. 272 - 278
(2019/04/25)
-
- A novel application of terminal alkynes as the homogeneous catalysts for acetalization and esterification
-
The theoretical study focused on the possible use of low-molecular-weight mono-as well as multifunctional terminal alkynes as catalysts for two reactions, which are known to be typically acid catalyzed - acetalization and esterification, is presented in this study. Multifunctional terminal alkynes [(diethynylbenzenes, triethynylbenzene, and tetrakis(4-ethynylphenyl)methane]were significantly more active than the monofunctional ones (cyclopropylacetylene, phenylacetylene, 3-cyclohexylprop-1-yne, 1-ethynyl-2-fluorobenzene, 1-ethynyl-4-fluorobenzene, 4-ethynyltoluene, 4-tert-butylphenylacetylene, and 2-ethynyl-α,α,α-trifluorotoluene), this fact can be partly explained by the higher amount of ethynyl groups per alkyne molecule. We confirmed that terminal ethynyl groups in low-molecular-weight alkynes can successfully act as acid catalytic centers for acetalization as well as for esterification.
- Sekerová, Lada,Vysko?ilová, Eli?ka,?erveny, Libor,Sedlá?ek, Jan
-
p. 2877 - 2882
(2019/04/17)
-
- Dinuclear manganese alkoxide complexes as catalysts for C-N bond cleavage of simple tertiary: N, N -dialkylamides to give esters
-
Amide bonds are stable due to the resonance between the nitrogen lone pair and the carbonyl moiety, and therefore the chemical transformation of amides, especially tertiary amides, involving C-N bond fission is considered one of the most difficult organic reactions, unavoidably requiring harsh reaction conditions and strong acids or bases. We report the catalytic C-N bond cleavage of simple tertiary N,N-dialkylamides to give corresponding esters using a catalyst system (2 mol% based on Mn atoms) of a tetranuclear manganese alkoxide, [Mn(acac)(OEt)(EtOH)]4 (1c), combined with four equivalents of 4,7-bis(dimethylamino)-1,10-phenanthroline (L1: Me2N-Phen). Regarding the reaction mechanism, we isolated a dinuclear manganese complex, [Mn(acac)(OEt)(Phen)]2 (6c), which was revealed as the catalytically active species for the esterification of tertiary amides.
- Nagae, Haruki,Hirai, Takahiro,Kato, Daiki,Soma, Shusei,Akebi, Shin-Ya,Mashima, Kazushi
-
p. 2860 - 2868
(2019/03/13)
-
- Base-Free Iron Catalyzed Transfer Hydrogenation of Esters Using EtOH as Hydrogen Source
-
Herein, we report on the use of the iron pincer complex Iron-MACHO-BH, in the base-free transfer hydrogenation of esters with EtOH as a hydrogen source. More than 20 substrates including aromatic and aliphatic esters and lactones were reduced affording the desired primary alcohols and diols with moderate to excellent isolated yields. It is also possible to reduce polyesters to the diols with this method, enabling a novel way of plastic recycling. Reduction of the renewable substrate methyl levulinate proceeds to form 1,4-pentanediol directly. The yields are largely governed by the equilibrium between the alcohol and the ethyl ester.
- Farrar-Tobar, Ronald A.,Wozniak, Bartosz,Savini, Arianna,Hinze, Sandra,Tin, Sergey,de Vries, Johannes G.
-
p. 1129 - 1133
(2019/01/04)
-
- Synthesis of Esters from Stable and Convenient Sulfoxonium Precursors under Catalyst- And Additive-Free Conditions
-
A convenient and efficient procedure for the construction of esters from stable sulfoxonium ylides and alcohols has been developed. This protocol presents a broad substrate scope and good yields of the desired esters can be isolated. Notably, no catalyst, oxidant, base or any other additive is required.
- Wu, Xiao-Feng,Yuan, Yang
-
p. 1820 - 1824
(2019/09/09)
-
- Dehydrogenative cross-coupling of primary alcohols to form cross-esters catalyzed by a manganese pincer complex
-
Base-metal-catalyzed dehydrogenative cross-coupling of primary alcohols to form cross-esters as major products, liberating hydrogen gas, is reported. The reaction is catalyzed by a pincer complex of earth-abundant manganese in the presence of catalytic base, without any hydrogen acceptor or oxidant. Mechanistic insight indicates that a dearomatized complex is the actual catalyst, and indeed this independently prepared dearomatized complex catalyzes the reaction under neutral conditions.
- Das, Uttam Kumar,Ben-David, Yehoshoa,Leitus, Gregory,Diskin-Posner, Yael,Milstein, David
-
p. 479 - 484
(2019/01/11)
-
- Pd-Colloids-Catalyzed/Ag2O-Oxidized General and Selective Esterification of Benzylic Alcohols
-
Palladium colloids obtained from the degradation of Hermann–Beller palladacycle proved to be an efficient catalytic system in combination with silver oxide as a selective oxidant for the oxidative esterification of differently substituted benzyl alcohols in MeOH as solvent. Excellent reactivity exhibited by the catalytic system also allowed the alcoholic coupling partner to be changed from MeOH to a wide range of alcohols having diverse functionalities. The mildness of the developed protocol also made it possible to employ propargyl alcohol as the coupling partner without any observation of any interference of the terminal alkyne. Selective oxidative coupling of a primary alcoholic functional group over secondary in the case of glycols and glycerols was also made possible using the developed catalyst system. To test the relevancy of Pd/Ag combined catalysis mixed Pd/Ag colloids were synthesized, characterized by TEM, XRD and XPS and applied to oxidative-esterification successfully.
- Sable, Vaibhav,Shah, Jagrut,Sharma, Anuja,Kapdi, Anant R.
-
supporting information
p. 2639 - 2647
(2019/07/08)
-
- A Straightforward Conversion of Activated Amides and Haloalkanes into Esters under Transition-Metal-Free Cs 2 CO 3 /DMAP Conditions
-
The esterification of activated amides, N -acylsaccharins, under transition-metal-free conditions with good functional group tolerance has been developed, resulting in C-N cleavage leading to efficient synthesis of a variety of esters in moderate to good yields. This work demonstrates that esterification may proceed by using simple N -acylsaccharins, haloalkanes, and Cs 2 CO 3 as oxygen source.
- Chen, Liuqing,Gu, Ying,Jian, Junsheng,Liu, Yueping,Miao, Liqiong,Wang, Zijia,Zeng, Zhuo
-
supporting information
p. 4078 - 4084
(2019/10/28)
-
- Aldehydes as potential acylating reagents for oxidative esterification by inorganic ligand-supported iron catalysis
-
The oxidative esterification of various aldehydes with alcohols could be achieved by a heterogeneous iron(iii) catalyst supported on a ring-like POM inorganic ligand under mild conditions, affording the corresponding esters, including several drug molecules and natural products, in high yields. ESI-MS and control experiments demonstrated that POM-FeV(O) was the active catalytic species and the plausible mechanism was presented. More importantly, the 6th run of the iron catalyst recycles shows only a slight decrease in the yield.
- Yu, Han,Wang, Jingjing,Wu, Zhikang,Zhao, Qixin,Dan, Demin,Han, Sheng,Tang, Jiangjiang,Wei, Yongge
-
supporting information
p. 4550 - 4554
(2019/08/21)
-
- Woody species: A new bio-based material for dual Ca/Mg catalysis with remarkable Lewis acidity properties
-
Advances in green catalysis have promoted the development of ecocatalysis encountered in most of the main transformations of organic chemistry. Taking advantage of the remarkable capacity of certain plants to hyperaccumulate transition metals into shoots or roots, we have addressed the direct use of metals derived from contaminated plant wastes as supported Lewis acid catalysts, coupling agents, oxidative and reducing catalysts in green chemistry. This approach constituted the first example of chemical catalyst based on phytotechnologies. Herein, we show that the concept can be extended to common and abundant plant species that are surprisingly appropriated for chemical catalysis. We present that willow, birch, plane and linden trees can be used to produce bio-based and original Lewis acid catalysts. The catalytic potential of these species will be illustrated through two representative transformations, acetalisation and oxidative esterification. Thanks to their original polymetallic composition, ecocatalysts provided better results compared to classical metal chlorides such as MgCl2, CaCl2 or ZnCl2. This illustrates the interest of the ecocatalysis and is incorporated within the green and sustainable chemistry concept.
- Deyris, Pierre-Alexandre,Adler, Pauline,Petit, Eddy,Legrand, Yves-Marie,Grison, Claude
-
p. 3133 - 3142
(2019/06/18)
-
- Silica-Supported MnII Sites as Efficient Catalysts for Carbonyl Hydroboration, Hydrosilylation, and Transesterification
-
Manganese, the third most abundant transition-metal element after iron and titanium, has recently been demonstrated to be an effective homogeneous catalyst in numerous reactions. Herein, the preparation of silica-supported MnII sites is reported using Surface Organometallic Chemistry (SOMC), combined with tailored thermolytic molecular precursors approach based on Mn2[OSi(OtBu)3]4 and Mn{N(SiMe3)2}2?THF. These supported MnII sites, free of organic ligands, efficiently catalyze numerous reactions: hydroboration and hydrosilylation of ketones and aldehydes as well as the transesterification of industrially relevant substrates.
- Ghaffari, Behnaz,Mendes-Burak, Jorge,Chan, Ka Wing,Copéret, Christophe
-
supporting information
p. 13869 - 13873
(2019/11/11)
-
- Single-Step Dual Functionalization: One-Pot Bromination-Cross-Dehydrogenative Esterification of Hydroxy Benzaldehydes with CCl 3 Br - A Comparison with Selectfluor
-
Bromination of phenolic compounds without directly using molecular bromine possesses much importance. In this article an Ir III /CCl 3 Br-assisted single-step double functionalization of hydroxy benzaldehydes is reported. It involves simultaneous esterification of the aldehyde group and bromination of the aryl ring of phenolic aldehydes in one-pot. The reaction proceeds under mild conditions in the presence of 445 nm blue LED light to obtain highly functionalized bromo hydroxy benzoates in moderate to good yields. In comparison, Selectfluor as an oxidant gives only non-bromo phenolic esters.
- Talukdar, Ranadeep
-
supporting information
p. 1713 - 1718
(2019/08/28)
-
- Nickel-Catalyzed Amide Bond Formation from Methyl Esters
-
Despite being one of the most important and frequently run chemical reactions, the synthesis of amide bonds is accomplished primarily by wasteful methods that proceed by stoichiometric activation of one of the starting materials. We report a nickel-catalyzed procedure that can enable diverse amides to be synthesized from abundant methyl ester starting materials, producing only volatile alcohol as a stoichiometric waste product. In contrast to acid- and base-mediated amidations, the reaction is proposed to proceed by a neutral cross coupling-type mechanism, opening up new opportunities for direct, efficient, chemoselective synthesis.
- Ben Halima, Taoufik,Masson-Makdissi, Jeanne,Newman, Stephen G.
-
p. 12925 - 12929
(2018/09/14)
-
- Synthesis method of carboxylic ester compound
-
The invention discloses a synthesis method of a carboxylic ester compound and relates to the technical field of organic synthesis. The synthesis method of the carboxylic ester compound adopts a fluorine-containing coupling agent and comprises the following specific steps: 1) putting the fluorine-containing coupling agent and N-methylmorpholine in a substance mass ratio of 1:(1-2) into a reactor, adding anhydrous tetrahydrofuran, and performing stirring for 5-20 minutes at 0-5 DEG C in the present of N2; 2) putting a carboxylic acid compound into the reactor, performing a continuous reaction for 15-45 minutes, further putting an alcohol compound into the reactor, performing a room-temperature reaction for 48-60 hours, and stopping the reaction; and 3) performing filtration to remove solid impurities, performing spinning evaporation to remove an organic solvent, and performing recrystallization or column chromatography by using ethanol, so as to obtain the carboxylic ester compound. By adopting the synthesis method of the carboxylic ester compound, which is disclosed by the invention, reaction difficulties in synthesizing carboxylic ester compounds can be reduced, and efficient synthesis of carboxylic ester compounds under room-temperature mild conditions can be achieved.
- -
-
-
- Esterification of aryl/alkyl acids catalysed by n-bromosuccinimide under mild reaction conditions
-
N-halosuccinimides (NXSs) are well-known to be convenient, easily manipulable and low-priced halogenation reagents in organic synthesis. In the present work, N-bromosuccinimide (NBS) has been promoted as the most efficient and selective catalyst among the NXSs in the reaction of direct esterification of aryl and alkyl carboxylic acids. Comprehensive esterification of substituted benzoic acids, mono-, di- and tri-carboxy alkyl derivatives has been performed under neat reaction conditions. The method is metal-free, air- and moisture-tolerant, allowing for a simple synthetic and isolation procedure as well as the large-scale synthesis of aromatic and alkyl esters with yields up to 100%. Protocol for the recycling of the catalyst has been proposed.
- ?ebular, Klara,Bo?i?, Bojan ?.,Stavber, Stojan
-
-
- Superior performance of Co-N/m-C for direct oxidation of alcohols to esters under air
-
A convenient, expeditious, and high-efficiency protocol for the transformation of alcohols into esters using a Co-modified N-doped mesoporous carbon material (Co-N/m-C) as the catalyst is proposed. The catalyst was prepared through direct pyrolysis of a macromolecular precursor. The catalyst prepared using a pyrolysis temperature of 900 °C (labeled Co-N/m-C-900) exhibited the best performance. The strong coordination between the ultra-dispersed cobalt species and the pyridine nitrogen as well as the large area of the mesoporous surface resulted in a high turnover frequency value (107.6 mol methyl benzoate mol?1 Co h?1) for the direct aerobic oxidation of benzyl alcohol to methyl benzoate. This value is much higher than those of state-of-the-art transition-metal-based nanocatalysts reported in the literature. Moreover, the catalyst exhibited general applicability to various structurally diverse alcohols, including benzylic, allylic, and heterocyclic alcohols, achieving the target esters in high yields. In addition, a preliminary evaluation revealed that Co-N/m-C-900 can be used six times without significant activity loss. In general, the process was rapid, simple, and cost-effective.
- Li, Ning,Shang, Sensen,Wang, Lianyue,Niu, Jingyang,Lv, Ying,Gao, Shuang
-
p. 1249 - 1257
(2018/06/14)
-
- Facile, highly efficient and environmentally friendly transesterification mediated by platinum dioxide and nickel oxide under essentially neutral conditions
-
A practical, facile and highly efficient transesterification reaction under essentially neutral conditions was achieved using platinum dioxide (PtO2) or PtO2/nickel oxide (NiO) as the catalyst. A number of esters and alcohols that contain various functional groups were employed. Good to excellent yields were obtained for different aromatic or aliphatic starting materials. The Pt-alcohol intermediate generated in situ facilitated the exchange of low-alcohol esters to high-alcohol esters.
- Teng, Binhao,Shi, Jiangong,Yao, Chunsuo
-
p. 2465 - 2471
(2018/06/11)
-
- Cross-Dehydrogenating Coupling of Aldehydes with Amines/R-OTBS Ethers by Visible-Light Photoredox Catalysis: Synthesis of Amides, Esters, and Ureas
-
A straightforward synthesis of amides, ureas, and esters is reported by visible-light cross-dehydrogenating coupling (CDC) of aldehydes (or amine carbaldehydes) and amines/R-OTBS ethers by photoredox catalysis. The reaction is found to be general and high yielding. A plausible mechanistic pathway has been proposed for these transformations and is supported by appropriate controlled experiments.
- Pandey, Ganesh,Koley, Suvajit,Talukdar, Ranadeep,Sahani, Pramod Kumar
-
supporting information
p. 5861 - 5865
(2018/09/21)
-
- Aerobic oxidative esterification and thioesterification of aldehydes using dibromoisocyanuric acid under mild conditions: No metal catalysts required
-
A practical direct method for the direct preparation of esters and thioesters from aldehydes is described. Esters and thioesters were synthesized by oxidative esterification and thioesterification via in situ generated acyl bromide intermediates, which were used to react with various alcohols and thiols. The esterification and thioesterification were readily performed in the presence of dibromoisocyanuric acid in dichloromethane, without any metal catalysts and under mild conditions. By using this reaction protocol, various esters and thioesters were prepared in high yields. This effective method offers a promising approach for the facile esterification and thioesterification of aldehydes.
- Kwon, Young-Do,La, Minh Thanh,Kim, Hee-Kwon
-
p. 10833 - 10841
(2018/07/05)
-