Products Categories
CAS No.: | 2713-31-7 |
---|---|
Name: | 2,5-Difluorophenol |
Article Data: | 8 |
Molecular Structure: | |
Formula: | C6H4F2O |
Molecular Weight: | 130.094 |
Synonyms: | NSC 10288; |
Density: | 1.351 g/cm3 |
Melting Point: | 40-42 °C(lit.) |
Boiling Point: | 157.1 °C at 760 mmHg |
Flash Point: | 53.3 °C |
Solubility: | slightly soluble in water |
Appearance: | white crystalline mass |
Hazard Symbols: | Xn, Xi, C, F |
Risk Codes: | 10-20/21/22-36/37/38-34-11 |
Safety: | 16-26-36/37-45-36/37/39-36 |
Transport Information: | UN 1325 4.1/PG 2 |
PSA: | 20.23000 |
LogP: | 1.67040 |
Conditions | Yield |
---|---|
With water; sodium hydroxide at 80 - 155℃; for 35h; Sealed tube; | 94.1% |
Conditions | Yield |
---|---|
With dihydrogen peroxide In acetonitrile at 60℃; for 0.416667h; | A 6% B 94% |
Conditions | Yield |
---|---|
With acetic acid; Selectfluor; eosin y In water at 20℃; for 6h; Irradiation; Green chemistry; | 70% |
Conditions | Yield |
---|---|
Yield given. Multistep reaction; |
para-difluorobenzene
A
1,2,4-trifluorobenzene
B
2,5-difluorophenol
C
4H/5H-3,3,4,5,6,6-Hexafluor-cyclohexen
D
3,3,6,6-tetrafluoro-1,4-cyclohexadiene
Conditions | Yield |
---|---|
With trifluorormethanesulfonic acid; fluorine In trichlorofluoromethane at -25℃; for 3h; Further byproducts given. Title compound not separated from byproducts; |
Conditions | Yield |
---|---|
With hydrogenchloride; n-butyllithium; dihydrogen peroxide In tetrahydrofuran; hexane; toluene | |
With hydrogenchloride; n-butyllithium; dihydrogen peroxide In tetrahydrofuran; hexane; toluene |
para-difluorobenzene
A
4-Fluorophenol
B
2,4-difluorophenol
C
2,5-difluorophenol
D
hydrogen fluoride
Conditions | Yield |
---|---|
With dihydrogen peroxide In acetonitrile at 60℃; for 15h; Catalytic behavior; |
2,5-difluorophenol
N,N-diethylcarbamyl chloride
O-2,5-difluorophenyl N,N-diethylcarbamate
Conditions | Yield |
---|---|
With potassium carbonate In acetonitrile at 70℃; for 13.5h; | 100% |
Stage #1: 2,5-difluorophenol With sodium hydroxide In tetrahydrofuran for 0.166667h; Stage #2: N,N-diethylcarbamyl chloride In tetrahydrofuran at 20℃; for 24h; | 92% |
Stage #1: 2,5-difluorophenol With sodium hydroxide In tetrahydrofuran at 20℃; for 0.166667h; Stage #2: N,N-diethylcarbamyl chloride In tetrahydrofuran at 20℃; for 24h; | |
Stage #1: 2,5-difluorophenol With sodium hydroxide In tetrahydrofuran at 20℃; for 0.166667h; Inert atmosphere; Stage #2: N,N-diethylcarbamyl chloride In tetrahydrofuran at 20℃; for 24h; Inert atmosphere; |
Conditions | Yield |
---|---|
at 170℃; for 1h; | 99% |
Hazard Code:Xn,Xi,C,F
Risk Statements:10-20/21/22-36/37/38-34-11
10:Flammable
20/21/22:Harmful by inhalation, in contact with skin and if swallowed
36/37/38:Irritating to eyes, respiratory system and skin
34:Causes burns
11:Highly Flammable
Safety Statements:16-26-36/37-45-36/37/39-36
16:Keep away from sources of ignition - No smoking
26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
36/37/39:Wear suitable protective clothing, gloves and eye/face protection
36:Wear suitable protective clothing
RIDADR:UN 1325 4.1/PG 2
WGK Germany:3
Hazard Note:Irritant
HazardClass:4.1
PackingGroup:II
Chemical Stability:Stable under normal temperatures and pressures.
Conditions to Avoid:Incompatible materials, ignition sources.
Incompatibilities with Other Materials:Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization:Will not occur.